Home > Salary > Mexico > Wafer Fabrication Operator
A wafer fabrication operator is responsible for operating and maintaining the equipment used in the production of semiconductor wafers. They work in cleanroom environments and follow strict safety protocols to ensure the quality and efficiency of the fabrication process. Their main tasks include setting up and calibrating machines, monitoring production processes, conducting regular inspections, troubleshooting equipment issues, and performing routine maintenance.
This occupation requires strong attention to detail, technical skills, and the ability to work in a fast-paced and highly controlled environment. Wafer fabrication operators must have knowledge of semiconductor manufacturing processes, equipment operation, and quality control procedures. They should be able to interpret technical specifications and use various tools and instruments to measure and test the wafers.
Estimated Yearly Salary: 256,728 MXN
Estimated Monthly Salary: 21,394 MXN
Estimated Weekly Salary: 4,937 MXN per week
Estimated Hourly Salary: 123 MXN per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 20,735 MXN
Estimated Weekly Salary: 4,785 MXN per week
Estimated Hourly Salary: 120 MXN per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 12,920 USD
Estimated Monthly Salary: 1,077 USD
Estimated Weekly Salary: 248 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 256,728 MXN
Estimated Monthly Salary: 21,394 MXN
Estimated Weekly Salary: 4,937 MXN per week
Estimated Hourly Salary: 123 MXN per hour
By working as Wafer Fabrication Operator a person can save up to 340 USD per month or 4,083 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Mexico, see costs of living in Mexico.
Estimated Yearly Salary for Wafer Fabrication Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Dance studio manager (250,063 MXN per year, pre-tax.)
Cnc programmer (264,921 MXN per year, pre-tax.)
Dispensing audiologist (532,279 MXN per year, pre-tax.)
Miner (245,782 MXN per year, pre-tax.)
Industrial engineer (516,850 MXN per year, pre-tax.)
Wafer Fabrication Operator salary in Mexico
Average Yearly Salary of Wafer Fabrication Operator in Mexico is approximately 256,728 MXN (12,920 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Wafer Fabrication Operator do?
A wafer fabrication operator is responsible for operating and maintaining the equipment used in the production of semiconductor wafers. They work in cleanroom environments and follow strict safety protocols to ensure the quality and efficiency of the fabrication process. Their main tasks include setting up and calibrating machines, monitoring production processes, conducting regular inspections, troubleshooting equipment issues, and performing routine maintenance.
This occupation requires strong attention to detail, technical skills, and the ability to work in a fast-paced and highly controlled environment. Wafer fabrication operators must have knowledge of semiconductor manufacturing processes, equipment operation, and quality control procedures. They should be able to interpret technical specifications and use various tools and instruments to measure and test the wafers.
Skills: Wafer fabrication, Semiconductor manufacturing, Equipment operation, Cleanroom environment, Quality control, Technical skills.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Wafer Fabrication Operator make?
Salary details
How much does Wafer Fabrication Operator make?Estimated Yearly Salary: 256,728 MXN
Estimated Monthly Salary: 21,394 MXN
Estimated Weekly Salary: 4,937 MXN per week
Estimated Hourly Salary: 123 MXN per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 248,820 MXNEstimated Monthly Salary: 20,735 MXN
Estimated Weekly Salary: 4,785 MXN per week
Estimated Hourly Salary: 120 MXN per hour
Last revision of data: 2024-01-09Wafer Fabrication Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 12,920 USD
Estimated Monthly Salary: 1,077 USD
Estimated Weekly Salary: 248 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Mexico, located in North America, is a vibrant country known for its rich culture and diverse landscapes. With a population of approximately 126 million people, it is the 11th most populous country in the world. Covering an area of about 1,964,375 square kilometers, Mexico is the 14th largest country globally.
Estimated national average yearly salary is 331,152 MXN (18,410 USD). Value indicated is pre-tax. Below graph shows estimated Wafer Fabrication Operator job salary compared to average salary in Mexico.
Comparison shows that a person working as Wafer Fabrication Operator in Mexico earns on average:
0.78 times the average salary (or 78% of average salary).
Estimated national average yearly salary is 331,152 MXN (18,410 USD). Value indicated is pre-tax. Below graph shows estimated Wafer Fabrication Operator job salary compared to average salary in Mexico.
Comparison shows that a person working as Wafer Fabrication Operator in Mexico earns on average:
0.78 times the average salary (or 78% of average salary).
Is Wafer Fabrication Operator a well paid job?
No, our data shows that Wafer Fabrication Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Wafer Fabrication Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Wafer Fabrication Operator?
High salary for Wafer Fabrication Operator would be somewhere between 282,401 MXN and 372,256 MXN. However this is an estimation based on Gaussian Distribution.How much can you save working as Wafer Fabrication Operator in Mexico?
Living in Mexico the approximate monthly expenses are: 736 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 256,728 MXN
Estimated Monthly Salary: 21,394 MXN
Estimated Weekly Salary: 4,937 MXN per week
Estimated Hourly Salary: 123 MXN per hour
By working as Wafer Fabrication Operator a person can save up to 340 USD per month or 4,083 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Mexico, see costs of living in Mexico.
Salary comparison to region and neighbouring coutries
Country's neighbours are: United States, Belize, Guatemala. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Wafer Fabrication Operator
United States is 40,023 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Mexico
(3,848,140 MXN per year, pre-tax.)
2. Cardiologist
(3,207,036 MXN per year, pre-tax.)
(3,089,000 MXN per year, pre-tax.)
(2,995,691 MXN per year, pre-tax.)
5. Neurosurgeon
(2,986,217 MXN per year, pre-tax.)
6. Urologist
(2,929,358 MXN per year, pre-tax.)
(2,929,338 MXN per year, pre-tax.)
8. Oncologist
(2,923,408 MXN per year, pre-tax.)
(2,918,043 MXN per year, pre-tax.)
(2,917,105 MXN per year, pre-tax.)
Data as of 2025Random salary:
Dance studio manager (250,063 MXN per year, pre-tax.)
Cnc programmer (264,921 MXN per year, pre-tax.)
Dispensing audiologist (532,279 MXN per year, pre-tax.)
Miner (245,782 MXN per year, pre-tax.)
Industrial engineer (516,850 MXN per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=mexico&job=wafer-fabrication-operator'><img src='https://optisalary.com/wp-content/graphs/salary/wafer-fabrication-operator-salary-in-mexico-2025.jpg' alt='wafer fabrication operator salary in mexico 2025' title='wafer fabrication operator salary in mexico 2025' /></a>
Please note:optisalary.com aggregates salary data for reference purposes only.
Salary details presented on this website are meant for informational purposes exclusively. Our data comes from multiple sources and may not always be accurate. Users should cross-reference salary information independently before making employment commitments. The figures shown here may fluctuate due to variables such as company policies, experience levels, and demand shifts. We cannot guarantee that the data displayed is error-free. By using this website, you agree that salary information is offered 'as is' and without assurances.
Salary data displayed on this site is for reference only. Our figures are compiled various sources, but we cannot guarantee absolute correctness. Users should always verify salary details with official platforms before making financial decisions. Salaries differ due to economic trends, job location, and negotiation skills. We make no warranties about the completeness of the provided salary data. By continuing to use this site, you acknowledge these limitations.