Home > Salary > Sudan > Structural Metal Fabricator Fitter
A structural metal fabricator fitter is responsible for assembling and installing metal structures such as beams, columns, and frames. They work closely with blueprints and specifications to measure, cut, shape, and fit metal components together using various tools and equipment. This occupation requires a high level of precision and attention to detail to ensure the structural integrity and safety of the finished product.
The job involves interpreting technical drawings, welding and soldering metal parts, and using specialized machinery like drills, grinders, and cutting torches. Structural metal fabricator fitters also perform quality checks and inspections to ensure that the finished product meets industry standards and client requirements. They may work in various industries such as construction, manufacturing, or engineering.
Estimated Yearly Salary: 408,933 SDG
Estimated Monthly Salary: 34,078 SDG
Estimated Weekly Salary: 7,864 SDG per week
Estimated Hourly Salary: 197 SDG per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 32,973 SDG
Estimated Weekly Salary: 7,609 SDG per week
Estimated Hourly Salary: 190 SDG per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 627 USD
Estimated Monthly Salary: 52 USD
Estimated Weekly Salary: 12 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 408,933 SDG
Estimated Monthly Salary: 34,078 SDG
Estimated Weekly Salary: 7,864 SDG per week
Estimated Hourly Salary: 197 SDG per hour
By working as Structural Metal Fabricator Fitter a person can save up to 22 USD per month or 262 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Estimated Yearly Salary for Structural Metal Fabricator Fitter
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Florist (238,056 SDG per year, pre-tax.)
Medical clinical specialist (624,767 SDG per year, pre-tax.)
Research analyst healthcare (601,080 SDG per year, pre-tax.)
Electronics designer (364,897 SDG per year, pre-tax.)
Data mining specialist (519,739 SDG per year, pre-tax.)
Structural Metal Fabricator Fitter salary in Sudan
Average Yearly Salary of Structural Metal Fabricator Fitter in Sudan is approximately 408,933 SDG (627 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Structural Metal Fabricator Fitter do?
A structural metal fabricator fitter is responsible for assembling and installing metal structures such as beams, columns, and frames. They work closely with blueprints and specifications to measure, cut, shape, and fit metal components together using various tools and equipment. This occupation requires a high level of precision and attention to detail to ensure the structural integrity and safety of the finished product.
The job involves interpreting technical drawings, welding and soldering metal parts, and using specialized machinery like drills, grinders, and cutting torches. Structural metal fabricator fitters also perform quality checks and inspections to ensure that the finished product meets industry standards and client requirements. They may work in various industries such as construction, manufacturing, or engineering.
Skills: structural metal fabricator, metal fabrication, metal fitting, welding, blueprint interpretation, quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Structural Metal Fabricator Fitter make?
Salary details
How much does Structural Metal Fabricator Fitter make?Estimated Yearly Salary: 408,933 SDG
Estimated Monthly Salary: 34,078 SDG
Estimated Weekly Salary: 7,864 SDG per week
Estimated Hourly Salary: 197 SDG per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 395,670 SDGEstimated Monthly Salary: 32,973 SDG
Estimated Weekly Salary: 7,609 SDG per week
Estimated Hourly Salary: 190 SDG per hour
Last revision of data: 2024-01-08Structural Metal Fabricator Fitter estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 627 USD
Estimated Monthly Salary: 52 USD
Estimated Weekly Salary: 12 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sudan is a country located in northeastern Africa. It has a diverse population comprising of approximately 43 million people. With an area of about 1.88 million square kilometers, Sudan is the third-largest country in Africa. It shares borders with several countries including Egypt, Ethiopia, and South Sudan.
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Structural Metal Fabricator Fitter job salary compared to average salary in Sudan.
Comparison shows that a person working as Structural Metal Fabricator Fitter in Sudan earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Structural Metal Fabricator Fitter job salary compared to average salary in Sudan.
Comparison shows that a person working as Structural Metal Fabricator Fitter in Sudan earns on average:
0.9 times the average salary (or 90% of average salary).
Is Structural Metal Fabricator Fitter a well paid job?
Yes, our data show that Structural Metal Fabricator Fitter is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Structural Metal Fabricator Fitter?
High salary for Structural Metal Fabricator Fitter would be somewhere between 449,826 SDG and 592,953 SDG. However this is an estimation based on Gaussian Distribution.How much can you save working as Structural Metal Fabricator Fitter in Sudan?
Living in Sudan the approximate monthly expenses are: 30 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 408,933 SDG
Estimated Monthly Salary: 34,078 SDG
Estimated Weekly Salary: 7,864 SDG per week
Estimated Hourly Salary: 197 SDG per hour
By working as Structural Metal Fabricator Fitter a person can save up to 22 USD per month or 262 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Egypt, Libya, Chad, Central African Republic, South Sudan, Ethiopia, Eritrea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Structural Metal Fabricator Fitter
Egypt is 3,370 USD
Ethiopia is 1,582 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Sudan
(5,202,743 SDG per year, pre-tax.)
2. Cardiologist
(4,312,384 SDG per year, pre-tax.)
(4,186,864 SDG per year, pre-tax.)
4. Neurosurgeon
(4,050,391 SDG per year, pre-tax.)
(4,037,932 SDG per year, pre-tax.)
(3,946,495 SDG per year, pre-tax.)
(3,944,580 SDG per year, pre-tax.)
8. Oncologist
(3,943,308 SDG per year, pre-tax.)
(3,940,001 SDG per year, pre-tax.)
(3,931,263 SDG per year, pre-tax.)
Data as of 2025Random salary:
Florist (238,056 SDG per year, pre-tax.)
Medical clinical specialist (624,767 SDG per year, pre-tax.)
Research analyst healthcare (601,080 SDG per year, pre-tax.)
Electronics designer (364,897 SDG per year, pre-tax.)
Data mining specialist (519,739 SDG per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=sudan&job=structural-metal-fabricator-fitter'><img src='https://optisalary.com/wp-content/graphs/salary/structural-metal-fabricator-fitter-salary-in-sudan-2025.jpg' alt='structural metal fabricator fitter salary in sudan 2025' title='structural metal fabricator fitter salary in sudan 2025' /></a>
Please note:optisalary.com presents salary data for reference purposes only.
The salary figures on this website are meant for reference purposes exclusively. We collect salary data from varied sources, but cannot guarantee absolute accuracy. Users must on their own verify salaries before making career commitments. Salary fluctuations occur due to company policies, negotiation skills, and experience levels. We deny any guarantee regarding the validity of the listed salary data. By accessing this site, you agree that salary data is not definitive.
Salary details presented on optisalary.com are intended for reference purposes only. Our data is sourced through multiple sources and may not always be up to date. Users should verify salary information through other means before making employment commitments. The figures shown here may fluctuate due to factors such as location, industry standards, and individual skill sets. We cannot warrant that the data displayed is error-free. By accessing optisalary.com, you accept that salary information is offered 'as is' and without assurances.