Home > Salary > Iraq > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 6,942,570 IQD
Estimated Monthly Salary: 578,548 IQD
Estimated Weekly Salary: 133,511 IQD per week
Estimated Hourly Salary: 3,338 IQD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 557,356 IQD
Estimated Weekly Salary: 128,621 IQD per week
Estimated Hourly Salary: 3,216 IQD per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 4,678 USD
Estimated Monthly Salary: 390 USD
Estimated Weekly Salary: 90 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 6,942,570 IQD
Estimated Monthly Salary: 578,548 IQD
Estimated Weekly Salary: 133,511 IQD per week
Estimated Hourly Salary: 3,338 IQD per hour
By working as Lathe Operator Numerical Control a person can save up to 150 USD per month or 1,798 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Iraq, see costs of living in Iraq.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Contact tracer (6,910,755 IQD per year, pre-tax.)
Residential care attendant (rca) (4,265,196 IQD per year, pre-tax.)
Office management assistant (7,741,439 IQD per year, pre-tax.)
Maintenance supervisor (7,365,540 IQD per year, pre-tax.)
Ramp agent (4,942,470 IQD per year, pre-tax.)
Lathe Operator Numerical Control salary in Iraq
Average Yearly Salary of Lathe Operator Numerical Control in Iraq is approximately 6,942,570 IQD (4,678 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 6,942,570 IQD
Estimated Monthly Salary: 578,548 IQD
Estimated Weekly Salary: 133,511 IQD per week
Estimated Hourly Salary: 3,338 IQD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 6,688,266 IQDEstimated Monthly Salary: 557,356 IQD
Estimated Weekly Salary: 128,621 IQD per week
Estimated Hourly Salary: 3,216 IQD per hour
Last revision of data: 2024-01-06Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 4,678 USD
Estimated Monthly Salary: 390 USD
Estimated Weekly Salary: 90 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Iraq, a nation in the Middle East, possesses vast oil reserves, fueling its economy and global energy trade. Key industries include oil and gas extraction, agriculture, and a burgeoning construction sector as the nation rebuilds its infrastructure. The rich historical and cultural heritage also draws tourists. However, Iraq faces challenges including political instability and security concerns. Despite these, the country exhibits economic potential and a resilient population, striving to rebuild and diversify its economy beyond oil and embrace a future of growth and stability.
Estimated national average yearly salary is 8,160,000 IQD (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Iraq.
Comparison shows that a person working as Lathe Operator Numerical Control in Iraq earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 8,160,000 IQD (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Iraq.
Comparison shows that a person working as Lathe Operator Numerical Control in Iraq earns on average:
0.85 times the average salary (or 85% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 7,636,827 IQD and 10,066,727 IQD. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Iraq?
Living in Iraq the approximate monthly expenses are: 240 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 6,942,570 IQD
Estimated Monthly Salary: 578,548 IQD
Estimated Weekly Salary: 133,511 IQD per week
Estimated Hourly Salary: 3,338 IQD per hour
By working as Lathe Operator Numerical Control a person can save up to 150 USD per month or 1,798 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Iraq, see costs of living in Iraq.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Iran, Jordan, Kuwait, Saudi Arabia, Syria, Turkey. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Iran is 6,156 USD
Jordan is 7,387 USD
Kuwait is 10,413 USD
Saudi Arabia is 21,529 USD
Syria is 2,863 USD
Turkey is 8,268 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Iraq
(93,035,848 IQD per year, pre-tax.)
2. Cardiologist
(77,420,383 IQD per year, pre-tax.)
(74,436,118 IQD per year, pre-tax.)
4. Neurosurgeon
(72,585,795 IQD per year, pre-tax.)
(72,416,543 IQD per year, pre-tax.)
(70,778,229 IQD per year, pre-tax.)
(70,769,927 IQD per year, pre-tax.)
(70,594,393 IQD per year, pre-tax.)
9. Urologist
(70,443,660 IQD per year, pre-tax.)
10. Oncologist
(70,429,777 IQD per year, pre-tax.)
Data as of 2025Random salary:
Contact tracer (6,910,755 IQD per year, pre-tax.)
Residential care attendant (rca) (4,265,196 IQD per year, pre-tax.)
Office management assistant (7,741,439 IQD per year, pre-tax.)
Maintenance supervisor (7,365,540 IQD per year, pre-tax.)
Ramp agent (4,942,470 IQD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=iraq&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-iraq-2025.jpg' alt='lathe operator numerical control salary in iraq 2025' title='lathe operator numerical control salary in iraq 2025' /></a>
Please note:This website presents salary insights for informational purposes exclusively.
Salary details presented on optisalary.com are meant for informational purposes exclusively. Our data comes from multiple sources and may not necessarily be up to date. Users must cross-reference salary information through other means before making financial commitments. The figures listed here may change due to variables such as company policies, experience levels, and demand shifts. We do not warrant that the data provided is flawless. By using optisalary.com, you accept that salary information is offered 'as is' and without assurances.
This website displays salary data exclusively for reference purposes. While we strive for correctness, we cannot guarantee the precision of all figures. Users must verify salary details with official sources before making financial plans. Salary estimates may fluctuate based on multiple factors, such as geographic location, experience, and job role. We accept no liability for errors in the salary estimates provided. By using optisalary.com, you accept that salary data is not absolute.