Home > Salary > Slovakia > Cnc Brake Press Operator
A CNC brake press operator is responsible for operating and maintaining computer numerical control (CNC) machinery used in the metal fabrication industry. This occupation involves setting up and programming the CNC machine to accurately bend and shape metal components according to specific blueprints and design specifications. The operator must ensure the correct selection of tools, adjust machine settings, and monitor the production process to ensure precision and quality control. They are also responsible for inspecting finished products to ensure they meet the required standards and making any necessary adjustments.
Estimated Yearly Salary: 14,449 EUR
Estimated Monthly Salary: 1,204 EUR
Estimated Weekly Salary: 278 EUR per week
Estimated Hourly Salary: 7 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 1,162 EUR
Estimated Weekly Salary: 268 EUR per week
Estimated Hourly Salary: 7 EUR per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 14,385 USD
Estimated Monthly Salary: 1,199 USD
Estimated Weekly Salary: 277 USD per week
Estimated Hourly Salary: 7 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 14,449 EUR
Estimated Monthly Salary: 1,204 EUR
Estimated Weekly Salary: 278 EUR per week
Estimated Hourly Salary: 7 EUR per hour
By working as Cnc Brake Press Operator a person can save up to 316 USD per month or 3,796 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Slovakia, see costs of living in Slovakia.
Estimated Yearly Salary for Cnc Brake Press Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Knowledge management analyst (18,649 EUR per year, pre-tax.)
Snake milker (17,689 EUR per year, pre-tax.)
Industrial pharmacist (30,549 EUR per year, pre-tax.)
Games developer (36,951 EUR per year, pre-tax.)
Registered dietetic technician (12,462 EUR per year, pre-tax.)
Cnc Brake Press Operator salary in Slovakia
Average Yearly Salary of Cnc Brake Press Operator in Slovakia is approximately 14,449 EUR (14,385 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Brake Press Operator do?
A CNC brake press operator is responsible for operating and maintaining computer numerical control (CNC) machinery used in the metal fabrication industry. This occupation involves setting up and programming the CNC machine to accurately bend and shape metal components according to specific blueprints and design specifications. The operator must ensure the correct selection of tools, adjust machine settings, and monitor the production process to ensure precision and quality control. They are also responsible for inspecting finished products to ensure they meet the required standards and making any necessary adjustments.
Skills: CNC brake press operator, metal fabrication, CNC machinery, precision bending, quality control, machine programming
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Brake Press Operator make?
Salary details
How much does Cnc Brake Press Operator make?Estimated Yearly Salary: 14,449 EUR
Estimated Monthly Salary: 1,204 EUR
Estimated Weekly Salary: 278 EUR per week
Estimated Hourly Salary: 7 EUR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 13,946 EUREstimated Monthly Salary: 1,162 EUR
Estimated Weekly Salary: 268 EUR per week
Estimated Hourly Salary: 7 EUR per hour
Last revision of data: 2024-01-02Cnc Brake Press Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 14,385 USD
Estimated Monthly Salary: 1,199 USD
Estimated Weekly Salary: 277 USD per week
Estimated Hourly Salary: 7 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Slovakia is a landlocked country located in Central Europe. It has a population of approximately 5.5 million people and covers an area of around 49,000 square kilometers. The capital city is Bratislava.
Estimated national average yearly salary is 20,101 EUR (22,060 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Brake Press Operator job salary compared to average salary in Slovakia.
Comparison shows that a person working as Cnc Brake Press Operator in Slovakia earns on average:
0.72 times the average salary (or 72% of average salary).
Estimated national average yearly salary is 20,101 EUR (22,060 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Brake Press Operator job salary compared to average salary in Slovakia.
Comparison shows that a person working as Cnc Brake Press Operator in Slovakia earns on average:
0.72 times the average salary (or 72% of average salary).
Is Cnc Brake Press Operator a well paid job?
No, our data shows that Cnc Brake Press Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Cnc Brake Press Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Cnc Brake Press Operator?
High salary for Cnc Brake Press Operator would be somewhere between 15,894 EUR and 20,951 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Brake Press Operator in Slovakia?
Living in Slovakia the approximate monthly expenses are: 882 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 14,449 EUR
Estimated Monthly Salary: 1,204 EUR
Estimated Weekly Salary: 278 EUR per week
Estimated Hourly Salary: 7 EUR per hour
By working as Cnc Brake Press Operator a person can save up to 316 USD per month or 3,796 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Slovakia, see costs of living in Slovakia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Austria, Czech Republic, Hungary, Poland, Ukraine. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Brake Press Operator
Austria is 36,646 USD
Czech Republic is 17,399 USD
Hungary is 12,416 USD
Poland is 11,987 USD
Ukraine is 2,802 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Slovakia
(229,723 EUR per year, pre-tax.)
2. Cardiologist
(191,172 EUR per year, pre-tax.)
(185,663 EUR per year, pre-tax.)
4. Neurosurgeon
(178,960 EUR per year, pre-tax.)
(178,510 EUR per year, pre-tax.)
6. Oncologist
(175,363 EUR per year, pre-tax.)
(175,110 EUR per year, pre-tax.)
(175,069 EUR per year, pre-tax.)
9. Urologist
(174,851 EUR per year, pre-tax.)
10. Plastic surgeon
(174,812 EUR per year, pre-tax.)
Data as of 2025Random salary:
Knowledge management analyst (18,649 EUR per year, pre-tax.)
Snake milker (17,689 EUR per year, pre-tax.)
Industrial pharmacist (30,549 EUR per year, pre-tax.)
Games developer (36,951 EUR per year, pre-tax.)
Registered dietetic technician (12,462 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=slovakia&job=cnc-brake-press-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-brake-press-operator-salary-in-slovakia-2025.jpg' alt='cnc brake press operator salary in slovakia 2025' title='cnc brake press operator salary in slovakia 2025' /></a>
Please note:This website aggregates salary data for reference purposes exclusively.
Salary details displayed on optisalary.com are intended for reference purposes only. Our data is sourced through multiple sources and may not necessarily be accurate. Users should cross-reference salary information through other means before making financial commitments. The figures listed here may change due to variables such as location, industry standards, and individual skill sets. We do not guarantee that the information provided is error-free. By using optisalary.com, you accept that salary information is offered 'as is' and without assurances.
The salary figures presented here are meant for reference purposes solely. While we strive to ensure correctness, we cannot guarantee all figures is precise. Users are advised to research salary details with independent authorities before making critical financial choices. Salary amounts may change due to negotiation, industry trends, and location. We deny responsibility for errors in the salary data displayed.