Home > Salary > Russia > 3d Printer Technician
A 3D printer technician is responsible for the maintenance, troubleshooting, and repair of 3D printers. They possess a deep understanding of the technology and are skilled in operating various types of 3D printers. Their primary role is to ensure that the printers are functioning optimally, producing high-quality prints, and meeting the desired specifications.
A 3D printer technician performs regular inspections and preventative maintenance on the printers, identifies any issues or malfunctions, and carries out necessary repairs or replacements. They also calibrate the machines, adjust settings, and update software as needed. Additionally, they may provide technical support and guidance to users, assisting them with design files, material selection, and print settings.
Estimated Yearly Salary: 1,263,749 RUB
Estimated Monthly Salary: 105,312 RUB
Estimated Weekly Salary: 24,303 RUB per week
Estimated Hourly Salary: 608 RUB per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 101,807 RUB
Estimated Weekly Salary: 23,494 RUB per week
Estimated Hourly Salary: 587 RUB per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 12,181 USD
Estimated Monthly Salary: 1,015 USD
Estimated Weekly Salary: 234 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,263,749 RUB
Estimated Monthly Salary: 105,312 RUB
Estimated Weekly Salary: 24,303 RUB per week
Estimated Hourly Salary: 608 RUB per hour
By working as 3d Printer Technician a person can save up to 502 USD per month or 6,023 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Estimated Yearly Salary for 3d Printer Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Division manager public works (1,612,489 RUB per year, pre-tax.)
Gen. manager (1,125,461 RUB per year, pre-tax.)
Facility operator (1,065,525 RUB per year, pre-tax.)
Burglar alarm installer (670,992 RUB per year, pre-tax.)
Data center manager (2,143,268 RUB per year, pre-tax.)
3d Printer Technician salary in Russia
Average Yearly Salary of 3d Printer Technician in Russia is approximately 1,263,749 RUB (12,181 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does 3d Printer Technician do?
A 3D printer technician is responsible for the maintenance, troubleshooting, and repair of 3D printers. They possess a deep understanding of the technology and are skilled in operating various types of 3D printers. Their primary role is to ensure that the printers are functioning optimally, producing high-quality prints, and meeting the desired specifications.
A 3D printer technician performs regular inspections and preventative maintenance on the printers, identifies any issues or malfunctions, and carries out necessary repairs or replacements. They also calibrate the machines, adjust settings, and update software as needed. Additionally, they may provide technical support and guidance to users, assisting them with design files, material selection, and print settings.
Skills: 3D printing, Printer maintenance, Troubleshooting, Repair, Calibration, Technical support.
Job industry: Manufacturing
Job industry: Manufacturing
How much does 3d Printer Technician make?
Salary details
How much does 3d Printer Technician make?Estimated Yearly Salary: 1,263,749 RUB
Estimated Monthly Salary: 105,312 RUB
Estimated Weekly Salary: 24,303 RUB per week
Estimated Hourly Salary: 608 RUB per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,221,688 RUBEstimated Monthly Salary: 101,807 RUB
Estimated Weekly Salary: 23,494 RUB per week
Estimated Hourly Salary: 587 RUB per hour
Last revision of data: 2024-01-033d Printer Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 12,181 USD
Estimated Monthly Salary: 1,015 USD
Estimated Weekly Salary: 234 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Russia, officially known as the Russian Federation, is the largest country in the world by land area. It spans across Eastern Europe and Northern Asia, covering approximately 17.1 million square kilometers. With a population of over 145 million people, Russia is the ninth most populous country globally. Its capital city is Moscow, which is also the most populous city in the country.
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated 3d Printer Technician job salary compared to average salary in Russia.
Comparison shows that a person working as 3d Printer Technician in Russia earns on average:
1.03 times the average salary (or 103% of average salary).
Estimated national average yearly salary is 1,224,752 RUB (12,830 USD). Value indicated is pre-tax. Below graph shows estimated 3d Printer Technician job salary compared to average salary in Russia.
Comparison shows that a person working as 3d Printer Technician in Russia earns on average:
1.03 times the average salary (or 103% of average salary).
Is 3d Printer Technician a well paid job?
Yes, our data show that 3d Printer Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for 3d Printer Technician?
High salary for 3d Printer Technician would be somewhere between 1,390,124 RUB and 1,832,436 RUB. However this is an estimation based on Gaussian Distribution.How much can you save working as 3d Printer Technician in Russia?
Living in Russia the approximate monthly expenses are: 513 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,263,749 RUB
Estimated Monthly Salary: 105,312 RUB
Estimated Weekly Salary: 24,303 RUB per week
Estimated Hourly Salary: 608 RUB per hour
By working as 3d Printer Technician a person can save up to 502 USD per month or 6,023 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Russia, see costs of living in Russia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Norway, Finland, Estonia, Latvia, Lithuania, Poland, Belarus, Ukraine, Georgia, Azerbaijan, Kazakhstan, China, Mongolia, North Korea.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for 3d Printer Technician
Norway is 90,782 USD
Finland is 51,651 USD
Estonia is 26,137 USD
Latvia is 20,302 USD
Lithuania is 22,512 USD
Poland is 17,426 USD
Ukraine is 4,039 USD
China is 12,218 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Russia
(13,934,809 RUB per year, pre-tax.)
2. Cardiologist
(11,631,510 RUB per year, pre-tax.)
(11,174,546 RUB per year, pre-tax.)
(10,855,821 RUB per year, pre-tax.)
5. Neurosurgeon
(10,830,980 RUB per year, pre-tax.)
6. Oncologist
(10,599,260 RUB per year, pre-tax.)
(10,583,170 RUB per year, pre-tax.)
(10,579,813 RUB per year, pre-tax.)
(10,569,788 RUB per year, pre-tax.)
10. Plastic surgeon
(10,551,739 RUB per year, pre-tax.)
Data as of 2025Random salary:
Division manager public works (1,612,489 RUB per year, pre-tax.)
Gen. manager (1,125,461 RUB per year, pre-tax.)
Facility operator (1,065,525 RUB per year, pre-tax.)
Burglar alarm installer (670,992 RUB per year, pre-tax.)
Data center manager (2,143,268 RUB per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=russia&job=3d-printer-technician'><img src='https://optisalary.com/wp-content/graphs/salary/3d-printer-technician-salary-in-russia-2025.jpg' alt='3d printer technician salary in russia 2025' title='3d printer technician salary in russia 2025' /></a>
Please note:Salary information displayed on this site is informational exclusively.
By visiting this website, you acknowledge that salary details are subject to change.
This website compiles salary data for reference use only. While we strive to deliver correct figures, we do not warrant their full reliability. Users are highly advised to check with other databases before making career-related plans. Salary amounts vary based on several factors, such as location, job role, and individual qualifications. We do not offer any claims as to the correctness of the provided information. Your access of this site indicates acceptance of this notice.