Home > Salary > Syria > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 42,218,785 SYP
Estimated Monthly Salary: 3,518,232 SYP
Estimated Weekly Salary: 811,900 SYP per week
Estimated Hourly Salary: 20,297 SYP per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,409,520 SYP
Estimated Weekly Salary: 786,812 SYP per week
Estimated Hourly Salary: 19,670 SYP per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 2,861 USD
Estimated Monthly Salary: 238 USD
Estimated Weekly Salary: 55 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 42,218,785 SYP
Estimated Monthly Salary: 3,518,232 SYP
Estimated Weekly Salary: 811,900 SYP per week
Estimated Hourly Salary: 20,297 SYP per hour
By working as Mechanical Calibration Technician a person can save up to 92 USD per month or 1,099 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Syria, see costs of living in Syria.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Dry cleaning manager (20,722,864 SYP per year, pre-tax.)
Lab coordinator (35,283,840 SYP per year, pre-tax.)
Associate director sales and marketing (78,059,104 SYP per year, pre-tax.)
Senior human resources (hr), generalist (53,807,856 SYP per year, pre-tax.)
Food product development technician (38,812,224 SYP per year, pre-tax.)
Mechanical Calibration Technician salary in Syria
Average Yearly Salary of Mechanical Calibration Technician in Syria is approximately 42,218,785 SYP (2,861 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 42,218,785 SYP
Estimated Monthly Salary: 3,518,232 SYP
Estimated Weekly Salary: 811,900 SYP per week
Estimated Hourly Salary: 20,297 SYP per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 40,914,240 SYPEstimated Monthly Salary: 3,409,520 SYP
Estimated Weekly Salary: 786,812 SYP per week
Estimated Hourly Salary: 19,670 SYP per hour
Last revision of data: 2024-01-06Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,861 USD
Estimated Monthly Salary: 238 USD
Estimated Weekly Salary: 55 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Syria, located in the Middle East, is a country with a rich history and diverse culture. It has a population of approximately 18 million people and covers an area of about 185,180 square kilometers. The country is bordered by Turkey to the north, Iraq to the east, Jordan to the south, Israel to the southwest, and Lebanon to the west.
Estimated national average yearly salary is 49,912,000 SYP (3,670 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Syria.
Comparison shows that a person working as Mechanical Calibration Technician in Syria earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 49,912,000 SYP (3,670 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Syria.
Comparison shows that a person working as Mechanical Calibration Technician in Syria earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 46,440,664 SYP and 61,217,238 SYP. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Syria?
Living in Syria the approximate monthly expenses are: 147 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 42,218,785 SYP
Estimated Monthly Salary: 3,518,232 SYP
Estimated Weekly Salary: 811,900 SYP per week
Estimated Hourly Salary: 20,297 SYP per hour
By working as Mechanical Calibration Technician a person can save up to 92 USD per month or 1,099 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Syria, see costs of living in Syria.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Lebanon, Turkey, Iraq, Jordan, Israel. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Lebanon is 6,456 USD
Turkey is 8,256 USD
Iraq is 4,677 USD
Jordan is 7,369 USD
Israel is 42,444 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Syria
(567,437,175 SYP per year, pre-tax.)
2. Cardiologist
(471,045,080 SYP per year, pre-tax.)
(457,930,799 SYP per year, pre-tax.)
4. Neurosurgeon
(443,174,758 SYP per year, pre-tax.)
(442,140,920 SYP per year, pre-tax.)
(431,663,472 SYP per year, pre-tax.)
(431,205,692 SYP per year, pre-tax.)
(431,022,267 SYP per year, pre-tax.)
9. Urologist
(430,771,570 SYP per year, pre-tax.)
(430,592,646 SYP per year, pre-tax.)
Data as of 2025Random salary:
Dry cleaning manager (20,722,864 SYP per year, pre-tax.)
Lab coordinator (35,283,840 SYP per year, pre-tax.)
Associate director sales and marketing (78,059,104 SYP per year, pre-tax.)
Senior human resources (hr), generalist (53,807,856 SYP per year, pre-tax.)
Food product development technician (38,812,224 SYP per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=syria&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-syria-2025.jpg' alt='mechanical calibration technician salary in syria 2025' title='mechanical calibration technician salary in syria 2025' /></a>
Please note:Salary data displayed on this site is informational exclusively.
This website compiles salary data for reference purposes exclusively. While we strive to deliver accurate figures, we cannot warrant their absolute precision. Users are strongly advised to check with additional databases before finalizing financial plans. Salary amounts fluctuate based on several conditions, such as location, job role, and individual qualifications. We make no guarantees as to the validity of the listed data. Your use of this site acknowledges acceptance of this notice.
By using optisalary.com, you accept that salary details are subject to change.