Home > Salary > Russia > Engine Lathe Setup Operator
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Estimated Yearly Salary: 1,097,290 RUB
Estimated Monthly Salary: 91,441 RUB
Estimated Weekly Salary: 21,102 RUB per week
Estimated Hourly Salary: 528 RUB per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 88,478 RUB
Estimated Weekly Salary: 20,418 RUB per week
Estimated Hourly Salary: 510 RUB per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 10,601 USD
Estimated Monthly Salary: 883 USD
Estimated Weekly Salary: 204 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,097,290 RUB
Estimated Monthly Salary: 91,441 RUB
Estimated Weekly Salary: 21,102 RUB per week
Estimated Hourly Salary: 528 RUB per hour
By working as Engine Lathe Setup Operator a person can save up to 370 USD per month or 4,443 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Estimated Yearly Salary for Engine Lathe Setup Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Import manager (1,818,629 RUB per year, pre-tax.)
Ski instructor (799,968 RUB per year, pre-tax.)
Marketing operations manager (2,152,488 RUB per year, pre-tax.)
Computer aided design (cad), manager (1,847,144 RUB per year, pre-tax.)
Casting engineer (1,157,936 RUB per year, pre-tax.)
Engine Lathe Setup Operator salary in Russia
Average Yearly Salary of Engine Lathe Setup Operator in Russia is approximately 1,097,290 RUB (10,601 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Engine Lathe Setup Operator do?
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Skills: Engine lathe setup operator, Machining, Metalworking, Precision, Manufacturing, Mechanical engineering.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Engine Lathe Setup Operator make?
Salary details
How much does Engine Lathe Setup Operator make?Estimated Yearly Salary: 1,097,290 RUB
Estimated Monthly Salary: 91,441 RUB
Estimated Weekly Salary: 21,102 RUB per week
Estimated Hourly Salary: 528 RUB per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,061,736 RUBEstimated Monthly Salary: 88,478 RUB
Estimated Weekly Salary: 20,418 RUB per week
Estimated Hourly Salary: 510 RUB per hour
Last revision of data: 2024-01-03Engine Lathe Setup Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 10,601 USD
Estimated Monthly Salary: 883 USD
Estimated Weekly Salary: 204 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Russia, officially known as the Russian Federation, is the largest country in the world by land area. It spans across Eastern Europe and Northern Asia, covering approximately 17.1 million square kilometers. With a population of over 145 million people, Russia is the ninth most populous country globally. Its capital city is Moscow, which is also the most populous city in the country.
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Russia.
Comparison shows that a person working as Engine Lathe Setup Operator in Russia earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Russia.
Comparison shows that a person working as Engine Lathe Setup Operator in Russia earns on average:
0.9 times the average salary (or 90% of average salary).
Is Engine Lathe Setup Operator a well paid job?
Yes, our data show that Engine Lathe Setup Operator is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Engine Lathe Setup Operator?
High salary for Engine Lathe Setup Operator would be somewhere between 1,207,019 RUB and 1,591,071 RUB. However this is an estimation based on Gaussian Distribution.How much can you save working as Engine Lathe Setup Operator in Russia?
Living in Russia the approximate monthly expenses are: 513 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,097,290 RUB
Estimated Monthly Salary: 91,441 RUB
Estimated Weekly Salary: 21,102 RUB per week
Estimated Hourly Salary: 528 RUB per hour
By working as Engine Lathe Setup Operator a person can save up to 370 USD per month or 4,443 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Estonia, Latvia, Lithuania, Poland, Belarus, Ukraine, Georgia, Azerbaijan, Kazakhstan, China, Mongolia, North Korea.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Engine Lathe Setup Operator
Norway is 78,468 USD
Finland is 44,607 USD
Estonia is 22,841 USD
Latvia is 17,692 USD
Lithuania is 19,475 USD
Poland is 15,086 USD
Ukraine is 3,528 USD
China is 10,579 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Russia
(13,934,809 RUB per year, pre-tax.)
2. Cardiologist
(11,631,510 RUB per year, pre-tax.)
(11,174,546 RUB per year, pre-tax.)
(10,855,821 RUB per year, pre-tax.)
5. Neurosurgeon
(10,830,980 RUB per year, pre-tax.)
6. Oncologist
(10,599,260 RUB per year, pre-tax.)
(10,583,170 RUB per year, pre-tax.)
(10,579,813 RUB per year, pre-tax.)
(10,569,788 RUB per year, pre-tax.)
10. Plastic surgeon
(10,551,739 RUB per year, pre-tax.)
Data as of 2025Random salary:
Import manager (1,818,629 RUB per year, pre-tax.)
Ski instructor (799,968 RUB per year, pre-tax.)
Marketing operations manager (2,152,488 RUB per year, pre-tax.)
Computer aided design (cad), manager (1,847,144 RUB per year, pre-tax.)
Casting engineer (1,157,936 RUB per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=russia&job=engine-lathe-setup-operator'><img src='https://optisalary.com/wp-content/graphs/salary/engine-lathe-setup-operator-salary-in-russia-2025.jpg' alt='engine lathe setup operator salary in russia 2025' title='engine lathe setup operator salary in russia 2025' /></a>
Please note:The salary estimates on optisalary.com are meant for informational purposes exclusively.
The salary data presented here are meant for informational purposes solely. While we attempt to ensure correctness, we cannot guarantee all figures is flawless. Users should to research salary details with independent sources before making important financial decisions. Salary ranges may fluctuate due to economic shifts, demand variations, and regional factors. We deny responsibility for errors in the salary data displayed.
optisalary.com compiles salary data for educational purposes only. While we endeavor to present accurate estimates, we do not warrant their absolute reliability. Users are highly advised to consult other sources before finalizing career-related plans. Salary amounts fluctuate based on multiple conditions, such as industry trends, negotiation power, and regional demand. We do not offer any guarantees as to the validity of the listed information. Your access of this site indicates agreement of this disclaimer.