Home > Salary > Syria > Engine Lathe Setup Operator
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Estimated Yearly Salary: 44,689,579 SYP
Estimated Monthly Salary: 3,724,132 SYP
Estimated Weekly Salary: 859,415 SYP per week
Estimated Hourly Salary: 21,485 SYP per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,607,173 SYP
Estimated Weekly Salary: 832,425 SYP per week
Estimated Hourly Salary: 20,811 SYP per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 3,027 USD
Estimated Monthly Salary: 252 USD
Estimated Weekly Salary: 58 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 44,689,579 SYP
Estimated Monthly Salary: 3,724,132 SYP
Estimated Weekly Salary: 859,415 SYP per week
Estimated Hourly Salary: 21,485 SYP per hour
By working as Engine Lathe Setup Operator a person can save up to 105 USD per month or 1,265 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Syria, see costs of living in Syria.
Estimated Yearly Salary for Engine Lathe Setup Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Loan counselor (29,109,168 SYP per year, pre-tax.)
Dressmaker (20,722,864 SYP per year, pre-tax.)
Library assistant clerical (28,814,023 SYP per year, pre-tax.)
Director of program management computer software (123,928,096 SYP per year, pre-tax.)
Insurance claims service consultant (82,992,699 SYP per year, pre-tax.)
Engine Lathe Setup Operator salary in Syria
Average Yearly Salary of Engine Lathe Setup Operator in Syria is approximately 44,689,579 SYP (3,027 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Engine Lathe Setup Operator do?
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Skills: Engine lathe setup operator, Machining, Metalworking, Precision, Manufacturing, Mechanical engineering.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Engine Lathe Setup Operator make?
Salary details
How much does Engine Lathe Setup Operator make?Estimated Yearly Salary: 44,689,579 SYP
Estimated Monthly Salary: 3,724,132 SYP
Estimated Weekly Salary: 859,415 SYP per week
Estimated Hourly Salary: 21,485 SYP per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 43,286,080 SYPEstimated Monthly Salary: 3,607,173 SYP
Estimated Weekly Salary: 832,425 SYP per week
Estimated Hourly Salary: 20,811 SYP per hour
Last revision of data: 2024-01-03Engine Lathe Setup Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 3,027 USD
Estimated Monthly Salary: 252 USD
Estimated Weekly Salary: 58 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Syria, located in the Middle East, is a country with a rich history and diverse culture. It has a population of approximately 18 million people and covers an area of about 185,180 square kilometers. The country is bordered by Turkey to the north, Iraq to the east, Jordan to the south, Israel to the southwest, and Lebanon to the west.
Estimated national average yearly salary is 49,912,000 SYP (3,670 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Syria.
Comparison shows that a person working as Engine Lathe Setup Operator in Syria earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 49,912,000 SYP (3,670 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Syria.
Comparison shows that a person working as Engine Lathe Setup Operator in Syria earns on average:
0.9 times the average salary (or 90% of average salary).
Is Engine Lathe Setup Operator a well paid job?
Yes, our data show that Engine Lathe Setup Operator is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Engine Lathe Setup Operator?
High salary for Engine Lathe Setup Operator would be somewhere between 49,158,537 SYP and 64,799,890 SYP. However this is an estimation based on Gaussian Distribution.How much can you save working as Engine Lathe Setup Operator in Syria?
Living in Syria the approximate monthly expenses are: 147 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 44,689,579 SYP
Estimated Monthly Salary: 3,724,132 SYP
Estimated Weekly Salary: 859,415 SYP per week
Estimated Hourly Salary: 21,485 SYP per hour
By working as Engine Lathe Setup Operator a person can save up to 105 USD per month or 1,265 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Syria, see costs of living in Syria.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Lebanon, Turkey, Iraq, Jordan, Israel. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Engine Lathe Setup Operator
Lebanon is 6,840 USD
Turkey is 8,707 USD
Iraq is 4,922 USD
Jordan is 7,810 USD
Israel is 44,932 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Syria
(567,437,175 SYP per year, pre-tax.)
2. Cardiologist
(471,045,080 SYP per year, pre-tax.)
(457,930,799 SYP per year, pre-tax.)
4. Neurosurgeon
(443,174,758 SYP per year, pre-tax.)
(442,140,920 SYP per year, pre-tax.)
(431,663,472 SYP per year, pre-tax.)
(431,205,692 SYP per year, pre-tax.)
(431,022,267 SYP per year, pre-tax.)
9. Urologist
(430,771,570 SYP per year, pre-tax.)
(430,592,646 SYP per year, pre-tax.)
Data as of 2025Random salary:
Loan counselor (29,109,168 SYP per year, pre-tax.)
Dressmaker (20,722,864 SYP per year, pre-tax.)
Library assistant clerical (28,814,023 SYP per year, pre-tax.)
Director of program management computer software (123,928,096 SYP per year, pre-tax.)
Insurance claims service consultant (82,992,699 SYP per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=syria&job=engine-lathe-setup-operator'><img src='https://optisalary.com/wp-content/graphs/salary/engine-lathe-setup-operator-salary-in-syria-2025.jpg' alt='engine lathe setup operator salary in syria 2025' title='engine lathe setup operator salary in syria 2025' /></a>
Please note:This website aggregates salary data for informational purposes only.
All salary data on optisalary.com are for reference purposes only. We gather data from numerous trusted databases, yet do not guarantee complete accuracy. Before making career decisions, users should cross-check with external verified sources. Salaries change due to various factors, including economic conditions, job market trends, and geographic location. We disclaim any liability for errors in the salary estimates provided here. Your use with optisalary.com indicates agreement of this disclaimer.
The salary data presented here are meant for reference purposes only. While we strive to ensure accuracy, we do not guarantee all figures is flawless. Users are advised to confirm salary details with independent sources before making important career decisions. Salary ranges may fluctuate due to economic shifts, demand variations, and regional factors. We deny responsibility for inaccuracies in the salary data displayed.