Home > Salary > Myanmar > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 6,231,214 MMK
Estimated Monthly Salary: 519,268 MMK
Estimated Weekly Salary: 119,831 MMK per week
Estimated Hourly Salary: 2,996 MMK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 503,140 MMK
Estimated Weekly Salary: 116,109 MMK per week
Estimated Hourly Salary: 2,903 MMK per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 2,736 USD
Estimated Monthly Salary: 228 USD
Estimated Weekly Salary: 53 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 6,231,214 MMK
Estimated Monthly Salary: 519,268 MMK
Estimated Weekly Salary: 119,831 MMK per week
Estimated Hourly Salary: 2,996 MMK per hour
By working as Mechanical Calibration Technician a person can save up to 88 USD per month or 1,051 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Myanmar, see costs of living in Myanmar.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Store detective (3,318,289 MMK per year, pre-tax.)
Account advocate (6,571,695 MMK per year, pre-tax.)
Regional underwriting manager (16,716,864 MMK per year, pre-tax.)
Cnc router operator (4,258,204 MMK per year, pre-tax.)
Fitness specialist (5,596,933 MMK per year, pre-tax.)
Mechanical Calibration Technician salary in Myanmar
Average Yearly Salary of Mechanical Calibration Technician in Myanmar is approximately 6,231,214 MMK (2,736 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 6,231,214 MMK
Estimated Monthly Salary: 519,268 MMK
Estimated Weekly Salary: 119,831 MMK per week
Estimated Hourly Salary: 2,996 MMK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 6,037,680 MMKEstimated Monthly Salary: 503,140 MMK
Estimated Weekly Salary: 116,109 MMK per week
Estimated Hourly Salary: 2,903 MMK per hour
Last revision of data: 2024-01-08Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,736 USD
Estimated Monthly Salary: 228 USD
Estimated Weekly Salary: 53 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Myanmar, also known as Burma, is a country located in Southeast Asia. With a population of approximately 54 million people, it is the 26th most populous country in the world. The nation covers an area of around 676,578 square kilometers, making it the 40th largest country in terms of land area.
Estimated national average yearly salary is 7,363,980 MMK (3,510 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Myanmar.
Comparison shows that a person working as Mechanical Calibration Technician in Myanmar earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 7,363,980 MMK (3,510 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Myanmar.
Comparison shows that a person working as Mechanical Calibration Technician in Myanmar earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 6,854,335 MMK and 9,035,260 MMK. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Myanmar?
Living in Myanmar the approximate monthly expenses are: 140 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 6,231,214 MMK
Estimated Monthly Salary: 519,268 MMK
Estimated Weekly Salary: 119,831 MMK per week
Estimated Hourly Salary: 2,996 MMK per hour
By working as Mechanical Calibration Technician a person can save up to 88 USD per month or 1,051 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Myanmar, see costs of living in Myanmar.
Salary comparison to region and neighbouring coutries
Country's neighbours are: India, Bangladesh, China, Laos, Thailand. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
India is 17,435 USD
Bangladesh is 2,190 USD
China is 9,982 USD
Thailand is 5,646 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Myanmar
(83,862,518 MMK per year, pre-tax.)
2. Cardiologist
(69,987,991 MMK per year, pre-tax.)
(67,281,160 MMK per year, pre-tax.)
(65,258,796 MMK per year, pre-tax.)
5. Neurosurgeon
(65,192,663 MMK per year, pre-tax.)
(63,906,515 MMK per year, pre-tax.)
(63,864,729 MMK per year, pre-tax.)
8. Oncologist
(63,598,524 MMK per year, pre-tax.)
9. Urologist
(63,573,880 MMK per year, pre-tax.)
10. Dermatologist
(63,550,989 MMK per year, pre-tax.)
Data as of 2025Random salary:
Store detective (3,318,289 MMK per year, pre-tax.)
Account advocate (6,571,695 MMK per year, pre-tax.)
Regional underwriting manager (16,716,864 MMK per year, pre-tax.)
Cnc router operator (4,258,204 MMK per year, pre-tax.)
Fitness specialist (5,596,933 MMK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=myanmar&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-myanmar-2025.jpg' alt='mechanical calibration technician salary in myanmar 2025' title='mechanical calibration technician salary in myanmar 2025' /></a>
Please note:This website aggregates salary data for informational use only.
Salary details displayed on optisalary.com are intended for informational use only. Our data is sourced through multiple inputs and may not always be up to date. Users must cross-reference salary information independently before making employment decisions. The figures listed here may change due to factors such as company policies, experience levels, and demand shifts. We cannot warrant that the data provided is error-free. By using optisalary.com, you agree that salary information is offered 'as is' and without warranties.
This website aggregates salary data for educational purposes only. While we endeavor to present accurate figures, we cannot ensure their absolute reliability. Users are strongly encouraged to check with other sources before making career-related decisions. Salary amounts fluctuate based on several conditions, such as location, job role, and individual qualifications. We do not offer any guarantees as to the validity of the provided data. Your access of this site indicates agreement of this disclaimer.