Home > Salary > Kuwait > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 31,147 KWD
Estimated Monthly Salary: 2,596 KWD
Estimated Weekly Salary: 599 KWD per week
Estimated Hourly Salary: 15 KWD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 2,507 KWD
Estimated Weekly Salary: 579 KWD per week
Estimated Hourly Salary: 14 KWD per hour
Last revision of data: 2024-02-08
Estimated Yearly Salary: 10,463 USD
Estimated Monthly Salary: 872 USD
Estimated Weekly Salary: 201 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 31,147 KWD
Estimated Monthly Salary: 2,596 KWD
Estimated Weekly Salary: 599 KWD per week
Estimated Hourly Salary: 15 KWD per hour
Our data indicates that by working as Mechanical Calibration Technician you will not be able to save much money and will likely need to make adjustments to your lifestyle to go comfortably through the month.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kuwait, see costs of living in Kuwait.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Forging machine setter operator tender metal and plastic (24,845 KWD per year, pre-tax.)
Php developer (41,860 KWD per year, pre-tax.)
Medical records coordinator (26,114 KWD per year, pre-tax.)
Administrative manager (45,344 KWD per year, pre-tax.)
Refractive surgery coordinator (22,568 KWD per year, pre-tax.)
Mechanical Calibration Technician salary in Kuwait
Average Yearly Salary of Mechanical Calibration Technician in Kuwait is approximately 31,147 KWD (10,463 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 31,147 KWD
Estimated Monthly Salary: 2,596 KWD
Estimated Weekly Salary: 599 KWD per week
Estimated Hourly Salary: 15 KWD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 30,084 KWDEstimated Monthly Salary: 2,507 KWD
Estimated Weekly Salary: 579 KWD per week
Estimated Hourly Salary: 14 KWD per hour
Last revision of data: 2024-02-08Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 10,463 USD
Estimated Monthly Salary: 872 USD
Estimated Weekly Salary: 201 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Kuwait is a small country located in the Middle East. It has a population of approximately 4 million people and covers an area of around 17,818 square kilometers. The country is bordered by Saudi Arabia to the south and Iraq to the north.
Estimated national average yearly salary is 12,300 KWD (40,000 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Kuwait.
Comparison shows that a person working as Mechanical Calibration Technician in Kuwait earns on average:
2.53 times the average salary (or 253% of average salary).
Estimated national average yearly salary is 12,300 KWD (40,000 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Kuwait.
Comparison shows that a person working as Mechanical Calibration Technician in Kuwait earns on average:
2.53 times the average salary (or 253% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is a very well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 34,262 KWD and 45,163 KWD. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Kuwait?
Living in Kuwait the approximate monthly expenses are: 1,600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 31,147 KWD
Estimated Monthly Salary: 2,596 KWD
Estimated Weekly Salary: 599 KWD per week
Estimated Hourly Salary: 15 KWD per hour
Our data indicates that by working as Mechanical Calibration Technician you will not be able to save much money and will likely need to make adjustments to your lifestyle to go comfortably through the month.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kuwait, see costs of living in Kuwait.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Saudi Arabia, Iraq. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Saudi Arabia is 21,515 USD
Iraq is 4,677 USD
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Kuwait
(419,012 KWD per year, pre-tax.)
2. Cardiologist
(348,639 KWD per year, pre-tax.)
(336,866 KWD per year, pre-tax.)
4. Neurosurgeon
(324,311 KWD per year, pre-tax.)
(324,112 KWD per year, pre-tax.)
(317,580 KWD per year, pre-tax.)
(317,445 KWD per year, pre-tax.)
(317,318 KWD per year, pre-tax.)
9. Urologist
(317,161 KWD per year, pre-tax.)
10. Plastic surgeon
(316,850 KWD per year, pre-tax.)
Data as of 2025Random salary:
Forging machine setter operator tender metal and plastic (24,845 KWD per year, pre-tax.)
Php developer (41,860 KWD per year, pre-tax.)
Medical records coordinator (26,114 KWD per year, pre-tax.)
Administrative manager (45,344 KWD per year, pre-tax.)
Refractive surgery coordinator (22,568 KWD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=kuwait&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-kuwait-2025.jpg' alt='mechanical calibration technician salary in kuwait 2025' title='mechanical calibration technician salary in kuwait 2025' /></a>
Please note:This website offers salary insights for educational purposes exclusively.
Salary details displayed on this website are intended for informational use exclusively. Our data is sourced through various inputs and may not necessarily be accurate. Users must cross-reference salary information through other means before making employment decisions. The figures listed here may change due to variables such as company policies, experience levels, and demand shifts. We cannot guarantee that the information displayed is error-free. By accessing this website, you agree that salary information is offered 'as is' and without warranties.
The salary figures on optisalary.com are meant for reference use exclusively. We compile salary data from multiple providers, but cannot guarantee absolute accuracy. Users must independently verify salaries before making financial decisions. Salary variations occur due to company policies, negotiation skills, and experience levels. We disclaim any warranty regarding the validity of the listed salary data. By using this site, you acknowledge that salary data is subject to updates.