Home > Salary > Russia > Cnc Lathe Operator
A CNC lathe operator is responsible for operating and maintaining computer numerical control (CNC) machines used in the manufacturing industry. Their primary role is to set up the machine, load raw materials, and program the CNC lathe to perform precise cutting, shaping, and drilling operations on the workpiece. They monitor machine performance, make adjustments as necessary, and inspect finished products to ensure they meet quality standards.
The CNC lathe operator must have a strong understanding of blueprints, technical drawings, and specifications to accurately interpret and execute machining instructions. They should possess good problem-solving skills to troubleshoot any issues that may arise during the production process. Attention to detail and precision are crucial in this occupation to maintain product integrity and minimize errors.
Estimated Yearly Salary: 828,616 RUB
Estimated Monthly Salary: 69,051 RUB
Estimated Weekly Salary: 15,935 RUB per week
Estimated Hourly Salary: 398 RUB per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 66,664 RUB
Estimated Weekly Salary: 15,384 RUB per week
Estimated Hourly Salary: 385 RUB per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 7,986 USD
Estimated Monthly Salary: 666 USD
Estimated Weekly Salary: 154 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 828,616 RUB
Estimated Monthly Salary: 69,051 RUB
Estimated Weekly Salary: 15,935 RUB per week
Estimated Hourly Salary: 398 RUB per hour
By working as Cnc Lathe Operator a person can save up to 152 USD per month or 1,828 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Estimated Yearly Salary for Cnc Lathe Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Business consultant (1,653,367 RUB per year, pre-tax.)
Managed care manager (1,924,442 RUB per year, pre-tax.)
Dental claims processor (670,992 RUB per year, pre-tax.)
Licensed professional engineer (1,984,136 RUB per year, pre-tax.)
Banking supervisor check processing (1,189,520 RUB per year, pre-tax.)
Cnc Lathe Operator salary in Russia
Average Yearly Salary of Cnc Lathe Operator in Russia is approximately 828,616 RUB (7,986 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Lathe Operator do?
A CNC lathe operator is responsible for operating and maintaining computer numerical control (CNC) machines used in the manufacturing industry. Their primary role is to set up the machine, load raw materials, and program the CNC lathe to perform precise cutting, shaping, and drilling operations on the workpiece. They monitor machine performance, make adjustments as necessary, and inspect finished products to ensure they meet quality standards.
The CNC lathe operator must have a strong understanding of blueprints, technical drawings, and specifications to accurately interpret and execute machining instructions. They should possess good problem-solving skills to troubleshoot any issues that may arise during the production process. Attention to detail and precision are crucial in this occupation to maintain product integrity and minimize errors.
Skills: CNC lathe operator, CNC machine, manufacturing industry, machining operations, quality control, technical drawings
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Lathe Operator make?
Salary details
How much does Cnc Lathe Operator make?Estimated Yearly Salary: 828,616 RUB
Estimated Monthly Salary: 69,051 RUB
Estimated Weekly Salary: 15,935 RUB per week
Estimated Hourly Salary: 398 RUB per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 799,968 RUBEstimated Monthly Salary: 66,664 RUB
Estimated Weekly Salary: 15,384 RUB per week
Estimated Hourly Salary: 385 RUB per hour
Last revision of data: 2024-01-02Cnc Lathe Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 7,986 USD
Estimated Monthly Salary: 666 USD
Estimated Weekly Salary: 154 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Russia, officially known as the Russian Federation, is the largest country in the world by land area. It spans across Eastern Europe and Northern Asia, covering approximately 17.1 million square kilometers. With a population of over 145 million people, Russia is the ninth most populous country globally. Its capital city is Moscow, which is also the most populous city in the country.
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Lathe Operator job salary compared to average salary in Russia.
Comparison shows that a person working as Cnc Lathe Operator in Russia earns on average:
0.68 times the average salary (or 68% of average salary).
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Lathe Operator job salary compared to average salary in Russia.
Comparison shows that a person working as Cnc Lathe Operator in Russia earns on average:
0.68 times the average salary (or 68% of average salary).
Is Cnc Lathe Operator a well paid job?
No, our data shows that Cnc Lathe Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Cnc Lathe Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Cnc Lathe Operator?
High salary for Cnc Lathe Operator would be somewhere between 911,478 RUB and 1,201,493 RUB. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Lathe Operator in Russia?
Living in Russia the approximate monthly expenses are: 513 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 828,616 RUB
Estimated Monthly Salary: 69,051 RUB
Estimated Weekly Salary: 15,935 RUB per week
Estimated Hourly Salary: 398 RUB per hour
By working as Cnc Lathe Operator a person can save up to 152 USD per month or 1,828 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Estonia, Latvia, Lithuania, Poland, Belarus, Ukraine, Georgia, Azerbaijan, Kazakhstan, China, Mongolia, North Korea.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Lathe Operator
Norway is 59,078 USD
Finland is 33,855 USD
Estonia is 17,207 USD
Latvia is 13,329 USD
Lithuania is 14,687 USD
Poland is 11,382 USD
Ukraine is 2,650 USD
China is 7,949 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Russia
(13,934,809 RUB per year, pre-tax.)
2. Cardiologist
(11,631,510 RUB per year, pre-tax.)
(11,174,546 RUB per year, pre-tax.)
(10,855,821 RUB per year, pre-tax.)
5. Neurosurgeon
(10,830,980 RUB per year, pre-tax.)
6. Oncologist
(10,599,260 RUB per year, pre-tax.)
(10,583,170 RUB per year, pre-tax.)
(10,579,813 RUB per year, pre-tax.)
(10,569,788 RUB per year, pre-tax.)
10. Plastic surgeon
(10,551,739 RUB per year, pre-tax.)
Data as of 2025Random salary:
Business consultant (1,653,367 RUB per year, pre-tax.)
Managed care manager (1,924,442 RUB per year, pre-tax.)
Dental claims processor (670,992 RUB per year, pre-tax.)
Licensed professional engineer (1,984,136 RUB per year, pre-tax.)
Banking supervisor check processing (1,189,520 RUB per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=russia&job=cnc-lathe-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-lathe-operator-salary-in-russia-2025.jpg' alt='cnc lathe operator salary in russia 2025' title='cnc lathe operator salary in russia 2025' /></a>
Please note:The salary figures on this website are meant for reference use exclusively.
All salary data on this website are for informational use only. We compile data from various reliable sources, yet cannot guarantee complete accuracy. Before making career choices, visitors should consult additional verified sources. Salaries fluctuate due to various factors, including economic conditions, job market trends, and geographic location. We deny any responsibility for misrepresentations in the salary estimates provided here. Your use with this website indicates agreement of this policy.
The salary figures presented here are meant for informational purposes only. While we attempt to ensure accuracy, we do not guarantee every estimate is flawless. Users should to confirm salary details with official sources before making important career decisions. Salary amounts can change due to economic shifts, demand variations, and regional factors. We disclaim responsibility for inaccuracies in the compensation data displayed.