Home > Salary > Netherlands > Engine Lathe Setup Operator
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Estimated Yearly Salary: 47,265 EUR
Estimated Monthly Salary: 3,939 EUR
Estimated Weekly Salary: 909 EUR per week
Estimated Hourly Salary: 23 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,808 EUR
Estimated Weekly Salary: 879 EUR per week
Estimated Hourly Salary: 22 EUR per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 47,431 USD
Estimated Monthly Salary: 3,953 USD
Estimated Weekly Salary: 912 USD per week
Estimated Hourly Salary: 23 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 47,265 EUR
Estimated Monthly Salary: 3,939 EUR
Estimated Weekly Salary: 909 EUR per week
Estimated Hourly Salary: 23 EUR per hour
By working as Engine Lathe Setup Operator a person can save up to 1,655 USD per month or 19,865 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Netherlands, see costs of living in Netherlands.
Estimated Yearly Salary for Engine Lathe Setup Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Vice president (vp), public policy (127,157 EUR per year, pre-tax.)
Business analyst database (52,712 EUR per year, pre-tax.)
Embroidery machine operator (24,595 EUR per year, pre-tax.)
Utilization management (um), director (109,727 EUR per year, pre-tax.)
Maintenance gardener (35,591 EUR per year, pre-tax.)
Engine Lathe Setup Operator salary in Netherlands
Average Yearly Salary of Engine Lathe Setup Operator in Netherlands is approximately 47,265 EUR (47,431 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Engine Lathe Setup Operator do?
An engine lathe setup operator is responsible for setting up and operating engine lathes, which are machines used to shape and cut metal. They interpret blueprints, select and install appropriate cutting tools, adjust machine settings, and ensure the correct alignment of workpieces. The operator must have a strong understanding of machining principles and be skilled in using various measuring instruments to ensure precision and accuracy. They monitor the machine's performance, make necessary adjustments, and troubleshoot any issues that may arise during the operation. Safety protocols must be followed at all times, including wearing protective gear and ensuring proper handling of materials. This occupation requires good manual dexterity, attention to detail, and the ability to work independently.
Skills: Engine lathe setup operator, Machining, Metalworking, Precision, Manufacturing, Mechanical engineering.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Engine Lathe Setup Operator make?
Salary details
How much does Engine Lathe Setup Operator make?Estimated Yearly Salary: 47,265 EUR
Estimated Monthly Salary: 3,939 EUR
Estimated Weekly Salary: 909 EUR per week
Estimated Hourly Salary: 23 EUR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 45,697 EUREstimated Monthly Salary: 3,808 EUR
Estimated Weekly Salary: 879 EUR per week
Estimated Hourly Salary: 22 EUR per hour
Last revision of data: 2024-01-07Engine Lathe Setup Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 47,431 USD
Estimated Monthly Salary: 3,953 USD
Estimated Weekly Salary: 912 USD per week
Estimated Hourly Salary: 23 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
The Netherlands, often referred to as Holland, is a country located in Northwestern Europe. It has a population of approximately 17.5 million people and covers an area of about 41,500 square kilometers. The country is known for its flat landscape, extensive canal systems, windmills, and tulip fields. The Netherlands is famous for its progressive and liberal culture, with Amsterdam being the capital and largest city.
Estimated national average yearly salary is 52,330 EUR (57,430 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Netherlands.
Comparison shows that a person working as Engine Lathe Setup Operator in Netherlands earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 52,330 EUR (57,430 USD). Value indicated is pre-tax. Below graph shows estimated Engine Lathe Setup Operator job salary compared to average salary in Netherlands.
Comparison shows that a person working as Engine Lathe Setup Operator in Netherlands earns on average:
0.9 times the average salary (or 90% of average salary).
Is Engine Lathe Setup Operator a well paid job?
Yes, our data show that Engine Lathe Setup Operator is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Engine Lathe Setup Operator?
High salary for Engine Lathe Setup Operator would be somewhere between 51,992 EUR and 68,534 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Engine Lathe Setup Operator in Netherlands?
Living in Netherlands the approximate monthly expenses are: 2,297 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 47,265 EUR
Estimated Monthly Salary: 3,939 EUR
Estimated Weekly Salary: 909 EUR per week
Estimated Hourly Salary: 23 EUR per hour
By working as Engine Lathe Setup Operator a person can save up to 1,655 USD per month or 19,865 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Netherlands, see costs of living in Netherlands.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Belgium, Germany. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Engine Lathe Setup Operator
Belgium is 40,102 USD
Germany is 44,008 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Netherlands
(599,988 EUR per year, pre-tax.)
2. Cardiologist
(500,141 EUR per year, pre-tax.)
(482,247 EUR per year, pre-tax.)
4. Neurosurgeon
(466,119 EUR per year, pre-tax.)
(465,662 EUR per year, pre-tax.)
(457,203 EUR per year, pre-tax.)
7. Urologist
(456,272 EUR per year, pre-tax.)
(456,212 EUR per year, pre-tax.)
9. Oncologist
(455,338 EUR per year, pre-tax.)
10. Plastic surgeon
(455,115 EUR per year, pre-tax.)
Data as of 2025Random salary:
Vice president (vp), public policy (127,157 EUR per year, pre-tax.)
Business analyst database (52,712 EUR per year, pre-tax.)
Embroidery machine operator (24,595 EUR per year, pre-tax.)
Utilization management (um), director (109,727 EUR per year, pre-tax.)
Maintenance gardener (35,591 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=netherlands&job=engine-lathe-setup-operator'><img src='https://optisalary.com/wp-content/graphs/salary/engine-lathe-setup-operator-salary-in-netherlands-2025.jpg' alt='engine lathe setup operator salary in netherlands 2025' title='engine lathe setup operator salary in netherlands 2025' /></a>
Please note:The salary figures presented here are meant for reference purposes solely.
optisalary.com provides salary figures solely for reference use. While we endeavor for accuracy, we cannot ensure the validity of all figures. Users must double-check salary details with reliable sources before making financial decisions. Salary estimates can fluctuate based on multiple elements, such as geographic location, experience, and job role. We accept no liability for errors in the pay estimates provided. By using this website, you acknowledge that salary data is subject to change.
Salary details displayed on optisalary.com are meant for reference purposes exclusively. Our data is sourced through multiple sources and may not always be up to date. Users must verify salary information through other means before making financial decisions. The figures shown here may change due to variables such as location, industry standards, and individual skill sets. We cannot guarantee that the information displayed is error-free. By using optisalary.com, you agree that salary information is presented 'as is' and without warranties.