Home > Salary > Sudan > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 387,505 SDG
Estimated Monthly Salary: 32,292 SDG
Estimated Weekly Salary: 7,452 SDG per week
Estimated Hourly Salary: 186 SDG per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 31,174 SDG
Estimated Weekly Salary: 7,194 SDG per week
Estimated Hourly Salary: 180 SDG per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 591 USD
Estimated Monthly Salary: 49 USD
Estimated Weekly Salary: 11 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 387,505 SDG
Estimated Monthly Salary: 32,292 SDG
Estimated Weekly Salary: 7,452 SDG per week
Estimated Hourly Salary: 186 SDG per hour
By working as Mechanical Calibration Technician a person can save up to 19 USD per month or 226 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Designer kitchen bath (336,156 SDG per year, pre-tax.)
Facility service associate (245,536 SDG per year, pre-tax.)
Oil burner (409,176 SDG per year, pre-tax.)
Maintenance electrician (433,316 SDG per year, pre-tax.)
Antiques appraiser (530,714 SDG per year, pre-tax.)
Mechanical Calibration Technician salary in Sudan
Average Yearly Salary of Mechanical Calibration Technician in Sudan is approximately 387,505 SDG (591 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 387,505 SDG
Estimated Monthly Salary: 32,292 SDG
Estimated Weekly Salary: 7,452 SDG per week
Estimated Hourly Salary: 186 SDG per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 374,088 SDGEstimated Monthly Salary: 31,174 SDG
Estimated Weekly Salary: 7,194 SDG per week
Estimated Hourly Salary: 180 SDG per hour
Last revision of data: 2024-01-03Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 591 USD
Estimated Monthly Salary: 49 USD
Estimated Weekly Salary: 11 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sudan is a country located in northeastern Africa. It has a diverse population comprising of approximately 43 million people. With an area of about 1.88 million square kilometers, Sudan is the third-largest country in Africa. It shares borders with several countries including Egypt, Ethiopia, and South Sudan.
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Sudan.
Comparison shows that a person working as Mechanical Calibration Technician in Sudan earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Sudan.
Comparison shows that a person working as Mechanical Calibration Technician in Sudan earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 426,256 SDG and 561,882 SDG. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Sudan?
Living in Sudan the approximate monthly expenses are: 30 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 387,505 SDG
Estimated Monthly Salary: 32,292 SDG
Estimated Weekly Salary: 7,452 SDG per week
Estimated Hourly Salary: 186 SDG per hour
By working as Mechanical Calibration Technician a person can save up to 19 USD per month or 226 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Egypt, Libya, Chad, Central African Republic, South Sudan, Ethiopia, Eritrea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Egypt is 3,181 USD
Ethiopia is 1,491 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Sudan
(5,202,743 SDG per year, pre-tax.)
2. Cardiologist
(4,312,384 SDG per year, pre-tax.)
(4,186,864 SDG per year, pre-tax.)
4. Neurosurgeon
(4,050,391 SDG per year, pre-tax.)
(4,037,932 SDG per year, pre-tax.)
(3,946,495 SDG per year, pre-tax.)
(3,944,580 SDG per year, pre-tax.)
8. Oncologist
(3,943,308 SDG per year, pre-tax.)
(3,940,001 SDG per year, pre-tax.)
(3,931,263 SDG per year, pre-tax.)
Data as of 2025Random salary:
Designer kitchen bath (336,156 SDG per year, pre-tax.)
Facility service associate (245,536 SDG per year, pre-tax.)
Oil burner (409,176 SDG per year, pre-tax.)
Maintenance electrician (433,316 SDG per year, pre-tax.)
Antiques appraiser (530,714 SDG per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=sudan&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-sudan-2025.jpg' alt='mechanical calibration technician salary in sudan 2025' title='mechanical calibration technician salary in sudan 2025' /></a>
Please note:This website offers salary insights for informational purposes exclusively.
Salary data displayed on this site is for reference exclusively. Our figures are compiled various inputs, but we cannot guarantee their accuracy. Users should always verify salary details with additional platforms before making financial commitments. Salaries fluctuate due to economic trends, job location, and negotiation skills. We cannot offer any warranties about the completeness of the provided salary data. By continuing to use this site, you acknowledge these limitations.
This website presents salary insights for informational purposes exclusively. While we collect data from multiple providers, we do not guarantee absolute reliability. Users are encouraged to review external organizations before making major financial moves. Salaries fluctuate due to various elements, such as market demand, employer policies, and geographic location. We make no guarantee regarding the correctness of the displayed salary data. Your use of this site indicates your understanding of these terms.