Home > Salary > Netherlands > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 56,271 EUR
Estimated Monthly Salary: 4,689 EUR
Estimated Weekly Salary: 1,082 EUR per week
Estimated Hourly Salary: 27 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 4,538 EUR
Estimated Weekly Salary: 1,047 EUR per week
Estimated Hourly Salary: 26 EUR per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 56,521 USD
Estimated Monthly Salary: 4,710 USD
Estimated Weekly Salary: 1,087 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 56,271 EUR
Estimated Monthly Salary: 4,689 EUR
Estimated Weekly Salary: 1,082 EUR per week
Estimated Hourly Salary: 27 EUR per hour
By working as Metrology Calibration Technician a person can save up to 2,413 USD per month or 28,955 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Netherlands, see costs of living in Netherlands.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Meat director (71,169 EUR per year, pre-tax.)
Textile knitting and weaving machine setter operator tender (23,582 EUR per year, pre-tax.)
Marketing copywriter (41,153 EUR per year, pre-tax.)
Sap sd functional analyst (87,866 EUR per year, pre-tax.)
Professor of mathematics (104,540 EUR per year, pre-tax.)
Metrology Calibration Technician salary in Netherlands
Average Yearly Salary of Metrology Calibration Technician in Netherlands is approximately 56,271 EUR (56,521 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 56,271 EUR
Estimated Monthly Salary: 4,689 EUR
Estimated Weekly Salary: 1,082 EUR per week
Estimated Hourly Salary: 27 EUR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 54,461 EUREstimated Monthly Salary: 4,538 EUR
Estimated Weekly Salary: 1,047 EUR per week
Estimated Hourly Salary: 26 EUR per hour
Last revision of data: 2024-01-03Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 56,521 USD
Estimated Monthly Salary: 4,710 USD
Estimated Weekly Salary: 1,087 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
The Netherlands, often referred to as Holland, is a country located in Northwestern Europe. It has a population of approximately 17.5 million people and covers an area of about 41,500 square kilometers. The country is known for its flat landscape, extensive canal systems, windmills, and tulip fields. The Netherlands is famous for its progressive and liberal culture, with Amsterdam being the capital and largest city.
Estimated national average yearly salary is 52,330 EUR (57,430 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Netherlands.
Comparison shows that a person working as Metrology Calibration Technician in Netherlands earns on average:
1.08 times the average salary (or 108% of average salary).
Estimated national average yearly salary is 52,330 EUR (57,430 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Netherlands.
Comparison shows that a person working as Metrology Calibration Technician in Netherlands earns on average:
1.08 times the average salary (or 108% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 61,898 EUR and 81,593 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in Netherlands?
Living in Netherlands the approximate monthly expenses are: 2,297 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 56,271 EUR
Estimated Monthly Salary: 4,689 EUR
Estimated Weekly Salary: 1,082 EUR per week
Estimated Hourly Salary: 27 EUR per hour
By working as Metrology Calibration Technician a person can save up to 2,413 USD per month or 28,955 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Netherlands, see costs of living in Netherlands.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Belgium, Germany. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Belgium is 47,707 USD
Germany is 52,385 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Netherlands
(599,988 EUR per year, pre-tax.)
2. Cardiologist
(500,141 EUR per year, pre-tax.)
(482,247 EUR per year, pre-tax.)
4. Neurosurgeon
(466,119 EUR per year, pre-tax.)
(465,662 EUR per year, pre-tax.)
(457,203 EUR per year, pre-tax.)
7. Urologist
(456,272 EUR per year, pre-tax.)
(456,212 EUR per year, pre-tax.)
9. Oncologist
(455,338 EUR per year, pre-tax.)
10. Plastic surgeon
(455,115 EUR per year, pre-tax.)
Data as of 2025Random salary:
Meat director (71,169 EUR per year, pre-tax.)
Textile knitting and weaving machine setter operator tender (23,582 EUR per year, pre-tax.)
Marketing copywriter (41,153 EUR per year, pre-tax.)
Sap sd functional analyst (87,866 EUR per year, pre-tax.)
Professor of mathematics (104,540 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=netherlands&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-netherlands-2025.jpg' alt='metrology calibration technician salary in netherlands 2025' title='metrology calibration technician salary in netherlands 2025' /></a>
Please note:The salary figures presented here are intended for reference purposes only.
This website aggregates salary data for educational use exclusively. While we endeavor to deliver correct estimates, we cannot warrant their full reliability. Users are strongly encouraged to check with additional sources before finalizing financial plans. Salary amounts vary based on multiple conditions, such as location, job role, and individual qualifications. We do not offer any claims as to the correctness of the provided information. Your use of this site indicates acceptance of this notice.
This website compiles salary data for reference purposes only. While we strive to deliver correct estimates, we cannot warrant their full precision. Users are strongly advised to consult additional sources before finalizing financial plans. Salary figures fluctuate based on several conditions, such as industry trends, negotiation power, and regional demand. We make no claims as to the validity of the listed information. Your access of this site acknowledges acceptance of this notice.