Home > Salary > Morocco > Senior Tooling Engineer
A senior tooling engineer is responsible for designing, developing, and implementing tools and equipment used in manufacturing processes. They work closely with cross-functional teams to understand production requirements and develop innovative solutions to enhance productivity, efficiency, and quality. Senior tooling engineers also provide technical expertise and guidance to junior engineers and technicians in the design, fabrication, and maintenance of tools and equipment. They conduct feasibility studies, cost analysis, and risk assessments to ensure the successful implementation of new tooling technologies. Additionally, they collaborate with suppliers to source and evaluate new materials and technologies that can improve tooling performance.
Estimated Yearly Salary: 318,926 MAD
Estimated Monthly Salary: 26,577 MAD
Estimated Weekly Salary: 6,133 MAD per week
Estimated Hourly Salary: 153 MAD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 25,629 MAD
Estimated Weekly Salary: 5,914 MAD per week
Estimated Hourly Salary: 148 MAD per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 28,853 USD
Estimated Monthly Salary: 2,404 USD
Estimated Weekly Salary: 555 USD per week
Estimated Hourly Salary: 14 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 318,926 MAD
Estimated Monthly Salary: 26,577 MAD
Estimated Weekly Salary: 6,133 MAD per week
Estimated Hourly Salary: 153 MAD per hour
By working as Senior Tooling Engineer a person can save up to 1,804 USD per month or 21,653 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Estimated Yearly Salary for Senior Tooling Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Wildlife rehabilitator (115,802 MAD per year, pre-tax.)
Taco bell manager (179,850 MAD per year, pre-tax.)
Legislative advocate (137,842 MAD per year, pre-tax.)
Racehorse trainer (157,723 MAD per year, pre-tax.)
Registered nurse (rn), utilization review (ur) (223,014 MAD per year, pre-tax.)
Senior Tooling Engineer salary in Morocco
Average Yearly Salary of Senior Tooling Engineer in Morocco is approximately 318,926 MAD (28,853 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Senior Tooling Engineer do?
A senior tooling engineer is responsible for designing, developing, and implementing tools and equipment used in manufacturing processes. They work closely with cross-functional teams to understand production requirements and develop innovative solutions to enhance productivity, efficiency, and quality. Senior tooling engineers also provide technical expertise and guidance to junior engineers and technicians in the design, fabrication, and maintenance of tools and equipment. They conduct feasibility studies, cost analysis, and risk assessments to ensure the successful implementation of new tooling technologies. Additionally, they collaborate with suppliers to source and evaluate new materials and technologies that can improve tooling performance.
Skills: senior tooling engineer, manufacturing, tool design, equipment development, process improvement, technical expertise
Job industry: Manufacturing
Job industry: Manufacturing
How much does Senior Tooling Engineer make?
Salary details
How much does Senior Tooling Engineer make?Estimated Yearly Salary: 318,926 MAD
Estimated Monthly Salary: 26,577 MAD
Estimated Weekly Salary: 6,133 MAD per week
Estimated Hourly Salary: 153 MAD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 307,549 MADEstimated Monthly Salary: 25,629 MAD
Estimated Weekly Salary: 5,914 MAD per week
Estimated Hourly Salary: 148 MAD per hour
Last revision of data: 2024-01-06Senior Tooling Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 28,853 USD
Estimated Monthly Salary: 2,404 USD
Estimated Weekly Salary: 555 USD per week
Estimated Hourly Salary: 14 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Morocco is a country located in North Africa. It has a population of approximately 36 million people and covers an area of about 446,550 square kilometers. The country is known for its diverse landscapes, including the Atlas Mountains, Sahara Desert, and coastal regions.
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Morocco.
Comparison shows that a person working as Senior Tooling Engineer in Morocco earns on average:
2.13 times the average salary (or 213% of average salary).
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Morocco.
Comparison shows that a person working as Senior Tooling Engineer in Morocco earns on average:
2.13 times the average salary (or 213% of average salary).
Is Senior Tooling Engineer a well paid job?
Yes, our data show that Senior Tooling Engineer is a very well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Senior Tooling Engineer?
High salary for Senior Tooling Engineer would be somewhere between 350,819 MAD and 462,443 MAD. However this is an estimation based on Gaussian Distribution.How much can you save working as Senior Tooling Engineer in Morocco?
Living in Morocco the approximate monthly expenses are: 600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 318,926 MAD
Estimated Monthly Salary: 26,577 MAD
Estimated Weekly Salary: 6,133 MAD per week
Estimated Hourly Salary: 153 MAD per hour
By working as Senior Tooling Engineer a person can save up to 1,804 USD per month or 21,653 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Algeria, Western Sahara, Spain. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Senior Tooling Engineer
Algeria is 27,097 USD
Spain is 61,101 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Morocco
(1,720,305 MAD per year, pre-tax.)
2. Cardiologist
(1,434,963 MAD per year, pre-tax.)
(1,385,679 MAD per year, pre-tax.)
4. Neurosurgeon
(1,340,476 MAD per year, pre-tax.)
(1,339,746 MAD per year, pre-tax.)
(1,312,948 MAD per year, pre-tax.)
(1,311,162 MAD per year, pre-tax.)
(1,309,794 MAD per year, pre-tax.)
9. Urologist
(1,309,746 MAD per year, pre-tax.)
(1,308,087 MAD per year, pre-tax.)
Data as of 2025Random salary:
Wildlife rehabilitator (115,802 MAD per year, pre-tax.)
Taco bell manager (179,850 MAD per year, pre-tax.)
Legislative advocate (137,842 MAD per year, pre-tax.)
Racehorse trainer (157,723 MAD per year, pre-tax.)
Registered nurse (rn), utilization review (ur) (223,014 MAD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=morocco&job=senior-tooling-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/senior-tooling-engineer-salary-in-morocco-2025.jpg' alt='senior tooling engineer salary in morocco 2025' title='senior tooling engineer salary in morocco 2025' /></a>
Please note:This website presents salary data for informational use only.
The salary data on this site is intended for informational purposes exclusively. We provide salary insights derived from multiple sources, but cannot guarantee complete precision. Users should always verify salary details with other trusted sources before making career-related choices. Variations in salary figures may arise due to several circumstances, including location, experience, and industry. We do not extend any guarantee regarding the entirety of the provided salary data. Use of optisalary.com implies acknowledgment of these conditions.
The salary estimates on this website are meant for reference use only. We compile salary data from multiple sources, but do not ensure absolute accuracy. Users should on their own confirm salaries before making financial decisions. Salary fluctuations occur due to company policies, negotiation skills, and experience levels. We disclaim any guarantee regarding the validity of the listed salary data. By using this site, you acknowledge that salary data is subject to updates.