Home > Salary > Russia > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 1,309,064 RUB
Estimated Monthly Salary: 109,089 RUB
Estimated Weekly Salary: 25,174 RUB per week
Estimated Hourly Salary: 629 RUB per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 105,447 RUB
Estimated Weekly Salary: 24,334 RUB per week
Estimated Hourly Salary: 608 RUB per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 12,594 USD
Estimated Monthly Salary: 1,050 USD
Estimated Weekly Salary: 242 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,309,064 RUB
Estimated Monthly Salary: 109,089 RUB
Estimated Weekly Salary: 25,174 RUB per week
Estimated Hourly Salary: 629 RUB per hour
By working as Metrology Calibration Technician a person can save up to 536 USD per month or 6,436 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Java designer (1,163,466 RUB per year, pre-tax.)
3d printer technician (1,263,749 RUB per year, pre-tax.)
Structural engineer roads and bridges (1,616,711 RUB per year, pre-tax.)
Certified physician's coder (1,200,459 RUB per year, pre-tax.)
General ledger accounting manager (1,616,711 RUB per year, pre-tax.)
Metrology Calibration Technician salary in Russia
Average Yearly Salary of Metrology Calibration Technician in Russia is approximately 1,309,064 RUB (12,594 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 1,309,064 RUB
Estimated Monthly Salary: 109,089 RUB
Estimated Weekly Salary: 25,174 RUB per week
Estimated Hourly Salary: 629 RUB per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,265,368 RUBEstimated Monthly Salary: 105,447 RUB
Estimated Weekly Salary: 24,334 RUB per week
Estimated Hourly Salary: 608 RUB per hour
Last revision of data: 2024-01-06Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 12,594 USD
Estimated Monthly Salary: 1,050 USD
Estimated Weekly Salary: 242 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Russia, officially known as the Russian Federation, is the largest country in the world by land area. It spans across Eastern Europe and Northern Asia, covering approximately 17.1 million square kilometers. With a population of over 145 million people, Russia is the ninth most populous country globally. Its capital city is Moscow, which is also the most populous city in the country.
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Russia.
Comparison shows that a person working as Metrology Calibration Technician in Russia earns on average:
1.07 times the average salary (or 107% of average salary).
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Russia.
Comparison shows that a person working as Metrology Calibration Technician in Russia earns on average:
1.07 times the average salary (or 107% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 1,439,970 RUB and 1,898,143 RUB. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in Russia?
Living in Russia the approximate monthly expenses are: 513 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,309,064 RUB
Estimated Monthly Salary: 109,089 RUB
Estimated Weekly Salary: 25,174 RUB per week
Estimated Hourly Salary: 629 RUB per hour
By working as Metrology Calibration Technician a person can save up to 536 USD per month or 6,436 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Estonia, Latvia, Lithuania, Poland, Belarus, Ukraine, Georgia, Azerbaijan, Kazakhstan, China, Mongolia, North Korea.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Norway is 93,569 USD
Finland is 53,324 USD
Estonia is 27,118 USD
Latvia is 21,071 USD
Lithuania is 23,191 USD
Poland is 17,989 USD
Ukraine is 4,189 USD
China is 12,630 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Russia
(13,934,809 RUB per year, pre-tax.)
2. Cardiologist
(11,631,510 RUB per year, pre-tax.)
(11,174,546 RUB per year, pre-tax.)
(10,855,821 RUB per year, pre-tax.)
5. Neurosurgeon
(10,830,980 RUB per year, pre-tax.)
6. Oncologist
(10,599,260 RUB per year, pre-tax.)
(10,583,170 RUB per year, pre-tax.)
(10,579,813 RUB per year, pre-tax.)
(10,569,788 RUB per year, pre-tax.)
10. Plastic surgeon
(10,551,739 RUB per year, pre-tax.)
Data as of 2025Random salary:
Java designer (1,163,466 RUB per year, pre-tax.)
3d printer technician (1,263,749 RUB per year, pre-tax.)
Structural engineer roads and bridges (1,616,711 RUB per year, pre-tax.)
Certified physician's coder (1,200,459 RUB per year, pre-tax.)
General ledger accounting manager (1,616,711 RUB per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=russia&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-russia-2025.jpg' alt='metrology calibration technician salary in russia 2025' title='metrology calibration technician salary in russia 2025' /></a>
Please note:The salary figures on optisalary.com are meant for informational purposes exclusively.
The salary estimates on optisalary.com are meant for reference purposes only. We collect salary data from varied sources, but cannot ensure absolute accuracy. Users should on their own verify salaries before making financial commitments. Salary variations occur due to industry standards, demand shifts, and location. We deny any warranty regarding the validity of the provided salary data. By using this site, you acknowledge that salary data is not definitive.
optisalary.com aggregates salary data for reference use exclusively. While we strive to present accurate figures, we do not warrant their full reliability. Users are strongly advised to consult other databases before making career-related plans. Salary figures vary based on several factors, such as industry trends, negotiation power, and regional demand. We do not offer any guarantees as to the correctness of the provided data. Your access of this site acknowledges agreement of this notice.