Home > Salary > Turkey > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 254,125 TRY
Estimated Monthly Salary: 21,177 TRY
Estimated Weekly Salary: 4,887 TRY per week
Estimated Hourly Salary: 122 TRY per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 20,469 TRY
Estimated Weekly Salary: 4,724 TRY per week
Estimated Hourly Salary: 118 TRY per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 13,409 USD
Estimated Monthly Salary: 1,117 USD
Estimated Weekly Salary: 258 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 254,125 TRY
Estimated Monthly Salary: 21,177 TRY
Estimated Weekly Salary: 4,887 TRY per week
Estimated Hourly Salary: 122 TRY per hour
By working as Injection Molding Engineer a person can save up to 694 USD per month or 8,326 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Turkey, see costs of living in Turkey.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Project management intern (113,447 TRY per year, pre-tax.)
.net senior developer (225,063 TRY per year, pre-tax.)
Real estate marketing coordinator (228,095 TRY per year, pre-tax.)
Fitness technician (127,205 TRY per year, pre-tax.)
Laboratory support technician (75,983 TRY per year, pre-tax.)
Injection Molding Engineer salary in Turkey
Average Yearly Salary of Injection Molding Engineer in Turkey is approximately 254,125 TRY (13,409 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 254,125 TRY
Estimated Monthly Salary: 21,177 TRY
Estimated Weekly Salary: 4,887 TRY per week
Estimated Hourly Salary: 122 TRY per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 245,632 TRYEstimated Monthly Salary: 20,469 TRY
Estimated Weekly Salary: 4,724 TRY per week
Estimated Hourly Salary: 118 TRY per hour
Last revision of data: 2024-01-06Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 13,409 USD
Estimated Monthly Salary: 1,117 USD
Estimated Weekly Salary: 258 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Turkey, officially known as the Republic of Turkey, is a transcontinental country located mainly on the Anatolian Peninsula in Western Asia, with a smaller portion on the Balkan Peninsula in Southeast Europe. It has a population of approximately 82 million people, making it one of the most populous countries in the world. The land area of Turkey is about 783,356 square kilometers, making it larger than many European countries.
Estimated national average yearly salary is 182,974 TRY (10,590 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Turkey.
Comparison shows that a person working as Injection Molding Engineer in Turkey earns on average:
1.39 times the average salary (or 139% of average salary).
Estimated national average yearly salary is 182,974 TRY (10,590 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Turkey.
Comparison shows that a person working as Injection Molding Engineer in Turkey earns on average:
1.39 times the average salary (or 139% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 279,538 TRY and 368,481 TRY. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Turkey?
Living in Turkey the approximate monthly expenses are: 424 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 254,125 TRY
Estimated Monthly Salary: 21,177 TRY
Estimated Weekly Salary: 4,887 TRY per week
Estimated Hourly Salary: 122 TRY per hour
By working as Injection Molding Engineer a person can save up to 694 USD per month or 8,326 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Turkey, see costs of living in Turkey.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Greece, Bulgaria, Georgia, Armenia, Azerbaijan, Iran, Iraq, Syria.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Greece is 27,502 USD
Iran is 9,975 USD
Iraq is 7,559 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Turkey
(2,099,459 TRY per year, pre-tax.)
2. Cardiologist
(1,754,102 TRY per year, pre-tax.)
(1,691,394 TRY per year, pre-tax.)
(1,640,570 TRY per year, pre-tax.)
5. Neurosurgeon
(1,632,934 TRY per year, pre-tax.)
(1,598,581 TRY per year, pre-tax.)
7. Oncologist
(1,595,801 TRY per year, pre-tax.)
(1,594,037 TRY per year, pre-tax.)
(1,593,001 TRY per year, pre-tax.)
(1,592,836 TRY per year, pre-tax.)
Data as of 2025Random salary:
Project management intern (113,447 TRY per year, pre-tax.)
.net senior developer (225,063 TRY per year, pre-tax.)
Real estate marketing coordinator (228,095 TRY per year, pre-tax.)
Fitness technician (127,205 TRY per year, pre-tax.)
Laboratory support technician (75,983 TRY per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=turkey&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-turkey-2025.jpg' alt='injection molding engineer salary in turkey 2025' title='injection molding engineer salary in turkey 2025' /></a>
Please note:The salary figures on this website are meant for reference use only.
This website aggregates salary data for reference use exclusively. We attempt to provide reliable figures, but cannot guarantee their validity. Users are encouraged to check alternative sources before making financial decisions. Salary ranges can vary due to company policies, market demands, and skills. We accept no liability for inconsistencies in the salary data provided. Your engagement with this site indicates agreement of this disclaimer.
Salary information displayed on this site is for reference exclusively. Our figures come from various inputs, but we cannot guarantee their accuracy. Users should always double-check salary details with additional resources before making job-related decisions. Salaries differ due to economic trends, job location, and negotiation skills. We cannot offer any warranties about the validity of the provided salary data. By continuing to use this site, you agree these terms.