Home > Salary > Ukraine > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 96,232 UAH
Estimated Monthly Salary: 8,019 UAH
Estimated Weekly Salary: 1,851 UAH per week
Estimated Hourly Salary: 46 UAH per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 7,760 UAH
Estimated Weekly Salary: 1,791 UAH per week
Estimated Hourly Salary: 45 UAH per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 3,318 USD
Estimated Monthly Salary: 277 USD
Estimated Weekly Salary: 64 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 96,232 UAH
Estimated Monthly Salary: 8,019 UAH
Estimated Weekly Salary: 1,851 UAH per week
Estimated Hourly Salary: 46 UAH per hour
By working as Lathe Operator Numerical Control a person can save up to 106 USD per month or 1,268 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ukraine, see costs of living in Ukraine.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Pump station operator (92,391 UAH per year, pre-tax.)
Aircraft and powerplant (ap), mechanic (127,500 UAH per year, pre-tax.)
Service writer (50,575 UAH per year, pre-tax.)
Helicopter pilot (135,843 UAH per year, pre-tax.)
Pediatrics nurse practitioner (np) (222,720 UAH per year, pre-tax.)
Lathe Operator Numerical Control salary in Ukraine
Average Yearly Salary of Lathe Operator Numerical Control in Ukraine is approximately 96,232 UAH (3,318 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 96,232 UAH
Estimated Monthly Salary: 8,019 UAH
Estimated Weekly Salary: 1,851 UAH per week
Estimated Hourly Salary: 46 UAH per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 93,119 UAHEstimated Monthly Salary: 7,760 UAH
Estimated Weekly Salary: 1,791 UAH per week
Estimated Hourly Salary: 45 UAH per hour
Last revision of data: 2024-01-05Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 3,318 USD
Estimated Monthly Salary: 277 USD
Estimated Weekly Salary: 64 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ukraine, located in Eastern Europe, is a country with a rich history and diverse culture. It has a population of approximately 44 million people and covers an area of about 603,550 square kilometers. The country shares borders with several countries including Russia, Belarus, Poland, Slovakia, Hungary, Romania, and Moldova.
Estimated national average yearly salary is 112,216 UAH (4,270 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Ukraine.
Comparison shows that a person working as Lathe Operator Numerical Control in Ukraine earns on average:
0.86 times the average salary (or 86% of average salary).
Estimated national average yearly salary is 112,216 UAH (4,270 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Ukraine.
Comparison shows that a person working as Lathe Operator Numerical Control in Ukraine earns on average:
0.86 times the average salary (or 86% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 105,855 UAH and 139,536 UAH. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Ukraine?
Living in Ukraine the approximate monthly expenses are: 171 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 96,232 UAH
Estimated Monthly Salary: 8,019 UAH
Estimated Weekly Salary: 1,851 UAH per week
Estimated Hourly Salary: 46 UAH per hour
By working as Lathe Operator Numerical Control a person can save up to 106 USD per month or 1,268 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ukraine, see costs of living in Ukraine.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Belarus, Russia, Poland, Slovakia, Hungary, Romania, Moldova. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Russia is 9,960 USD
Poland is 14,287 USD
Slovakia is 17,109 USD
Hungary is 14,767 USD
Romania is 12,198 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ukraine
(1,288,838 UAH per year, pre-tax.)
2. Cardiologist
(1,079,208 UAH per year, pre-tax.)
(1,036,905 UAH per year, pre-tax.)
4. Neurosurgeon
(1,009,722 UAH per year, pre-tax.)
(1,006,006 UAH per year, pre-tax.)
(985,515 UAH per year, pre-tax.)
(985,387 UAH per year, pre-tax.)
(981,998 UAH per year, pre-tax.)
9. Urologist
(981,931 UAH per year, pre-tax.)
10. Oncologist
(981,624 UAH per year, pre-tax.)
Data as of 2025Random salary:
Pump station operator (92,391 UAH per year, pre-tax.)
Aircraft and powerplant (ap), mechanic (127,500 UAH per year, pre-tax.)
Service writer (50,575 UAH per year, pre-tax.)
Helicopter pilot (135,843 UAH per year, pre-tax.)
Pediatrics nurse practitioner (np) (222,720 UAH per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ukraine&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-ukraine-2025.jpg' alt='lathe operator numerical control salary in ukraine 2025' title='lathe operator numerical control salary in ukraine 2025' /></a>
Please note:Salary information displayed on this site is for reference only.
The salary estimates on this website are meant for informational purposes exclusively. We compile salary data from multiple sources, but do not ensure complete precision. Users must on their own confirm salaries before making financial commitments. Salary variations occur due to industry standards, demand shifts, and location. We disclaim any guarantee regarding the validity of the provided salary data. By using this site, you acknowledge that salary data is not definitive.
optisalary.com aggregates salary data for reference use only. While we endeavor to deliver correct figures, we cannot warrant their absolute precision. Users are strongly advised to check with additional sources before finalizing financial plans. Salary amounts vary based on multiple conditions, such as location, job role, and individual qualifications. We do not offer any guarantees as to the correctness of the listed data. Your use of this site indicates agreement of this disclaimer.