Home > Salary > Indonesia > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 135,765,359 IDR
Estimated Monthly Salary: 11,313,780 IDR
Estimated Weekly Salary: 2,610,872 IDR per week
Estimated Hourly Salary: 65,272 IDR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 10,950,158 IDR
Estimated Weekly Salary: 2,526,960 IDR per week
Estimated Hourly Salary: 63,174 IDR per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 8,243 USD
Estimated Monthly Salary: 687 USD
Estimated Weekly Salary: 159 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 135,765,359 IDR
Estimated Monthly Salary: 11,313,780 IDR
Estimated Weekly Salary: 2,610,872 IDR per week
Estimated Hourly Salary: 65,272 IDR per hour
By working as Mechanical Calibration Technician a person can save up to 264 USD per month or 3,165 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Crm support specialist (158,681,100 IDR per year, pre-tax.)
Costume designer (100,223,216 IDR per year, pre-tax.)
Silk finisher (62,314,344 IDR per year, pre-tax.)
Banking assistant manager (114,722,648 IDR per year, pre-tax.)
Case management assistant (121,760,744 IDR per year, pre-tax.)
Mechanical Calibration Technician salary in Indonesia
Average Yearly Salary of Mechanical Calibration Technician in Indonesia is approximately 135,765,359 IDR (8,243 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 135,765,359 IDR
Estimated Monthly Salary: 11,313,780 IDR
Estimated Weekly Salary: 2,610,872 IDR per week
Estimated Hourly Salary: 65,272 IDR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 131,401,898 IDREstimated Monthly Salary: 10,950,158 IDR
Estimated Weekly Salary: 2,526,960 IDR per week
Estimated Hourly Salary: 63,174 IDR per hour
Last revision of data: 2024-01-02Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 8,243 USD
Estimated Monthly Salary: 687 USD
Estimated Weekly Salary: 159 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Indonesia, located in Southeast Asia, is the world's largest archipelago consisting of more than 17,000 islands. With a population of over 270 million people, it is the fourth most populous country globally. The nation spans approximately 1.9 million square kilometers, making it the 14th largest country by land area.
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Indonesia.
Comparison shows that a person working as Mechanical Calibration Technician in Indonesia earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Indonesia.
Comparison shows that a person working as Mechanical Calibration Technician in Indonesia earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 149,341,895 IDR and 196,859,771 IDR. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Indonesia?
Living in Indonesia the approximate monthly expenses are: 423 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 135,765,359 IDR
Estimated Monthly Salary: 11,313,780 IDR
Estimated Weekly Salary: 2,610,872 IDR per week
Estimated Hourly Salary: 65,272 IDR per hour
By working as Mechanical Calibration Technician a person can save up to 264 USD per month or 3,165 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Malaysia, Papua New Guinea, East Timor. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Malaysia is 13,809 USD
East Timor is 35,111 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Indonesia
(1,825,698,192 IDR per year, pre-tax.)
2. Cardiologist
(1,516,604,457 IDR per year, pre-tax.)
(1,461,048,780 IDR per year, pre-tax.)
4. Neurosurgeon
(1,421,992,567 IDR per year, pre-tax.)
(1,415,761,811 IDR per year, pre-tax.)
(1,390,462,773 IDR per year, pre-tax.)
(1,387,366,201 IDR per year, pre-tax.)
(1,385,685,106 IDR per year, pre-tax.)
9. Oncologist
(1,385,109,120 IDR per year, pre-tax.)
10. Plastic surgeon
(1,383,933,123 IDR per year, pre-tax.)
Data as of 2025Random salary:
Crm support specialist (158,681,100 IDR per year, pre-tax.)
Costume designer (100,223,216 IDR per year, pre-tax.)
Silk finisher (62,314,344 IDR per year, pre-tax.)
Banking assistant manager (114,722,648 IDR per year, pre-tax.)
Case management assistant (121,760,744 IDR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=indonesia&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-indonesia-2025.jpg' alt='mechanical calibration technician salary in indonesia 2025' title='mechanical calibration technician salary in indonesia 2025' /></a>
Please note:This website offers salary estimates for educational purposes exclusively.
optisalary.com presents salary data for reference purposes exclusively. We strive to provide reliable figures, but do not guarantee their validity. Users are urged to consult alternative platforms before making employment decisions. Salary amounts may fluctuate due to geographic location, experience, and industry trends. We accept no liability for inconsistencies in the salary data provided. Your continued use with this site indicates agreement of this policy.
Salary details displayed on optisalary.com are intended for reference purposes exclusively. Our data comes from various inputs and may not necessarily be accurate. Users must verify salary information independently before making employment commitments. The figures listed here may change due to variables such as company policies, experience levels, and demand shifts. We do not guarantee that the data provided is flawless. By using optisalary.com, you agree that salary information is presented 'as is' and without warranties.