Home > Salary > Morocco > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 208,473 MAD
Estimated Monthly Salary: 17,373 MAD
Estimated Weekly Salary: 4,009 MAD per week
Estimated Hourly Salary: 100 MAD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 16,786 MAD
Estimated Weekly Salary: 3,874 MAD per week
Estimated Hourly Salary: 97 MAD per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 19,003 USD
Estimated Monthly Salary: 1,584 USD
Estimated Weekly Salary: 365 USD per week
Estimated Hourly Salary: 9 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 208,473 MAD
Estimated Monthly Salary: 17,373 MAD
Estimated Weekly Salary: 4,009 MAD per week
Estimated Hourly Salary: 100 MAD per hour
By working as Injection Molding Engineer a person can save up to 984 USD per month or 11,803 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Mortgage originator (132,000 MAD per year, pre-tax.)
Facilities maintenance mechanic (163,669 MAD per year, pre-tax.)
Executive producer television productions (284,213 MAD per year, pre-tax.)
Rf design engineer (262,581 MAD per year, pre-tax.)
Dental assistant (certified) (118,701 MAD per year, pre-tax.)
Injection Molding Engineer salary in Morocco
Average Yearly Salary of Injection Molding Engineer in Morocco is approximately 208,473 MAD (19,003 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 208,473 MAD
Estimated Monthly Salary: 17,373 MAD
Estimated Weekly Salary: 4,009 MAD per week
Estimated Hourly Salary: 100 MAD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 201,432 MADEstimated Monthly Salary: 16,786 MAD
Estimated Weekly Salary: 3,874 MAD per week
Estimated Hourly Salary: 97 MAD per hour
Last revision of data: 2024-01-05Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 19,003 USD
Estimated Monthly Salary: 1,584 USD
Estimated Weekly Salary: 365 USD per week
Estimated Hourly Salary: 9 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Morocco is a country located in North Africa. It has a population of approximately 36 million people and covers an area of about 446,550 square kilometers. The country is known for its diverse landscapes, including the Atlas Mountains, Sahara Desert, and coastal regions.
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Morocco.
Comparison shows that a person working as Injection Molding Engineer in Morocco earns on average:
1.39 times the average salary (or 139% of average salary).
Estimated national average yearly salary is 150,000 MAD (15,000 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Morocco.
Comparison shows that a person working as Injection Molding Engineer in Morocco earns on average:
1.39 times the average salary (or 139% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 229,320 MAD and 302,286 MAD. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Morocco?
Living in Morocco the approximate monthly expenses are: 600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 208,473 MAD
Estimated Monthly Salary: 17,373 MAD
Estimated Weekly Salary: 4,009 MAD per week
Estimated Hourly Salary: 100 MAD per hour
By working as Injection Molding Engineer a person can save up to 984 USD per month or 11,803 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Morocco, see costs of living in Morocco.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Algeria, Western Sahara, Spain. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Algeria is 17,732 USD
Spain is 40,003 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Morocco
(1,720,305 MAD per year, pre-tax.)
2. Cardiologist
(1,434,963 MAD per year, pre-tax.)
(1,385,679 MAD per year, pre-tax.)
4. Neurosurgeon
(1,340,476 MAD per year, pre-tax.)
(1,339,746 MAD per year, pre-tax.)
(1,312,948 MAD per year, pre-tax.)
(1,311,162 MAD per year, pre-tax.)
(1,309,794 MAD per year, pre-tax.)
9. Urologist
(1,309,746 MAD per year, pre-tax.)
(1,308,087 MAD per year, pre-tax.)
Data as of 2025Random salary:
Mortgage originator (132,000 MAD per year, pre-tax.)
Facilities maintenance mechanic (163,669 MAD per year, pre-tax.)
Executive producer television productions (284,213 MAD per year, pre-tax.)
Rf design engineer (262,581 MAD per year, pre-tax.)
Dental assistant (certified) (118,701 MAD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=morocco&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-morocco-2025.jpg' alt='injection molding engineer salary in morocco 2025' title='injection molding engineer salary in morocco 2025' /></a>
Please note:The salary figures presented here are intended for informational purposes only.
Salary details presented on optisalary.com are intended for reference use only. Our data comes from multiple sources and may not necessarily be accurate. Users should cross-reference salary information through other means before making employment commitments. The figures listed here may change due to factors such as company policies, experience levels, and demand shifts. We cannot guarantee that the information provided is flawless. By using optisalary.com, you agree that salary information is presented 'as is' and without warranties.
This website aggregates salary data for reference purposes only. We attempt to provide accurate figures, but cannot guarantee their precision. Users are encouraged to check alternative sources before making employment choices. Salary ranges may fluctuate due to geographic location, experience, and industry trends. We assume no responsibility for inconsistencies in the salary information provided. Your continued use with this site indicates understanding of this disclaimer.