Home > Salary > Qatar > Cutter Operator
A cutter operator is responsible for operating cutting machinery to cut materials such as fabric, paper, or metal into specific shapes and sizes. They work in various industries such as manufacturing, printing, textiles, and construction. The primary duties of a cutter operator include setting up and adjusting cutting machines, ensuring the correct measurements and specifications are met, loading materials onto the machine, monitoring the cutting process, and performing routine maintenance on the equipment.
This occupation requires strong attention to detail, technical skills, and the ability to interpret blueprints or design specifications. Cutter operators must have good hand-eye coordination, physical stamina, and the ability to work independently or as part of a team. They should also possess problem-solving skills to troubleshoot any issues that may arise during the cutting process.
Estimated Yearly Salary: 197,870 QAR
Estimated Monthly Salary: 16,489 QAR
Estimated Weekly Salary: 3,805 QAR per week
Estimated Hourly Salary: 95 QAR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 15,881 QAR
Estimated Weekly Salary: 3,665 QAR per week
Estimated Hourly Salary: 92 QAR per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 49,426 USD
Estimated Monthly Salary: 4,119 USD
Estimated Weekly Salary: 951 USD per week
Estimated Hourly Salary: 24 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 197,870 QAR
Estimated Monthly Salary: 16,489 QAR
Estimated Weekly Salary: 3,805 QAR per week
Estimated Hourly Salary: 95 QAR per hour
By working as Cutter Operator a person can save up to 1,299 USD per month or 15,586 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Qatar, see costs of living in Qatar.
Estimated Yearly Salary for Cutter Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Network administrator data center (253,959 QAR per year, pre-tax.)
Lead cook (141,141 QAR per year, pre-tax.)
Vending machine attendant (148,966 QAR per year, pre-tax.)
Petroleum gas engineering technician (276,747 QAR per year, pre-tax.)
Process engineering manager (630,128 QAR per year, pre-tax.)
Cutter Operator salary in Qatar
Average Yearly Salary of Cutter Operator in Qatar is approximately 197,870 QAR (49,426 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cutter Operator do?
A cutter operator is responsible for operating cutting machinery to cut materials such as fabric, paper, or metal into specific shapes and sizes. They work in various industries such as manufacturing, printing, textiles, and construction. The primary duties of a cutter operator include setting up and adjusting cutting machines, ensuring the correct measurements and specifications are met, loading materials onto the machine, monitoring the cutting process, and performing routine maintenance on the equipment.
This occupation requires strong attention to detail, technical skills, and the ability to interpret blueprints or design specifications. Cutter operators must have good hand-eye coordination, physical stamina, and the ability to work independently or as part of a team. They should also possess problem-solving skills to troubleshoot any issues that may arise during the cutting process.
Skills: Cutter operator, Cutting machinery, Material cutting, Manufacturing, Textiles, Construction.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cutter Operator make?
Salary details
How much does Cutter Operator make?Estimated Yearly Salary: 197,870 QAR
Estimated Monthly Salary: 16,489 QAR
Estimated Weekly Salary: 3,805 QAR per week
Estimated Hourly Salary: 95 QAR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 190,576 QAREstimated Monthly Salary: 15,881 QAR
Estimated Weekly Salary: 3,665 QAR per week
Estimated Hourly Salary: 92 QAR per hour
Last revision of data: 2024-01-02Cutter Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 49,426 USD
Estimated Monthly Salary: 4,119 USD
Estimated Weekly Salary: 951 USD per week
Estimated Hourly Salary: 24 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Qatar, a sovereign country located in the Middle East, is known for its rich culture and rapid development. With a population of approximately 2.8 million people, Qatar is a relatively small nation. Its total land area covers around 11,586 square kilometers, making it one of the smallest countries in the region.
Estimated national average yearly salary is 256,620 QAR (70,500 USD). Value indicated is pre-tax. Below graph shows estimated Cutter Operator job salary compared to average salary in Qatar.
Comparison shows that a person working as Cutter Operator in Qatar earns on average:
0.77 times the average salary (or 77% of average salary).
Estimated national average yearly salary is 256,620 QAR (70,500 USD). Value indicated is pre-tax. Below graph shows estimated Cutter Operator job salary compared to average salary in Qatar.
Comparison shows that a person working as Cutter Operator in Qatar earns on average:
0.77 times the average salary (or 77% of average salary).
Is Cutter Operator a well paid job?
No, our data shows that Cutter Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Cutter Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Cutter Operator?
High salary for Cutter Operator would be somewhere between 217,657 QAR and 286,912 QAR. However this is an estimation based on Gaussian Distribution.How much can you save working as Cutter Operator in Qatar?
Living in Qatar the approximate monthly expenses are: 2,820 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 197,870 QAR
Estimated Monthly Salary: 16,489 QAR
Estimated Weekly Salary: 3,805 QAR per week
Estimated Hourly Salary: 95 QAR per hour
By working as Cutter Operator a person can save up to 1,299 USD per month or 15,586 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Qatar, see costs of living in Qatar.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Saudi Arabia, United Arab Emirates, Bahrain, Kuwait, Iran. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cutter Operator
Saudi Arabia is 19,353 USD
United Arab Emirates is 34,315 USD
Bahrain is 12,520 USD
Kuwait is 9,385 USD
Iran is 5,513 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Qatar
(2,939,572 QAR per year, pre-tax.)
2. Cardiologist
(2,450,940 QAR per year, pre-tax.)
(2,369,219 QAR per year, pre-tax.)
(2,290,381 QAR per year, pre-tax.)
5. Neurosurgeon
(2,287,404 QAR per year, pre-tax.)
(2,243,832 QAR per year, pre-tax.)
7. Urologist
(2,240,458 QAR per year, pre-tax.)
(2,237,140 QAR per year, pre-tax.)
9. Oncologist
(2,234,247 QAR per year, pre-tax.)
(2,233,539 QAR per year, pre-tax.)
Data as of 2025Random salary:
Network administrator data center (253,959 QAR per year, pre-tax.)
Lead cook (141,141 QAR per year, pre-tax.)
Vending machine attendant (148,966 QAR per year, pre-tax.)
Petroleum gas engineering technician (276,747 QAR per year, pre-tax.)
Process engineering manager (630,128 QAR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=qatar&job=cutter-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cutter-operator-salary-in-qatar-2025.jpg' alt='cutter operator salary in qatar 2025' title='cutter operator salary in qatar 2025' /></a>
Please note:This website presents salary insights for informational purposes only.
Salary data displayed on this site is informational exclusively. Our figures come from various sources, but we do not guarantee their accuracy. Users must always verify salary details with additional resources before making job-related commitments. Salaries fluctuate due to economic trends, job location, and negotiation skills. We cannot offer any assurances about the validity of the provided salary data. By continuing to use this site, you acknowledge these limitations.
Salary details displayed on optisalary.com are meant for reference purposes exclusively. Our data is sourced through various inputs and may not always be up to date. Users must cross-reference salary information through other means before making financial commitments. The figures listed here may change due to variables such as company policies, experience levels, and demand shifts. We do not guarantee that the information displayed is error-free. By using optisalary.com, you agree that salary information is offered 'as is' and without assurances.