Home > Salary > Sudan > Coil Winder Taper Or Finisher
A coil winder taper or finisher is responsible for operating machinery to wind wire coils used in electrical equipment such as transformers, motors, and generators. They work with precision and accuracy to ensure the coils are wound correctly and meet specifications. The coil winder taper or finisher may also be responsible for applying tape or insulation materials to the coils to protect them from damage or electrical interference. They must have a strong understanding of electrical principles and be able to interpret technical drawings and specifications. Attention to detail, manual dexterity, and the ability to work with small components are essential skills for this occupation. The coil winder taper or finisher may work in manufacturing facilities, electrical equipment repair shops, or in the automotive industry.
Estimated Yearly Salary: 347,600 SDG
Estimated Monthly Salary: 28,967 SDG
Estimated Weekly Salary: 6,685 SDG per week
Estimated Hourly Salary: 167 SDG per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 28,013 SDG
Estimated Weekly Salary: 6,465 SDG per week
Estimated Hourly Salary: 162 SDG per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 534 USD
Estimated Monthly Salary: 45 USD
Estimated Weekly Salary: 10 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 347,600 SDG
Estimated Monthly Salary: 28,967 SDG
Estimated Weekly Salary: 6,685 SDG per week
Estimated Hourly Salary: 167 SDG per hour
By working as Coil Winder Taper Or Finisher a person can save up to 14 USD per month or 169 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Estimated Yearly Salary for Coil Winder Taper Or Finisher
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Hr benefits manager (596,274 SDG per year, pre-tax.)
Purchasing manager (671,658 SDG per year, pre-tax.)
Community health worker (348,938 SDG per year, pre-tax.)
Registered nurse (rn), emergency room (533,542 SDG per year, pre-tax.)
Facilities maintenance engineer (308,251 SDG per year, pre-tax.)
Coil Winder Taper Or Finisher salary in Sudan
Average Yearly Salary of Coil Winder Taper Or Finisher in Sudan is approximately 347,600 SDG (534 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Coil Winder Taper Or Finisher do?
A coil winder taper or finisher is responsible for operating machinery to wind wire coils used in electrical equipment such as transformers, motors, and generators. They work with precision and accuracy to ensure the coils are wound correctly and meet specifications. The coil winder taper or finisher may also be responsible for applying tape or insulation materials to the coils to protect them from damage or electrical interference. They must have a strong understanding of electrical principles and be able to interpret technical drawings and specifications. Attention to detail, manual dexterity, and the ability to work with small components are essential skills for this occupation. The coil winder taper or finisher may work in manufacturing facilities, electrical equipment repair shops, or in the automotive industry.
Skills: Coil Winder, Taper, Finisher, Electrical Equipment, Precision, Insulation Materials
Job industry: Manufacturing
Job industry: Manufacturing
How much does Coil Winder Taper Or Finisher make?
Salary details
How much does Coil Winder Taper Or Finisher make?Estimated Yearly Salary: 347,600 SDG
Estimated Monthly Salary: 28,967 SDG
Estimated Weekly Salary: 6,685 SDG per week
Estimated Hourly Salary: 167 SDG per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 336,156 SDGEstimated Monthly Salary: 28,013 SDG
Estimated Weekly Salary: 6,465 SDG per week
Estimated Hourly Salary: 162 SDG per hour
Last revision of data: 2024-01-03Coil Winder Taper Or Finisher estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 534 USD
Estimated Monthly Salary: 45 USD
Estimated Weekly Salary: 10 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Sudan is a country located in northeastern Africa. It has a diverse population comprising of approximately 43 million people. With an area of about 1.88 million square kilometers, Sudan is the third-largest country in Africa. It shares borders with several countries including Egypt, Ethiopia, and South Sudan.
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Coil Winder Taper Or Finisher job salary compared to average salary in Sudan.
Comparison shows that a person working as Coil Winder Taper Or Finisher in Sudan earns on average:
0.76 times the average salary (or 76% of average salary).
Estimated national average yearly salary is 456,122 SDG (760 USD). Value indicated is pre-tax. Below graph shows estimated Coil Winder Taper Or Finisher job salary compared to average salary in Sudan.
Comparison shows that a person working as Coil Winder Taper Or Finisher in Sudan earns on average:
0.76 times the average salary (or 76% of average salary).
Is Coil Winder Taper Or Finisher a well paid job?
No, our data shows that Coil Winder Taper Or Finisher is typically not a well-paid job. The salary varies based on experience. Meaning that even though Coil Winder Taper Or Finisher might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Coil Winder Taper Or Finisher?
High salary for Coil Winder Taper Or Finisher would be somewhere between 382,360 SDG and 504,020 SDG. However this is an estimation based on Gaussian Distribution.How much can you save working as Coil Winder Taper Or Finisher in Sudan?
Living in Sudan the approximate monthly expenses are: 30 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 347,600 SDG
Estimated Monthly Salary: 28,967 SDG
Estimated Weekly Salary: 6,685 SDG per week
Estimated Hourly Salary: 167 SDG per hour
By working as Coil Winder Taper Or Finisher a person can save up to 14 USD per month or 169 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Sudan, see costs of living in Sudan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Egypt, Libya, Chad, Central African Republic, South Sudan, Ethiopia, Eritrea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Coil Winder Taper Or Finisher
Egypt is 2,871 USD
Ethiopia is 1,344 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Sudan
(5,202,743 SDG per year, pre-tax.)
2. Cardiologist
(4,312,384 SDG per year, pre-tax.)
(4,186,864 SDG per year, pre-tax.)
4. Neurosurgeon
(4,050,391 SDG per year, pre-tax.)
(4,037,932 SDG per year, pre-tax.)
(3,946,495 SDG per year, pre-tax.)
(3,944,580 SDG per year, pre-tax.)
8. Oncologist
(3,943,308 SDG per year, pre-tax.)
(3,940,001 SDG per year, pre-tax.)
(3,931,263 SDG per year, pre-tax.)
Data as of 2025Random salary:
Hr benefits manager (596,274 SDG per year, pre-tax.)
Purchasing manager (671,658 SDG per year, pre-tax.)
Community health worker (348,938 SDG per year, pre-tax.)
Registered nurse (rn), emergency room (533,542 SDG per year, pre-tax.)
Facilities maintenance engineer (308,251 SDG per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=sudan&job=coil-winder-taper-or-finisher'><img src='https://optisalary.com/wp-content/graphs/salary/coil-winder-taper-or-finisher-salary-in-sudan-2025.jpg' alt='coil winder taper or finisher salary in sudan 2025' title='coil winder taper or finisher salary in sudan 2025' /></a>
Please note:optisalary.com aggregates salary data for reference purposes exclusively.
optisalary.com offers salary insights for educational purposes only. While we collect data from multiple sources, we cannot ensure full reliability. Users are advised to review trusted platforms before making major financial moves. Salaries fluctuate due to various factors, such as market demand, employer policies, and geographic location. We cannot provide guarantee regarding the correctness of the displayed salary figures. Your continued access of this site confirms your understanding of these conditions.
Salary details displayed on this website are intended for reference use only. Our data is sourced through multiple inputs and may not always be accurate. Users should verify salary information independently before making employment decisions. The figures listed here may change due to factors such as location, industry standards, and individual skill sets. We do not guarantee that the information displayed is flawless. By accessing this website, you accept that salary information is offered 'as is' and without warranties.