Home > Salary > Russia > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 1,681,082 RUB
Estimated Monthly Salary: 140,090 RUB
Estimated Weekly Salary: 32,329 RUB per week
Estimated Hourly Salary: 808 RUB per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 135,746 RUB
Estimated Weekly Salary: 31,326 RUB per week
Estimated Hourly Salary: 783 RUB per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 16,182 USD
Estimated Monthly Salary: 1,349 USD
Estimated Weekly Salary: 311 USD per week
Estimated Hourly Salary: 8 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,681,082 RUB
Estimated Monthly Salary: 140,090 RUB
Estimated Weekly Salary: 32,329 RUB per week
Estimated Hourly Salary: 808 RUB per hour
By working as Injection Molding Engineer a person can save up to 835 USD per month or 10,024 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Wholesale title clerk autotruck (830,373 RUB per year, pre-tax.)
Drilling rig manager (3,138,145 RUB per year, pre-tax.)
Laboratory clerk (706,197 RUB per year, pre-tax.)
Insurance claims examiner (1,322,694 RUB per year, pre-tax.)
Creative services manager (1,788,904 RUB per year, pre-tax.)
Injection Molding Engineer salary in Russia
Average Yearly Salary of Injection Molding Engineer in Russia is approximately 1,681,082 RUB (16,182 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 1,681,082 RUB
Estimated Monthly Salary: 140,090 RUB
Estimated Weekly Salary: 32,329 RUB per week
Estimated Hourly Salary: 808 RUB per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,628,952 RUBEstimated Monthly Salary: 135,746 RUB
Estimated Weekly Salary: 31,326 RUB per week
Estimated Hourly Salary: 783 RUB per hour
Last revision of data: 2024-01-08Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 16,182 USD
Estimated Monthly Salary: 1,349 USD
Estimated Weekly Salary: 311 USD per week
Estimated Hourly Salary: 8 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Russia, officially known as the Russian Federation, is the largest country in the world by land area. It spans across Eastern Europe and Northern Asia, covering approximately 17.1 million square kilometers. With a population of over 145 million people, Russia is the ninth most populous country globally. Its capital city is Moscow, which is also the most populous city in the country.
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Russia.
Comparison shows that a person working as Injection Molding Engineer in Russia earns on average:
1.37 times the average salary (or 137% of average salary).
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Russia.
Comparison shows that a person working as Injection Molding Engineer in Russia earns on average:
1.37 times the average salary (or 137% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 1,849,190 RUB and 2,437,569 RUB. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Russia?
Living in Russia the approximate monthly expenses are: 513 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,681,082 RUB
Estimated Monthly Salary: 140,090 RUB
Estimated Weekly Salary: 32,329 RUB per week
Estimated Hourly Salary: 808 RUB per hour
By working as Injection Molding Engineer a person can save up to 835 USD per month or 10,024 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Estonia, Latvia, Lithuania, Poland, Belarus, Ukraine, Georgia, Azerbaijan, Kazakhstan, China, Mongolia, North Korea.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Norway is 120,238 USD
Finland is 68,531 USD
Estonia is 35,015 USD
Latvia is 27,227 USD
Lithuania is 29,833 USD
Poland is 23,186 USD
Ukraine is 5,388 USD
China is 16,174 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Russia
(13,934,809 RUB per year, pre-tax.)
2. Cardiologist
(11,631,510 RUB per year, pre-tax.)
(11,174,546 RUB per year, pre-tax.)
(10,855,821 RUB per year, pre-tax.)
5. Neurosurgeon
(10,830,980 RUB per year, pre-tax.)
6. Oncologist
(10,599,260 RUB per year, pre-tax.)
(10,583,170 RUB per year, pre-tax.)
(10,579,813 RUB per year, pre-tax.)
(10,569,788 RUB per year, pre-tax.)
10. Plastic surgeon
(10,551,739 RUB per year, pre-tax.)
Data as of 2025Random salary:
Wholesale title clerk autotruck (830,373 RUB per year, pre-tax.)
Drilling rig manager (3,138,145 RUB per year, pre-tax.)
Laboratory clerk (706,197 RUB per year, pre-tax.)
Insurance claims examiner (1,322,694 RUB per year, pre-tax.)
Creative services manager (1,788,904 RUB per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=russia&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-russia-2025.jpg' alt='injection molding engineer salary in russia 2025' title='injection molding engineer salary in russia 2025' /></a>
Please note:This website presents salary data for reference use exclusively.
All salary data on optisalary.com are for informational use exclusively. We gather data from various reliable databases, yet do not ensure complete precision. Before making career decisions, visitors should cross-check with external verified sources. Salaries fluctuate due to several influences, including negotiation skills, industry demand, and experience levels. We disclaim any responsibility for misrepresentations in the salary information provided here. Your use with optisalary.com indicates agreement of this policy.
The salary estimates on optisalary.com are meant for reference purposes exclusively. We compile salary data from multiple providers, but do not guarantee absolute precision. Users should on their own confirm salaries before making career commitments. Salary fluctuations occur due to company policies, negotiation skills, and experience levels. We disclaim any warranty regarding the correctness of the listed salary data. By accessing this site, you acknowledge that salary data is not definitive.