Home > Salary > Sweden > Senior Tooling Engineer
A senior tooling engineer is responsible for designing, developing, and implementing tools and equipment used in manufacturing processes. They work closely with cross-functional teams to understand production requirements and develop innovative solutions to enhance productivity, efficiency, and quality. Senior tooling engineers also provide technical expertise and guidance to junior engineers and technicians in the design, fabrication, and maintenance of tools and equipment. They conduct feasibility studies, cost analysis, and risk assessments to ensure the successful implementation of new tooling technologies. Additionally, they collaborate with suppliers to source and evaluate new materials and technologies that can improve tooling performance.
Estimated Yearly Salary: 1,332,309 SEK
Estimated Monthly Salary: 111,026 SEK
Estimated Weekly Salary: 25,621 SEK per week
Estimated Hourly Salary: 641 SEK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 107,623 SEK
Estimated Weekly Salary: 24,836 SEK per week
Estimated Hourly Salary: 621 SEK per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 121,060 USD
Estimated Monthly Salary: 10,088 USD
Estimated Weekly Salary: 2,328 USD per week
Estimated Hourly Salary: 58 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,332,309 SEK
Estimated Monthly Salary: 111,026 SEK
Estimated Weekly Salary: 25,621 SEK per week
Estimated Hourly Salary: 641 SEK per hour
By working as Senior Tooling Engineer a person can save up to 7,569 USD per month or 90,825 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sweden, see costs of living in Sweden.
Estimated Yearly Salary for Senior Tooling Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Meat department supervisor (471,185 SEK per year, pre-tax.)
Business development consultant (650,990 SEK per year, pre-tax.)
Waiterwaitress hotel (257,908 SEK per year, pre-tax.)
It audit consultant (785,455 SEK per year, pre-tax.)
Youth therapist (526,992 SEK per year, pre-tax.)
Senior Tooling Engineer salary in Sweden
Average Yearly Salary of Senior Tooling Engineer in Sweden is approximately 1,332,309 SEK (121,060 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Senior Tooling Engineer do?

Skills: senior tooling engineer, manufacturing, tool design, equipment development, process improvement, technical expertise
Job industry: Manufacturing
Job industry: Manufacturing
How much does Senior Tooling Engineer make?
Salary details
How much does Senior Tooling Engineer make?Estimated Yearly Salary: 1,332,309 SEK
Estimated Monthly Salary: 111,026 SEK
Estimated Weekly Salary: 25,621 SEK per week
Estimated Hourly Salary: 641 SEK per hour
Comparing salary to last year:
Estimated Yearly Salary: 1,291,477 SEKEstimated Monthly Salary: 107,623 SEK
Estimated Weekly Salary: 24,836 SEK per week
Estimated Hourly Salary: 621 SEK per hour
Senior Tooling Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 121,060 USD
Estimated Monthly Salary: 10,088 USD
Estimated Weekly Salary: 2,328 USD per week
Estimated Hourly Salary: 58 USD per hour
Difference in salary year over year or average salary increase is approximately
About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sweden is a Scandinavian country located in Northern Europe. With a population of about 10 million people, it is known for its high standard of living and social welfare system. The country covers an area of approximately 450,000 square kilometers, making it the third-largest country in the European Union.
Estimated national average yearly salary is 619,985 SEK (62,990 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Sweden.
Comparison shows that a person working as Senior Tooling Engineer in Sweden earns on average:
2.15 times the average salary (or 215% of average salary).
Estimated national average yearly salary is 619,985 SEK (62,990 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Sweden.
Comparison shows that a person working as Senior Tooling Engineer in Sweden earns on average:
2.15 times the average salary (or 215% of average salary).
Is Senior Tooling Engineer a well paid job?
Yes, our data show that Senior Tooling Engineer is a very well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Senior Tooling Engineer?
High salary for Senior Tooling Engineer would be somewhere between 1,465,540 SEK and 1,931,848 SEK. However this is an estimation based on Gaussian Distribution.How much can you save working as Senior Tooling Engineer in Sweden?
Living in Sweden the approximate monthly expenses are: 2,520 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,332,309 SEK
Estimated Monthly Salary: 111,026 SEK
Estimated Weekly Salary: 25,621 SEK per week
Estimated Hourly Salary: 641 SEK per hour
By working as Senior Tooling Engineer a person can save up to 7,569 USD per month or 90,825 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sweden, see costs of living in Sweden.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Denmark. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Senior Tooling Engineer
Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
- 6 to 10 years of experience yields
- 11 to 15 years of experience yields
- 16 to 25 years of experience yields
- more than 25 years of experience yields
Top 10 highest salaries in Sweden
(7,223,053 SEK per year, pre-tax.)
2. Cardiologist
(6,013,052 SEK per year, pre-tax.)
(5,814,859 SEK per year, pre-tax.)
4. Neurosurgeon
(5,644,125 SEK per year, pre-tax.)
(5,623,491 SEK per year, pre-tax.)
(5,514,530 SEK per year, pre-tax.)
(5,504,834 SEK per year, pre-tax.)
(5,496,013 SEK per year, pre-tax.)
9. Oncologist
(5,491,612 SEK per year, pre-tax.)
(5,485,345 SEK per year, pre-tax.)
Random salary:
Meat department supervisor (471,185 SEK per year, pre-tax.)
Business development consultant (650,990 SEK per year, pre-tax.)
Waiterwaitress hotel (257,908 SEK per year, pre-tax.)
It audit consultant (785,455 SEK per year, pre-tax.)
Youth therapist (526,992 SEK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.

The salary figures on this website are meant for informational purposes only.
This website aggregates salary data for informational use only. We attempt to provide reliable figures, but do not guarantee their precision. Users are urged to check official sources before making financial decisions. Salary ranges can fluctuate due to company policies, market demands, and skills. We assume no responsibility for inconsistencies in the salary information provided. Your engagement with this site confirms understanding of this policy.
optisalary.com displays salary figures solely for reference use. While we endeavor for correctness, we do not ensure the validity of all figures. Users must double-check salary details with reliable sources before making financial decisions. Salary estimates can fluctuate based on numerous elements, such as geographic location, experience, and job role. We accept no responsibility for misinterpretations in the salary figures provided. By using this website, you accept that salary data is not absolute.