Home > Salary > Morocco > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 128,443 MAD
Estimated Monthly Salary: 10,704 MAD
Estimated Weekly Salary: 2,470 MAD per week
Estimated Hourly Salary: 62 MAD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 10,342 MAD
Estimated Weekly Salary: 2,387 MAD per week
Estimated Hourly Salary: 60 MAD per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 11,703 USD
Estimated Monthly Salary: 975 USD
Estimated Weekly Salary: 225 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 128,443 MAD
Estimated Monthly Salary: 10,704 MAD
Estimated Weekly Salary: 2,470 MAD per week
Estimated Hourly Salary: 62 MAD per hour
By working as Lathe Operator Numerical Control a person can save up to 375 USD per month or 4,503 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Hotline support clerk (91,718 MAD per year, pre-tax.)
Nutrition services manager (202,634 MAD per year, pre-tax.)
Erp functional analyst (160,500 MAD per year, pre-tax.)
Senior clinical research associate (cra) (249,175 MAD per year, pre-tax.)
Head of home health (189,530 MAD per year, pre-tax.)
Lathe Operator Numerical Control salary in Morocco
Average Yearly Salary of Lathe Operator Numerical Control in Morocco is approximately 128,443 MAD (11,703 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 128,443 MAD
Estimated Monthly Salary: 10,704 MAD
Estimated Weekly Salary: 2,470 MAD per week
Estimated Hourly Salary: 62 MAD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 124,102 MADEstimated Monthly Salary: 10,342 MAD
Estimated Weekly Salary: 2,387 MAD per week
Estimated Hourly Salary: 60 MAD per hour
Last revision of data: 2024-01-09Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 11,703 USD
Estimated Monthly Salary: 975 USD
Estimated Weekly Salary: 225 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Morocco is a country located in North Africa. It has a population of approximately 36 million people and covers an area of about 446,550 square kilometers. The country is known for its diverse landscapes, including the Atlas Mountains, Sahara Desert, and coastal regions.
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Morocco.
Comparison shows that a person working as Lathe Operator Numerical Control in Morocco earns on average:
0.86 times the average salary (or 86% of average salary).
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Morocco.
Comparison shows that a person working as Lathe Operator Numerical Control in Morocco earns on average:
0.86 times the average salary (or 86% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 141,287 MAD and 186,242 MAD. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Morocco?
Living in Morocco the approximate monthly expenses are: 600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 128,443 MAD
Estimated Monthly Salary: 10,704 MAD
Estimated Weekly Salary: 2,470 MAD per week
Estimated Hourly Salary: 62 MAD per hour
By working as Lathe Operator Numerical Control a person can save up to 375 USD per month or 4,503 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Algeria, Western Sahara, Spain. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Algeria is 10,869 USD
Spain is 24,756 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Morocco
(1,720,305 MAD per year, pre-tax.)
2. Cardiologist
(1,434,963 MAD per year, pre-tax.)
(1,385,679 MAD per year, pre-tax.)
4. Neurosurgeon
(1,340,476 MAD per year, pre-tax.)
(1,339,746 MAD per year, pre-tax.)
(1,312,948 MAD per year, pre-tax.)
(1,311,162 MAD per year, pre-tax.)
(1,309,794 MAD per year, pre-tax.)
9. Urologist
(1,309,746 MAD per year, pre-tax.)
(1,308,087 MAD per year, pre-tax.)
Data as of 2025Random salary:
Hotline support clerk (91,718 MAD per year, pre-tax.)
Nutrition services manager (202,634 MAD per year, pre-tax.)
Erp functional analyst (160,500 MAD per year, pre-tax.)
Senior clinical research associate (cra) (249,175 MAD per year, pre-tax.)
Head of home health (189,530 MAD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=morocco&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-morocco-2025.jpg' alt='lathe operator numerical control salary in morocco 2025' title='lathe operator numerical control salary in morocco 2025' /></a>
Please note:The salary data presented here are intended for reference purposes solely.
All salary data on optisalary.com are for informational use exclusively. We compile data from numerous reliable sources, yet cannot ensure complete precision. Before making financial choices, visitors should consult external authoritative sources. Salaries change due to various influences, including negotiation skills, industry demand, and experience levels. We deny any liability for errors in the salary estimates provided here. Your engagement with optisalary.com constitutes acceptance of this disclaimer.
optisalary.com provides salary figures exclusively for informational purposes. While we endeavor for correctness, we do not ensure the validity of all figures. Users must double-check salary details with reliable sources before making financial plans. Salary estimates can fluctuate based on multiple elements, such as company size, negotiation tactics, and industry demand. We accept no responsibility for misinterpretations in the salary estimates provided. By using optisalary.com, you acknowledge that salary data is not absolute.