Home > Salary > Kenya > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 1,201,881 KES
Estimated Monthly Salary: 100,157 KES
Estimated Weekly Salary: 23,113 KES per week
Estimated Hourly Salary: 578 KES per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 96,446 KES
Estimated Weekly Salary: 22,257 KES per week
Estimated Hourly Salary: 556 KES per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 7,556 USD
Estimated Monthly Salary: 630 USD
Estimated Weekly Salary: 145 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 1,201,881 KES
Estimated Monthly Salary: 100,157 KES
Estimated Weekly Salary: 23,113 KES per week
Estimated Hourly Salary: 578 KES per hour
By working as Injection Molding Engineer a person can save up to 390 USD per month or 4,676 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kenya, see costs of living in Kenya.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Art consultant (899,020 KES per year, pre-tax.)
Technical sales director (1,904,249 KES per year, pre-tax.)
Coordinator accounting (1,041,395 KES per year, pre-tax.)
Tissue donation specialist (809,646 KES per year, pre-tax.)
Floral manager (568,326 KES per year, pre-tax.)
Injection Molding Engineer salary in Kenya
Average Yearly Salary of Injection Molding Engineer in Kenya is approximately 1,201,881 KES (7,556 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 1,201,881 KES
Estimated Monthly Salary: 100,157 KES
Estimated Weekly Salary: 23,113 KES per week
Estimated Hourly Salary: 578 KES per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 1,157,350 KESEstimated Monthly Salary: 96,446 KES
Estimated Weekly Salary: 22,257 KES per week
Estimated Hourly Salary: 556 KES per hour
Last revision of data: 2024-01-07Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 7,556 USD
Estimated Monthly Salary: 630 USD
Estimated Weekly Salary: 145 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Kenya is a country located in East Africa. It has a diverse population of approximately 53 million people. The land area of Kenya is around 580,367 square kilometers, making it the 48th largest country in the world. It is bordered by Ethiopia to the north, Somalia to the northeast, Tanzania to the south, Uganda to the west, and South Sudan to the northwest.
Estimated national average yearly salary is 869,520 KES (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Kenya.
Comparison shows that a person working as Injection Molding Engineer in Kenya earns on average:
1.38 times the average salary (or 138% of average salary).
Estimated national average yearly salary is 869,520 KES (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Kenya.
Comparison shows that a person working as Injection Molding Engineer in Kenya earns on average:
1.38 times the average salary (or 138% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 1,322,069 KES and 1,742,727 KES. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Kenya?
Living in Kenya the approximate monthly expenses are: 240 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 1,201,881 KES
Estimated Monthly Salary: 100,157 KES
Estimated Weekly Salary: 23,113 KES per week
Estimated Hourly Salary: 578 KES per hour
By working as Injection Molding Engineer a person can save up to 390 USD per month or 4,676 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Kenya, see costs of living in Kenya.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Ethiopia, Somalia, South Sudan, Tanzania, Uganda.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Ethiopia is 2,419 USD
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Kenya
(9,866,711 KES per year, pre-tax.)
2. Cardiologist
(8,249,858 KES per year, pre-tax.)
(7,939,285 KES per year, pre-tax.)
4. Neurosurgeon
(7,706,816 KES per year, pre-tax.)
(7,676,980 KES per year, pre-tax.)
(7,545,448 KES per year, pre-tax.)
(7,519,239 KES per year, pre-tax.)
8. Urologist
(7,514,557 KES per year, pre-tax.)
9. Oncologist
(7,503,914 KES per year, pre-tax.)
(7,503,863 KES per year, pre-tax.)
Data as of 2025Random salary:
Art consultant (899,020 KES per year, pre-tax.)
Technical sales director (1,904,249 KES per year, pre-tax.)
Coordinator accounting (1,041,395 KES per year, pre-tax.)
Tissue donation specialist (809,646 KES per year, pre-tax.)
Floral manager (568,326 KES per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=kenya&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-kenya-2025.jpg' alt='injection molding engineer salary in kenya 2025' title='injection molding engineer salary in kenya 2025' /></a>
Please note:The salary estimates on this website are meant for reference purposes exclusively.
Salary information displayed on this site is informational only. Our figures come from various sources, but we cannot guarantee absolute correctness. Users should always double-check salary details with additional resources before making job-related commitments. Salaries fluctuate due to economic trends, job location, and negotiation skills. We make no assurances about the validity of the provided salary data. By continuing to use this site, you agree these limitations.
Salary details presented on this website are intended for informational purposes exclusively. Our data comes from multiple inputs and may not always be up to date. Users should cross-reference salary information independently before making employment commitments. The figures shown here may fluctuate due to variables such as location, industry standards, and individual skill sets. We do not warrant that the information provided is flawless. By accessing this website, you accept that salary information is offered 'as is' and without warranties.