Home > Salary > Sweden > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 540,215 SEK
Estimated Monthly Salary: 45,018 SEK
Estimated Weekly Salary: 10,389 SEK per week
Estimated Hourly Salary: 260 SEK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 43,427 SEK
Estimated Weekly Salary: 10,022 SEK per week
Estimated Hourly Salary: 251 SEK per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 48,882 USD
Estimated Monthly Salary: 4,074 USD
Estimated Weekly Salary: 940 USD per week
Estimated Hourly Salary: 24 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 540,215 SEK
Estimated Monthly Salary: 45,018 SEK
Estimated Weekly Salary: 10,389 SEK per week
Estimated Hourly Salary: 260 SEK per hour
By working as Lathe Operator Numerical Control a person can save up to 1,554 USD per month or 18,647 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sweden, see costs of living in Sweden.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Sap business intelligence consultant (1,029,172 SEK per year, pre-tax.)
Senior statistician (942,251 SEK per year, pre-tax.)
Vice president(vp), nursing (1,577,717 SEK per year, pre-tax.)
Nurse practitioner (1,057,293 SEK per year, pre-tax.)
Cost clerk (515,960 SEK per year, pre-tax.)
Lathe Operator Numerical Control salary in Sweden
Average Yearly Salary of Lathe Operator Numerical Control in Sweden is approximately 540,215 SEK (48,882 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 540,215 SEK
Estimated Monthly Salary: 45,018 SEK
Estimated Weekly Salary: 10,389 SEK per week
Estimated Hourly Salary: 260 SEK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 521,125 SEKEstimated Monthly Salary: 43,427 SEK
Estimated Weekly Salary: 10,022 SEK per week
Estimated Hourly Salary: 251 SEK per hour
Last revision of data: 2024-01-03Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 48,882 USD
Estimated Monthly Salary: 4,074 USD
Estimated Weekly Salary: 940 USD per week
Estimated Hourly Salary: 24 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sweden is a Scandinavian country located in Northern Europe. With a population of about 10 million people, it is known for its high standard of living and social welfare system. The country covers an area of approximately 450,000 square kilometers, making it the third-largest country in the European Union.
Estimated national average yearly salary is 619,985 SEK (62,990 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Sweden.
Comparison shows that a person working as Lathe Operator Numerical Control in Sweden earns on average:
0.87 times the average salary (or 87% of average salary).
Estimated national average yearly salary is 619,985 SEK (62,990 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Sweden.
Comparison shows that a person working as Lathe Operator Numerical Control in Sweden earns on average:
0.87 times the average salary (or 87% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 594,237 SEK and 783,312 SEK. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Sweden?
Living in Sweden the approximate monthly expenses are: 2,520 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 540,215 SEK
Estimated Monthly Salary: 45,018 SEK
Estimated Weekly Salary: 10,389 SEK per week
Estimated Hourly Salary: 260 SEK per hour
By working as Lathe Operator Numerical Control a person can save up to 1,554 USD per month or 18,647 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sweden, see costs of living in Sweden.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Denmark. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Norway is 74,458 USD
Finland is 42,217 USD
Denmark is 56,835 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Sweden
(7,223,053 SEK per year, pre-tax.)
2. Cardiologist
(6,013,052 SEK per year, pre-tax.)
(5,814,859 SEK per year, pre-tax.)
4. Neurosurgeon
(5,644,125 SEK per year, pre-tax.)
(5,623,491 SEK per year, pre-tax.)
(5,514,530 SEK per year, pre-tax.)
(5,504,834 SEK per year, pre-tax.)
(5,496,013 SEK per year, pre-tax.)
9. Oncologist
(5,491,612 SEK per year, pre-tax.)
(5,485,345 SEK per year, pre-tax.)
Data as of 2025Random salary:
Sap business intelligence consultant (1,029,172 SEK per year, pre-tax.)
Senior statistician (942,251 SEK per year, pre-tax.)
Vice president(vp), nursing (1,577,717 SEK per year, pre-tax.)
Nurse practitioner (1,057,293 SEK per year, pre-tax.)
Cost clerk (515,960 SEK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=sweden&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-sweden-2025.jpg' alt='lathe operator numerical control salary in sweden 2025' title='lathe operator numerical control salary in sweden 2025' /></a>
Please note:Salary information displayed on this site is informational only.
This website provides salary figures solely for reference use. While we endeavor for accuracy, we cannot ensure the precision of all figures. Users must double-check salary details with reliable sources before making financial decisions. Salary estimates can fluctuate based on multiple factors, such as company size, negotiation tactics, and industry demand. We assume no liability for errors in the salary figures provided. By accessing this website, you accept that salary data is subject to change.
Salary details presented on optisalary.com are intended for reference purposes exclusively. Our data comes from multiple inputs and may not always be accurate. Users must verify salary information independently before making financial decisions. The figures shown here may change due to factors such as company policies, experience levels, and demand shifts. We cannot guarantee that the data displayed is flawless. By accessing optisalary.com, you agree that salary information is presented 'as is' and without warranties.