Home > Salary > Kuwait > Cnc Press Brake Operator
A CNC press brake operator is responsible for operating and maintaining computer numerical control (CNC) machines used in metal fabrication. They are skilled in interpreting blueprints, setting up machines, and programming the CNC software to accurately bend and shape metal sheets. The operator ensures that the machine is properly aligned and the tools are correctly positioned to achieve the desired specifications. They monitor the machine during operation, making adjustments as necessary to maintain quality and efficiency. Additionally, they inspect finished products for accuracy, perform routine maintenance on the machine, and troubleshoot any issues that may arise.
Estimated Yearly Salary: 24,788 KWD
Estimated Monthly Salary: 2,066 KWD
Estimated Weekly Salary: 477 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 1,998 KWD
Estimated Weekly Salary: 461 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Last revision of data: 2024-02-05
Estimated Yearly Salary: 8,314 USD
Estimated Monthly Salary: 693 USD
Estimated Weekly Salary: 160 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 24,788 KWD
Estimated Monthly Salary: 2,066 KWD
Estimated Weekly Salary: 477 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Our data indicates that by working as Cnc Press Brake Operator you will not be able to save much money and will likely need to make adjustments to your lifestyle to go comfortably through the month.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kuwait, see costs of living in Kuwait.
Estimated Yearly Salary for Cnc Press Brake Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Network draftsman (60,478 KWD per year, pre-tax.)
Park ranger (25,116 KWD per year, pre-tax.)
Assistant professor of physics (44,708 KWD per year, pre-tax.)
Junior architectural designer (36,624 KWD per year, pre-tax.)
Quality assurance supervisor call centers (28,756 KWD per year, pre-tax.)
Cnc Press Brake Operator salary in Kuwait
Average Yearly Salary of Cnc Press Brake Operator in Kuwait is approximately 24,788 KWD (8,314 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Press Brake Operator do?
A CNC press brake operator is responsible for operating and maintaining computer numerical control (CNC) machines used in metal fabrication. They are skilled in interpreting blueprints, setting up machines, and programming the CNC software to accurately bend and shape metal sheets. The operator ensures that the machine is properly aligned and the tools are correctly positioned to achieve the desired specifications. They monitor the machine during operation, making adjustments as necessary to maintain quality and efficiency. Additionally, they inspect finished products for accuracy, perform routine maintenance on the machine, and troubleshoot any issues that may arise.
Skills: CNC press brake operator, metal fabrication, CNC machines, blueprint interpretation, machine setup, CNC software programming.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Press Brake Operator make?
Salary details
How much does Cnc Press Brake Operator make?Estimated Yearly Salary: 24,788 KWD
Estimated Monthly Salary: 2,066 KWD
Estimated Weekly Salary: 477 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 23,980 KWDEstimated Monthly Salary: 1,998 KWD
Estimated Weekly Salary: 461 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Last revision of data: 2024-02-05Cnc Press Brake Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 8,314 USD
Estimated Monthly Salary: 693 USD
Estimated Weekly Salary: 160 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Kuwait is a small country located in the Middle East. It has a population of approximately 4 million people and covers an area of around 17,818 square kilometers. The country is bordered by Saudi Arabia to the south and Iraq to the north.
Estimated national average yearly salary is 12,300 KWD (40,000 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Press Brake Operator job salary compared to average salary in Kuwait.
Comparison shows that a person working as Cnc Press Brake Operator in Kuwait earns on average:
2.02 times the average salary (or 202% of average salary).
Estimated national average yearly salary is 12,300 KWD (40,000 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Press Brake Operator job salary compared to average salary in Kuwait.
Comparison shows that a person working as Cnc Press Brake Operator in Kuwait earns on average:
2.02 times the average salary (or 202% of average salary).
Is Cnc Press Brake Operator a well paid job?
Yes, our data show that Cnc Press Brake Operator is a very well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Cnc Press Brake Operator?
High salary for Cnc Press Brake Operator would be somewhere between 27,267 KWD and 35,943 KWD. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Press Brake Operator in Kuwait?
Living in Kuwait the approximate monthly expenses are: 1,600 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 24,788 KWD
Estimated Monthly Salary: 2,066 KWD
Estimated Weekly Salary: 477 KWD per week
Estimated Hourly Salary: 12 KWD per hour
Our data indicates that by working as Cnc Press Brake Operator you will not be able to save much money and will likely need to make adjustments to your lifestyle to go comfortably through the month.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kuwait, see costs of living in Kuwait.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Saudi Arabia, Iraq. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Press Brake Operator
Saudi Arabia is 17,103 USD
Iraq is 3,732 USD
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Kuwait
(419,012 KWD per year, pre-tax.)
2. Cardiologist
(348,639 KWD per year, pre-tax.)
(336,866 KWD per year, pre-tax.)
4. Neurosurgeon
(324,311 KWD per year, pre-tax.)
(324,112 KWD per year, pre-tax.)
(317,580 KWD per year, pre-tax.)
(317,445 KWD per year, pre-tax.)
(317,318 KWD per year, pre-tax.)
9. Urologist
(317,161 KWD per year, pre-tax.)
10. Plastic surgeon
(316,850 KWD per year, pre-tax.)
Data as of 2025Random salary:
Network draftsman (60,478 KWD per year, pre-tax.)
Park ranger (25,116 KWD per year, pre-tax.)
Assistant professor of physics (44,708 KWD per year, pre-tax.)
Junior architectural designer (36,624 KWD per year, pre-tax.)
Quality assurance supervisor call centers (28,756 KWD per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=kuwait&job=cnc-press-brake-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-press-brake-operator-salary-in-kuwait-2025.jpg' alt='cnc press brake operator salary in kuwait 2025' title='cnc press brake operator salary in kuwait 2025' /></a>
Please note:optisalary.com presents salary data for reference use exclusively.
optisalary.com displays salary data exclusively for reference use. While we endeavor for accuracy, we cannot ensure the precision of all figures. Users should double-check salary details with official sources before making financial decisions. Salary estimates may vary based on numerous elements, such as geographic location, experience, and job role. We accept no responsibility for errors in the salary estimates provided. By using this website, you accept that salary data is not absolute.
optisalary.com compiles salary information for reference purposes only. While we strive to present correct figures, we do not ensure their absolute reliability. Users are highly advised to check with other sources before finalizing career-related plans. Salary amounts fluctuate based on several conditions, such as location, job role, and individual qualifications. We do not offer any claims as to the correctness of the provided data. Your access of this site indicates agreement of this disclaimer.