Home > Salary > Turkey > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 197,035 TRY
Estimated Monthly Salary: 16,420 TRY
Estimated Weekly Salary: 3,789 TRY per week
Estimated Hourly Salary: 95 TRY per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 15,900 TRY
Estimated Weekly Salary: 3,669 TRY per week
Estimated Hourly Salary: 92 TRY per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 10,405 USD
Estimated Monthly Salary: 867 USD
Estimated Weekly Salary: 200 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 197,035 TRY
Estimated Monthly Salary: 16,420 TRY
Estimated Weekly Salary: 3,789 TRY per week
Estimated Hourly Salary: 95 TRY per hour
By working as Metrology Calibration Technician a person can save up to 443 USD per month or 5,322 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Turkey, see costs of living in Turkey.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Senior program manager new product introduction (545,941 TRY per year, pre-tax.)
Real estate broker (193,946 TRY per year, pre-tax.)
Unit secretary emergency room (er) (82,456 TRY per year, pre-tax.)
Technical support consultant (164,912 TRY per year, pre-tax.)
Critical care nurse (310,997 TRY per year, pre-tax.)
Metrology Calibration Technician salary in Turkey
Average Yearly Salary of Metrology Calibration Technician in Turkey is approximately 197,035 TRY (10,405 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 197,035 TRY
Estimated Monthly Salary: 16,420 TRY
Estimated Weekly Salary: 3,789 TRY per week
Estimated Hourly Salary: 95 TRY per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 190,798 TRYEstimated Monthly Salary: 15,900 TRY
Estimated Weekly Salary: 3,669 TRY per week
Estimated Hourly Salary: 92 TRY per hour
Last revision of data: 2024-01-09Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 10,405 USD
Estimated Monthly Salary: 867 USD
Estimated Weekly Salary: 200 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Turkey, officially known as the Republic of Turkey, is a transcontinental country located mainly on the Anatolian Peninsula in Western Asia, with a smaller portion on the Balkan Peninsula in Southeast Europe. It has a population of approximately 82 million people, making it one of the most populous countries in the world. The land area of Turkey is about 783,356 square kilometers, making it larger than many European countries.
Estimated national average yearly salary is 182,974 TRY (10,590 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Turkey.
Comparison shows that a person working as Metrology Calibration Technician in Turkey earns on average:
1.08 times the average salary (or 108% of average salary).
Estimated national average yearly salary is 182,974 TRY (10,590 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Turkey.
Comparison shows that a person working as Metrology Calibration Technician in Turkey earns on average:
1.08 times the average salary (or 108% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 216,739 TRY and 285,701 TRY. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in Turkey?
Living in Turkey the approximate monthly expenses are: 424 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 197,035 TRY
Estimated Monthly Salary: 16,420 TRY
Estimated Weekly Salary: 3,789 TRY per week
Estimated Hourly Salary: 95 TRY per hour
By working as Metrology Calibration Technician a person can save up to 443 USD per month or 5,322 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Turkey, see costs of living in Turkey.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Greece, Bulgaria, Georgia, Armenia, Azerbaijan, Iran, Iraq, Syria.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Greece is 21,344 USD
Iran is 7,781 USD
Iraq is 5,869 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Turkey
(2,099,459 TRY per year, pre-tax.)
2. Cardiologist
(1,754,102 TRY per year, pre-tax.)
(1,691,394 TRY per year, pre-tax.)
(1,640,570 TRY per year, pre-tax.)
5. Neurosurgeon
(1,632,934 TRY per year, pre-tax.)
(1,598,581 TRY per year, pre-tax.)
7. Oncologist
(1,595,801 TRY per year, pre-tax.)
(1,594,037 TRY per year, pre-tax.)
(1,593,001 TRY per year, pre-tax.)
(1,592,836 TRY per year, pre-tax.)
Data as of 2025Random salary:
Senior program manager new product introduction (545,941 TRY per year, pre-tax.)
Real estate broker (193,946 TRY per year, pre-tax.)
Unit secretary emergency room (er) (82,456 TRY per year, pre-tax.)
Technical support consultant (164,912 TRY per year, pre-tax.)
Critical care nurse (310,997 TRY per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=turkey&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-turkey-2025.jpg' alt='metrology calibration technician salary in turkey 2025' title='metrology calibration technician salary in turkey 2025' /></a>
Please note:The salary figures presented here are meant for reference purposes solely.
Salary details displayed on this website are meant for reference purposes exclusively. Our data is sourced through multiple inputs and may not always be up to date. Users should verify salary information through other means before making financial commitments. The figures shown here may change due to factors such as company policies, experience levels, and demand shifts. We do not guarantee that the data displayed is error-free. By accessing this website, you agree that salary information is presented 'as is' and without warranties.
The salary data on this site is designed for informational purposes exclusively. We provide salary insights based on multiple sources, but cannot guarantee absolute precision. Users should always cross-check salary details with other trusted sources before making career-related choices. Fluctuations in salary amounts may occur due to various factors, including location, experience, and industry. We do not extend any guarantee regarding the completeness of the displayed salary information. Use of this website implies acceptance of these conditions.