Home > Salary > Norway > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 1,331,151 NOK
Estimated Monthly Salary: 110,929 NOK
Estimated Weekly Salary: 25,599 NOK per week
Estimated Hourly Salary: 640 NOK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 106,882 NOK
Estimated Weekly Salary: 24,665 NOK per week
Estimated Hourly Salary: 617 NOK per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 120,238 USD
Estimated Monthly Salary: 10,020 USD
Estimated Weekly Salary: 2,312 USD per week
Estimated Hourly Salary: 58 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,331,151 NOK
Estimated Monthly Salary: 110,929 NOK
Estimated Weekly Salary: 25,599 NOK per week
Estimated Hourly Salary: 640 NOK per hour
By working as Injection Molding Engineer a person can save up to 6,199 USD per month or 74,393 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Norway, see costs of living in Norway.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Data input specialist (755,810 NOK per year, pre-tax.)
Bagger (284,898 NOK per year, pre-tax.)
Accounts payable manager (1,094,313 NOK per year, pre-tax.)
E-learning specialist (1,256,654 NOK per year, pre-tax.)
Dog obedience trainerinstructor (498,303 NOK per year, pre-tax.)
Injection Molding Engineer salary in Norway
Average Yearly Salary of Injection Molding Engineer in Norway is approximately 1,331,151 NOK (120,238 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 1,331,151 NOK
Estimated Monthly Salary: 110,929 NOK
Estimated Weekly Salary: 25,599 NOK per week
Estimated Hourly Salary: 640 NOK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,282,589 NOKEstimated Monthly Salary: 106,882 NOK
Estimated Weekly Salary: 24,665 NOK per week
Estimated Hourly Salary: 617 NOK per hour
Last revision of data: 2024-01-09Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 120,238 USD
Estimated Monthly Salary: 10,020 USD
Estimated Weekly Salary: 2,312 USD per week
Estimated Hourly Salary: 58 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Norway, located in Northern Europe, is a country known for its stunning natural landscapes, including fjords, mountains, and forests. With a population of approximately 5.4 million people, it is one of the least densely populated countries in Europe. The size of Norway is around 323,802 square kilometers, making it larger than many European countries.
Estimated national average yearly salary is 977,067 NOK (95,510 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Norway.
Comparison shows that a person working as Injection Molding Engineer in Norway earns on average:
1.36 times the average salary (or 136% of average salary).
Estimated national average yearly salary is 977,067 NOK (95,510 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Norway.
Comparison shows that a person working as Injection Molding Engineer in Norway earns on average:
1.36 times the average salary (or 136% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 1,464,266 NOK and 1,930,169 NOK. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Norway?
Living in Norway the approximate monthly expenses are: 3,820 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,331,151 NOK
Estimated Monthly Salary: 110,929 NOK
Estimated Weekly Salary: 25,599 NOK per week
Estimated Hourly Salary: 640 NOK per hour
By working as Injection Molding Engineer a person can save up to 6,199 USD per month or 74,393 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Norway, see costs of living in Norway.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Sweden, Finland, Russia, Denmark. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Sweden is 79,606 USD
Finland is 68,531 USD
Russia is 16,182 USD
Denmark is 92,642 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Norway
(10,937,756 NOK per year, pre-tax.)
2. Cardiologist
(9,106,184 NOK per year, pre-tax.)
(8,829,745 NOK per year, pre-tax.)
4. Neurosurgeon
(8,566,101 NOK per year, pre-tax.)
(8,524,526 NOK per year, pre-tax.)
6. Oncologist
(8,361,766 NOK per year, pre-tax.)
7. Urologist
(8,317,150 NOK per year, pre-tax.)
(8,311,831 NOK per year, pre-tax.)
(8,311,163 NOK per year, pre-tax.)
(8,310,747 NOK per year, pre-tax.)
Data as of 2025Random salary:
Data input specialist (755,810 NOK per year, pre-tax.)
Bagger (284,898 NOK per year, pre-tax.)
Accounts payable manager (1,094,313 NOK per year, pre-tax.)
E-learning specialist (1,256,654 NOK per year, pre-tax.)
Dog obedience trainerinstructor (498,303 NOK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=norway&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-norway-2025.jpg' alt='injection molding engineer salary in norway 2025' title='injection molding engineer salary in norway 2025' /></a>
Please note:The salary figures on this website are meant for reference use only.
Salary details displayed on this website are meant for reference purposes exclusively. Our data is sourced through various sources and may not always be up to date. Users should verify salary information independently before making financial commitments. The figures shown here may change due to factors such as location, industry standards, and individual skill sets. We cannot warrant that the information displayed is error-free. By accessing this website, you accept that salary information is presented 'as is' and without assurances.
optisalary.com provides salary data solely for reference purposes. While we endeavor for accuracy, we cannot guarantee the validity of all figures. Users should verify salary details with reliable organizations before making career-related plans. Salary estimates may fluctuate based on multiple elements, such as geographic location, experience, and job role. We accept no responsibility for misinterpretations in the salary figures provided. By using this website, you acknowledge that salary data is subject to change.