Home > Salary > Qatar > Control Automation Technician
A control automation technician is responsible for installing, maintaining, and troubleshooting automated control systems used in various industries. They work with a wide range of equipment, including programmable logic controllers (PLCs), human-machine interfaces (HMIs), sensors, and actuators. Their primary role is to ensure that these systems are operating efficiently and effectively.
Control automation technicians are skilled in reading and interpreting electrical and mechanical schematics, as well as understanding complex control algorithms. They are proficient in programming and configuring control systems, and they regularly test and calibrate equipment to ensure accurate performance. Additionally, they are responsible for identifying and resolving any issues or malfunctions that may arise.
Estimated Yearly Salary: 301,957 QAR
Estimated Monthly Salary: 25,163 QAR
Estimated Weekly Salary: 5,807 QAR per week
Estimated Hourly Salary: 145 QAR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 24,334 QAR
Estimated Weekly Salary: 5,616 QAR per week
Estimated Hourly Salary: 140 QAR per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 75,425 USD
Estimated Monthly Salary: 6,285 USD
Estimated Weekly Salary: 1,450 USD per week
Estimated Hourly Salary: 36 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 301,957 QAR
Estimated Monthly Salary: 25,163 QAR
Estimated Weekly Salary: 5,807 QAR per week
Estimated Hourly Salary: 145 QAR per hour
By working as Control Automation Technician a person can save up to 3,465 USD per month or 41,585 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Qatar, see costs of living in Qatar.
Estimated Yearly Salary for Control Automation Technician
United Arab Emirates is 52,345 USD
31%
Details on Control Automation Technician salary in United Arab Emirates Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Press room supervisor (172,330 QAR per year, pre-tax.)
Geothermal technician (350,412 QAR per year, pre-tax.)
Quality improvement data analyst (341,192 QAR per year, pre-tax.)
Features reporter (283,867 QAR per year, pre-tax.)
Team supervisor call center (296,829 QAR per year, pre-tax.)
Control Automation Technician salary in Qatar
Average Yearly Salary of Control Automation Technician in Qatar is approximately 301,957 QAR (75,425 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Control Automation Technician do?
A control automation technician is responsible for installing, maintaining, and troubleshooting automated control systems used in various industries. They work with a wide range of equipment, including programmable logic controllers (PLCs), human-machine interfaces (HMIs), sensors, and actuators. Their primary role is to ensure that these systems are operating efficiently and effectively.
Control automation technicians are skilled in reading and interpreting electrical and mechanical schematics, as well as understanding complex control algorithms. They are proficient in programming and configuring control systems, and they regularly test and calibrate equipment to ensure accurate performance. Additionally, they are responsible for identifying and resolving any issues or malfunctions that may arise.
Skills: Control Automation Technician, Industrial Automation, PLC Programming, HMI Configuration, Equipment Maintenance, Troubleshooting.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Control Automation Technician make?
Salary details
How much does Control Automation Technician make?Estimated Yearly Salary: 301,957 QAR
Estimated Monthly Salary: 25,163 QAR
Estimated Weekly Salary: 5,807 QAR per week
Estimated Hourly Salary: 145 QAR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 292,012 QAREstimated Monthly Salary: 24,334 QAR
Estimated Weekly Salary: 5,616 QAR per week
Estimated Hourly Salary: 140 QAR per hour
Last revision of data: 2024-01-03Control Automation Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 75,425 USD
Estimated Monthly Salary: 6,285 USD
Estimated Weekly Salary: 1,450 USD per week
Estimated Hourly Salary: 36 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Qatar, a sovereign country located in the Middle East, is known for its rich culture and rapid development. With a population of approximately 2.8 million people, Qatar is a relatively small nation. Its total land area covers around 11,586 square kilometers, making it one of the smallest countries in the region.
Estimated national average yearly salary is 256,620 QAR (70,500 USD). Value indicated is pre-tax. Below graph shows estimated Control Automation Technician job salary compared to average salary in Qatar.
Comparison shows that a person working as Control Automation Technician in Qatar earns on average:
1.18 times the average salary (or 118% of average salary).
Estimated national average yearly salary is 256,620 QAR (70,500 USD). Value indicated is pre-tax. Below graph shows estimated Control Automation Technician job salary compared to average salary in Qatar.
Comparison shows that a person working as Control Automation Technician in Qatar earns on average:
1.18 times the average salary (or 118% of average salary).
Is Control Automation Technician a well paid job?
Yes, our data show that Control Automation Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Control Automation Technician?
High salary for Control Automation Technician would be somewhere between 332,153 QAR and 437,838 QAR. However this is an estimation based on Gaussian Distribution.How much can you save working as Control Automation Technician in Qatar?
Living in Qatar the approximate monthly expenses are: 2,820 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 301,957 QAR
Estimated Monthly Salary: 25,163 QAR
Estimated Weekly Salary: 5,807 QAR per week
Estimated Hourly Salary: 145 QAR per hour
By working as Control Automation Technician a person can save up to 3,465 USD per month or 41,585 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Qatar, see costs of living in Qatar.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Saudi Arabia, United Arab Emirates, Bahrain, Kuwait, Iran. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Control Automation Technician
Saudi Arabia is 29,473 USDUnited Arab Emirates is 52,345 USD 31%Details on Control Automation Technician salary in United Arab Emirates
Bahrain is 19,172 USD
Kuwait is 14,401 USD
Iran is 8,473 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Qatar
(2,939,572 QAR per year, pre-tax.)
2. Cardiologist
(2,450,940 QAR per year, pre-tax.)
(2,369,219 QAR per year, pre-tax.)
(2,290,381 QAR per year, pre-tax.)
5. Neurosurgeon
(2,287,404 QAR per year, pre-tax.)
(2,243,832 QAR per year, pre-tax.)
7. Urologist
(2,240,458 QAR per year, pre-tax.)
(2,237,140 QAR per year, pre-tax.)
9. Oncologist
(2,234,247 QAR per year, pre-tax.)
(2,233,539 QAR per year, pre-tax.)
Data as of 2025Random salary:
Press room supervisor (172,330 QAR per year, pre-tax.)
Geothermal technician (350,412 QAR per year, pre-tax.)
Quality improvement data analyst (341,192 QAR per year, pre-tax.)
Features reporter (283,867 QAR per year, pre-tax.)
Team supervisor call center (296,829 QAR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=qatar&job=control-automation-technician'><img src='https://optisalary.com/wp-content/graphs/salary/control-automation-technician-salary-in-qatar-2025.jpg' alt='control automation technician salary in qatar 2025' title='control automation technician salary in qatar 2025' /></a>
Please note:The salary figures presented here are meant for informational purposes only.
This website provides salary data solely for informational purposes. While we strive for accuracy, we cannot ensure the precision of all figures. Users must double-check salary details with reliable sources before making career-related decisions. Salary estimates can fluctuate based on numerous factors, such as company size, negotiation tactics, and industry demand. We assume no responsibility for misinterpretations in the pay estimates provided. By accessing optisalary.com, you acknowledge that salary data is not absolute.
optisalary.com presents salary estimates for educational purposes exclusively. While we collect data from various sources, we do not guarantee full reliability. Users are encouraged to consult trusted platforms before making major financial decisions. Salaries shift due to various elements, such as market demand, employer policies, and geographic location. We cannot provide warranty regarding the validity of the displayed salary data. Your continued access of this site confirms your understanding of these conditions.