Home > Salary > Lebanon > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 105,642,705 LBP
Estimated Monthly Salary: 8,803,559 LBP
Estimated Weekly Salary: 2,031,590 LBP per week
Estimated Hourly Salary: 50,790 LBP per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 8,504,725 LBP
Estimated Weekly Salary: 1,962,629 LBP per week
Estimated Hourly Salary: 49,066 LBP per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 6,456 USD
Estimated Monthly Salary: 538 USD
Estimated Weekly Salary: 124 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 105,642,705 LBP
Estimated Monthly Salary: 8,803,559 LBP
Estimated Weekly Salary: 2,031,590 LBP per week
Estimated Hourly Salary: 50,790 LBP per hour
By working as Mechanical Calibration Technician a person can save up to 206 USD per month or 2,472 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Lebanon, see costs of living in Lebanon.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Air quality specialist (139,440,000 LBP per year, pre-tax.)
Strategic planning specialist (141,930,000 LBP per year, pre-tax.)
Gastroenterology technician (68,205,084 LBP per year, pre-tax.)
Fleet manager trucking transportation (126,509,430 LBP per year, pre-tax.)
Jewelry consultant (59,170,650 LBP per year, pre-tax.)
Mechanical Calibration Technician salary in Lebanon
Average Yearly Salary of Mechanical Calibration Technician in Lebanon is approximately 105,642,705 LBP (6,456 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 105,642,705 LBP
Estimated Monthly Salary: 8,803,559 LBP
Estimated Weekly Salary: 2,031,590 LBP per week
Estimated Hourly Salary: 50,790 LBP per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 102,056,700 LBPEstimated Monthly Salary: 8,504,725 LBP
Estimated Weekly Salary: 1,962,629 LBP per week
Estimated Hourly Salary: 49,066 LBP per hour
Last revision of data: 2024-01-05Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 6,456 USD
Estimated Monthly Salary: 538 USD
Estimated Weekly Salary: 124 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Lebanon is a small country located in the Middle East on the eastern shore of the Mediterranean Sea. It has a diverse population of approximately 6 million people. The country covers an area of around 10,452 square kilometers, making it one of the smallest countries in the region.
Estimated national average yearly salary is 124,500,000 LBP (8,300 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Lebanon.
Comparison shows that a person working as Mechanical Calibration Technician in Lebanon earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 124,500,000 LBP (8,300 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Lebanon.
Comparison shows that a person working as Mechanical Calibration Technician in Lebanon earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 116,206,976 LBP and 153,181,922 LBP. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Lebanon?
Living in Lebanon the approximate monthly expenses are: 332 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 105,642,705 LBP
Estimated Monthly Salary: 8,803,559 LBP
Estimated Weekly Salary: 2,031,590 LBP per week
Estimated Hourly Salary: 50,790 LBP per hour
By working as Mechanical Calibration Technician a person can save up to 206 USD per month or 2,472 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Lebanon, see costs of living in Lebanon.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Syria, Israel, Cyprus, Jordan. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Syria is 2,861 USD
Israel is 42,444 USD
Jordan is 7,369 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Lebanon
(1,417,299,855 LBP per year, pre-tax.)
2. Cardiologist
(1,175,197,006 LBP per year, pre-tax.)
(1,136,102,693 LBP per year, pre-tax.)
4. Neurosurgeon
(1,108,071,776 LBP per year, pre-tax.)
(1,103,346,164 LBP per year, pre-tax.)
6. Urologist
(1,079,234,675 LBP per year, pre-tax.)
(1,078,809,332 LBP per year, pre-tax.)
(1,078,388,733 LBP per year, pre-tax.)
(1,074,144,669 LBP per year, pre-tax.)
(1,072,787,021 LBP per year, pre-tax.)
Data as of 2025Random salary:
Air quality specialist (139,440,000 LBP per year, pre-tax.)
Strategic planning specialist (141,930,000 LBP per year, pre-tax.)
Gastroenterology technician (68,205,084 LBP per year, pre-tax.)
Fleet manager trucking transportation (126,509,430 LBP per year, pre-tax.)
Jewelry consultant (59,170,650 LBP per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=lebanon&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-lebanon-2025.jpg' alt='mechanical calibration technician salary in lebanon 2025' title='mechanical calibration technician salary in lebanon 2025' /></a>
Please note:The salary figures presented here are meant for reference purposes only.
optisalary.com presents salary data for informational use exclusively. We attempt to provide reliable figures, but do not assure their precision. Users are urged to check official platforms before making employment decisions. Salary ranges can vary due to geographic location, experience, and industry trends. We accept no liability for inconsistencies in the salary information provided. Your engagement with this site indicates understanding of this policy.
Salary details presented on this website are intended for informational use only. Our data comes from multiple inputs and may not necessarily be accurate. Users must verify salary information through other means before making employment commitments. The figures shown here may fluctuate due to variables such as company policies, experience levels, and demand shifts. We do not warrant that the data displayed is error-free. By using this website, you agree that salary information is offered 'as is' and without warranties.