Home > Salary > Morocco > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 162,321 MAD
Estimated Monthly Salary: 13,527 MAD
Estimated Weekly Salary: 3,122 MAD per week
Estimated Hourly Salary: 78 MAD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 13,040 MAD
Estimated Weekly Salary: 3,009 MAD per week
Estimated Hourly Salary: 75 MAD per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 14,745 USD
Estimated Monthly Salary: 1,229 USD
Estimated Weekly Salary: 284 USD per week
Estimated Hourly Salary: 7 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 162,321 MAD
Estimated Monthly Salary: 13,527 MAD
Estimated Weekly Salary: 3,122 MAD per week
Estimated Hourly Salary: 78 MAD per hour
By working as Metrology Calibration Technician a person can save up to 629 USD per month or 7,545 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Radiation engineer (182,905 MAD per year, pre-tax.)
Office support specialist (76,873 MAD per year, pre-tax.)
Kitchen lead (71,940 MAD per year, pre-tax.)
Quality control supervisor (food beverage) (141,000 MAD per year, pre-tax.)
Digital analyst (206,814 MAD per year, pre-tax.)
Metrology Calibration Technician salary in Morocco
Average Yearly Salary of Metrology Calibration Technician in Morocco is approximately 162,321 MAD (14,745 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 162,321 MAD
Estimated Monthly Salary: 13,527 MAD
Estimated Weekly Salary: 3,122 MAD per week
Estimated Hourly Salary: 78 MAD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 156,475 MADEstimated Monthly Salary: 13,040 MAD
Estimated Weekly Salary: 3,009 MAD per week
Estimated Hourly Salary: 75 MAD per hour
Last revision of data: 2024-01-06Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 14,745 USD
Estimated Monthly Salary: 1,229 USD
Estimated Weekly Salary: 284 USD per week
Estimated Hourly Salary: 7 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Morocco is a country located in North Africa. It has a population of approximately 36 million people and covers an area of about 446,550 square kilometers. The country is known for its diverse landscapes, including the Atlas Mountains, Sahara Desert, and coastal regions.
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Morocco.
Comparison shows that a person working as Metrology Calibration Technician in Morocco earns on average:
1.08 times the average salary (or 108% of average salary).
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in Morocco.
Comparison shows that a person working as Metrology Calibration Technician in Morocco earns on average:
1.08 times the average salary (or 108% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 178,553 MAD and 235,365 MAD. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in Morocco?
Living in Morocco the approximate monthly expenses are: 600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 162,321 MAD
Estimated Monthly Salary: 13,527 MAD
Estimated Weekly Salary: 3,122 MAD per week
Estimated Hourly Salary: 78 MAD per hour
By working as Metrology Calibration Technician a person can save up to 629 USD per month or 7,545 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Algeria, Western Sahara, Spain. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Algeria is 13,717 USD
Spain is 31,211 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Morocco
(1,720,305 MAD per year, pre-tax.)
2. Cardiologist
(1,434,963 MAD per year, pre-tax.)
(1,385,679 MAD per year, pre-tax.)
4. Neurosurgeon
(1,340,476 MAD per year, pre-tax.)
(1,339,746 MAD per year, pre-tax.)
(1,312,948 MAD per year, pre-tax.)
(1,311,162 MAD per year, pre-tax.)
(1,309,794 MAD per year, pre-tax.)
9. Urologist
(1,309,746 MAD per year, pre-tax.)
(1,308,087 MAD per year, pre-tax.)
Data as of 2025Random salary:
Radiation engineer (182,905 MAD per year, pre-tax.)
Office support specialist (76,873 MAD per year, pre-tax.)
Kitchen lead (71,940 MAD per year, pre-tax.)
Quality control supervisor (food beverage) (141,000 MAD per year, pre-tax.)
Digital analyst (206,814 MAD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=morocco&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-morocco-2025.jpg' alt='metrology calibration technician salary in morocco 2025' title='metrology calibration technician salary in morocco 2025' /></a>
Please note:This website presents salary insights for informational purposes exclusively.
This website aggregates salary data for reference use only. We strive to provide reliable figures, but cannot assure their precision. Users are urged to check alternative sources before making employment decisions. Salary ranges may vary due to company policies, market demands, and skills. We assume no responsibility for inconsistencies in the salary information provided. Your engagement with this site indicates agreement of this disclaimer.
By visiting this website, you acknowledge that salary details are subject to change.