Home > Salary > Pakistan > Rubber Molder
A rubber molder is a skilled professional who specializes in shaping and molding rubber materials into various products. This occupation requires expertise in operating molding machines, interpreting blueprints or specifications, and selecting appropriate molds and materials. Rubber molders are responsible for preparing and mixing raw materials, such as rubber compounds and additives, to create the desired consistency and quality. They then pour or inject the mixture into molds, using precision and attention to detail to ensure accurate dimensions and smooth finishes. After the molding process, rubber molders may also be involved in trimming excess material, inspecting finished products for defects, and performing basic maintenance on machinery. This occupation requires physical dexterity, technical knowledge of rubber properties, and the ability to work independently or as part of a team.
Estimated Yearly Salary: 317,703 PKR
Estimated Monthly Salary: 26,475 PKR
Estimated Weekly Salary: 6,110 PKR per week
Estimated Hourly Salary: 153 PKR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 25,648 PKR
Estimated Weekly Salary: 5,919 PKR per week
Estimated Hourly Salary: 148 PKR per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 978 USD
Estimated Monthly Salary: 82 USD
Estimated Weekly Salary: 19 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 317,703 PKR
Estimated Monthly Salary: 26,475 PKR
Estimated Weekly Salary: 6,110 PKR per week
Estimated Hourly Salary: 153 PKR per hour
By working as Rubber Molder a person can save up to 18 USD per month or 220 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Pakistan, see costs of living in Pakistan.
Estimated Yearly Salary for Rubber Molder
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Pump technician (386,100 PKR per year, pre-tax.)
Factory manager (843,156 PKR per year, pre-tax.)
Program manager engineering (845,521 PKR per year, pre-tax.)
Trauma nurse (738,725 PKR per year, pre-tax.)
Food beverage outlet manager (562,878 PKR per year, pre-tax.)
Rubber Molder salary in Pakistan
Average Yearly Salary of Rubber Molder in Pakistan is approximately 317,703 PKR (978 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Rubber Molder do?

Skills: rubber molding, molding machines, rubber compounds, manufacturing, precision, quality control
Job industry: Manufacturing
Job industry: Manufacturing
How much does Rubber Molder make?
Salary details
How much does Rubber Molder make?Estimated Yearly Salary: 317,703 PKR
Estimated Monthly Salary: 26,475 PKR
Estimated Weekly Salary: 6,110 PKR per week
Estimated Hourly Salary: 153 PKR per hour
Comparing salary to last year:
Estimated Yearly Salary: 307,775 PKREstimated Monthly Salary: 25,648 PKR
Estimated Weekly Salary: 5,919 PKR per week
Estimated Hourly Salary: 148 PKR per hour
Rubber Molder estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 978 USD
Estimated Monthly Salary: 82 USD
Estimated Weekly Salary: 19 USD per week
Estimated Hourly Salary: 0 USD per hour
Difference in salary year over year or average salary increase is approximately
About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Pakistan is a country located in South Asia. It has a population of over 220 million people, making it the fifth most populous country in the world. The land area of Pakistan is approximately 881,913 square kilometers, making it the 33rd largest country in terms of size.
Estimated national average yearly salary is 471,440 PKR (1,580 USD). Value indicated is pre-tax. Below graph shows estimated Rubber Molder job salary compared to average salary in Pakistan.
Comparison shows that a person working as Rubber Molder in Pakistan earns on average:
0.67 times the average salary (or 67% of average salary).
Estimated national average yearly salary is 471,440 PKR (1,580 USD). Value indicated is pre-tax. Below graph shows estimated Rubber Molder job salary compared to average salary in Pakistan.
Comparison shows that a person working as Rubber Molder in Pakistan earns on average:
0.67 times the average salary (or 67% of average salary).
Is Rubber Molder a well paid job?
No, our data shows that Rubber Molder is typically not a well-paid job. The salary varies based on experience. Meaning that even though Rubber Molder might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Rubber Molder?
High salary for Rubber Molder would be somewhere between 349,473 PKR and 460,669 PKR. However this is an estimation based on Gaussian Distribution.How much can you save working as Rubber Molder in Pakistan?
Living in Pakistan the approximate monthly expenses are: 63 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 317,703 PKR
Estimated Monthly Salary: 26,475 PKR
Estimated Weekly Salary: 6,110 PKR per week
Estimated Hourly Salary: 153 PKR per hour
By working as Rubber Molder a person can save up to 18 USD per month or 220 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Pakistan, see costs of living in Pakistan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Afghanistan, China, India, Iran. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Rubber Molder
Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
- 6 to 10 years of experience yields
- 11 to 15 years of experience yields
- 16 to 25 years of experience yields
- more than 25 years of experience yields
Top 10 highest salaries in Pakistan
(5,367,360 PKR per year, pre-tax.)
2. Cardiologist
(4,470,921 PKR per year, pre-tax.)
(4,299,601 PKR per year, pre-tax.)
4. Neurosurgeon
(4,192,847 PKR per year, pre-tax.)
(4,179,140 PKR per year, pre-tax.)
(4,084,994 PKR per year, pre-tax.)
(4,081,850 PKR per year, pre-tax.)
8. Urologist
(4,079,620 PKR per year, pre-tax.)
(4,075,219 PKR per year, pre-tax.)
10. Plastic surgeon
(4,074,700 PKR per year, pre-tax.)
Random salary:
Pump technician (386,100 PKR per year, pre-tax.)
Factory manager (843,156 PKR per year, pre-tax.)
Program manager engineering (845,521 PKR per year, pre-tax.)
Trauma nurse (738,725 PKR per year, pre-tax.)
Food beverage outlet manager (562,878 PKR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.

Salary information displayed on this site is for reference exclusively.
The salary figures on optisalary.com are meant for informational use exclusively. We collect salary data from varied sources, but do not guarantee complete precision. Users should independently confirm salaries before making career decisions. Salary variations occur due to industry standards, demand shifts, and location. We disclaim any warranty regarding the correctness of the listed salary data. By using this site, you agree that salary data is not definitive.
optisalary.com offers salary estimates for informational purposes only. While we gather data from various providers, we do not guarantee full reliability. Users are encouraged to review trusted organizations before making major financial decisions. Salaries shift due to numerous factors, such as market demand, employer policies, and geographic location. We make no guarantee regarding the validity of the displayed salary data. Your use of this site indicates your understanding of these conditions.