Home > Salary > Sudan > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 489,059 SDG
Estimated Monthly Salary: 40,755 SDG
Estimated Weekly Salary: 9,405 SDG per week
Estimated Hourly Salary: 235 SDG per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 39,295 SDG
Estimated Weekly Salary: 9,068 SDG per week
Estimated Hourly Salary: 227 SDG per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 746 USD
Estimated Monthly Salary: 62 USD
Estimated Weekly Salary: 14 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 489,059 SDG
Estimated Monthly Salary: 40,755 SDG
Estimated Weekly Salary: 9,405 SDG per week
Estimated Hourly Salary: 235 SDG per hour
By working as Metrology Calibration Technician a person can save up to 32 USD per month or 381 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Painter (348,960 SDG per year, pre-tax.)
Director high school (628,494 SDG per year, pre-tax.)
Mayor (536,280 SDG per year, pre-tax.)
Hr operations manager (707,793 SDG per year, pre-tax.)
Unit secretary emergency room (er) (275,988 SDG per year, pre-tax.)
Metrology Calibration Technician salary in Sudan
Average Yearly Salary of Metrology Calibration Technician in Sudan is approximately 489,059 SDG (746 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 489,059 SDG
Estimated Monthly Salary: 40,755 SDG
Estimated Weekly Salary: 9,405 SDG per week
Estimated Hourly Salary: 235 SDG per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 471,534 SDGEstimated Monthly Salary: 39,295 SDG
Estimated Weekly Salary: 9,068 SDG per week
Estimated Hourly Salary: 227 SDG per hour
Last revision of data: 2024-01-07Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 746 USD
Estimated Monthly Salary: 62 USD
Estimated Weekly Salary: 14 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sudan is a country located in northeastern Africa. It has a diverse population comprising of approximately 43 million people. With an area of about 1.88 million square kilometers, Sudan is the third-largest country in Africa. It shares borders with several countries including Egypt, Ethiopia, and South Sudan.
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Sudan.
Comparison shows that a person working as Metrology Calibration Technician in Sudan earns on average:
1.07 times the average salary (or 107% of average salary).
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Sudan.
Comparison shows that a person working as Metrology Calibration Technician in Sudan earns on average:
1.07 times the average salary (or 107% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 537,965 SDG and 709,136 SDG. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in Sudan?
Living in Sudan the approximate monthly expenses are: 30 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 489,059 SDG
Estimated Monthly Salary: 40,755 SDG
Estimated Weekly Salary: 9,405 SDG per week
Estimated Hourly Salary: 235 SDG per hour
By working as Metrology Calibration Technician a person can save up to 32 USD per month or 381 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Egypt, Libya, Chad, Central African Republic, South Sudan, Ethiopia, Eritrea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Egypt is 4,039 USD
Ethiopia is 1,891 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Sudan
(5,202,743 SDG per year, pre-tax.)
2. Cardiologist
(4,312,384 SDG per year, pre-tax.)
(4,186,864 SDG per year, pre-tax.)
4. Neurosurgeon
(4,050,391 SDG per year, pre-tax.)
(4,037,932 SDG per year, pre-tax.)
(3,946,495 SDG per year, pre-tax.)
(3,944,580 SDG per year, pre-tax.)
8. Oncologist
(3,943,308 SDG per year, pre-tax.)
(3,940,001 SDG per year, pre-tax.)
(3,931,263 SDG per year, pre-tax.)
Data as of 2025Random salary:
Painter (348,960 SDG per year, pre-tax.)
Director high school (628,494 SDG per year, pre-tax.)
Mayor (536,280 SDG per year, pre-tax.)
Hr operations manager (707,793 SDG per year, pre-tax.)
Unit secretary emergency room (er) (275,988 SDG per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=sudan&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-sudan-2025.jpg' alt='metrology calibration technician salary in sudan 2025' title='metrology calibration technician salary in sudan 2025' /></a>
Please note:optisalary.com aggregates salary data for reference purposes only.
This website aggregates salary data for informational use only. We attempt to provide reliable figures, but do not assure their validity. Users are encouraged to check alternative platforms before making financial decisions. Salary ranges may vary due to geographic location, experience, and industry trends. We assume no liability for inconsistencies in the salary information provided. Your continued use with this site confirms understanding of this policy.
By visiting optisalary.com, you accept that salary details are not definitive.