Home > Salary > Indonesia > Fab Technician
A fab technician, short for fabrication technician, is responsible for operating and maintaining machinery used in the manufacturing process. They work in a fabrication facility or factory, where they play a crucial role in producing various products. Their main duties include setting up and calibrating equipment, monitoring production processes, troubleshooting issues, conducting quality control checks, and ensuring the overall efficiency of the fabrication process.
This occupation requires a strong understanding of technical specifications, attention to detail, and the ability to follow strict safety protocols. Fab technicians must also possess good problem-solving skills and be able to work well under pressure. They may work in a variety of industries, such as electronics, automotive, aerospace, or pharmaceuticals.
Estimated Yearly Salary: 144,098,330 IDR
Estimated Monthly Salary: 12,008,194 IDR
Estimated Weekly Salary: 2,771,122 IDR per week
Estimated Hourly Salary: 69,278 IDR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 11,585,947 IDR
Estimated Weekly Salary: 2,673,680 IDR per week
Estimated Hourly Salary: 66,842 IDR per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 8,717 USD
Estimated Monthly Salary: 726 USD
Estimated Weekly Salary: 168 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 144,098,330 IDR
Estimated Monthly Salary: 12,008,194 IDR
Estimated Weekly Salary: 2,771,122 IDR per week
Estimated Hourly Salary: 69,278 IDR per hour
By working as Fab Technician a person can save up to 303 USD per month or 3,639 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Estimated Yearly Salary for Fab Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Pawnbroker (56,651,837 IDR per year, pre-tax.)
Gemologist (167,584,072 IDR per year, pre-tax.)
Paid search associate (134,638,050 IDR per year, pre-tax.)
Geothermal technician (223,952,320 IDR per year, pre-tax.)
Rf application engineer (283,760,062 IDR per year, pre-tax.)
Fab Technician salary in Indonesia
Average Yearly Salary of Fab Technician in Indonesia is approximately 144,098,330 IDR (8,717 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Fab Technician do?
A fab technician, short for fabrication technician, is responsible for operating and maintaining machinery used in the manufacturing process. They work in a fabrication facility or factory, where they play a crucial role in producing various products. Their main duties include setting up and calibrating equipment, monitoring production processes, troubleshooting issues, conducting quality control checks, and ensuring the overall efficiency of the fabrication process.
This occupation requires a strong understanding of technical specifications, attention to detail, and the ability to follow strict safety protocols. Fab technicians must also possess good problem-solving skills and be able to work well under pressure. They may work in a variety of industries, such as electronics, automotive, aerospace, or pharmaceuticals.
Skills: Fab technician, Fabrication technician, Manufacturing, Machinery operation, Quality control, Troubleshooting
Job industry: Manufacturing
Job industry: Manufacturing
How much does Fab Technician make?
Salary details
How much does Fab Technician make?Estimated Yearly Salary: 144,098,330 IDR
Estimated Monthly Salary: 12,008,194 IDR
Estimated Weekly Salary: 2,771,122 IDR per week
Estimated Hourly Salary: 69,278 IDR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 139,031,366 IDREstimated Monthly Salary: 11,585,947 IDR
Estimated Weekly Salary: 2,673,680 IDR per week
Estimated Hourly Salary: 66,842 IDR per hour
Last revision of data: 2024-01-03Fab Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 8,717 USD
Estimated Monthly Salary: 726 USD
Estimated Weekly Salary: 168 USD per week
Estimated Hourly Salary: 4 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Indonesia, located in Southeast Asia, is the world's largest archipelago consisting of more than 17,000 islands. With a population of over 270 million people, it is the fourth most populous country globally. The nation spans approximately 1.9 million square kilometers, making it the 14th largest country by land area.
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Fab Technician job salary compared to average salary in Indonesia.
Comparison shows that a person working as Fab Technician in Indonesia earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Fab Technician job salary compared to average salary in Indonesia.
Comparison shows that a person working as Fab Technician in Indonesia earns on average:
0.9 times the average salary (or 90% of average salary).
Is Fab Technician a well paid job?
Yes, our data show that Fab Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Fab Technician?
High salary for Fab Technician would be somewhere between 158,508,163 IDR and 208,942,579 IDR. However this is an estimation based on Gaussian Distribution.How much can you save working as Fab Technician in Indonesia?
Living in Indonesia the approximate monthly expenses are: 423 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 144,098,330 IDR
Estimated Monthly Salary: 12,008,194 IDR
Estimated Weekly Salary: 2,771,122 IDR per week
Estimated Hourly Salary: 69,278 IDR per hour
By working as Fab Technician a person can save up to 303 USD per month or 3,639 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Malaysia, Papua New Guinea, East Timor. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Fab Technician
Malaysia is 14,647 USD
East Timor is 37,031 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Indonesia
(1,825,698,192 IDR per year, pre-tax.)
2. Cardiologist
(1,516,604,457 IDR per year, pre-tax.)
(1,461,048,780 IDR per year, pre-tax.)
4. Neurosurgeon
(1,421,992,567 IDR per year, pre-tax.)
(1,415,761,811 IDR per year, pre-tax.)
(1,390,462,773 IDR per year, pre-tax.)
(1,387,366,201 IDR per year, pre-tax.)
(1,385,685,106 IDR per year, pre-tax.)
9. Oncologist
(1,385,109,120 IDR per year, pre-tax.)
10. Plastic surgeon
(1,383,933,123 IDR per year, pre-tax.)
Data as of 2025Random salary:
Pawnbroker (56,651,837 IDR per year, pre-tax.)
Gemologist (167,584,072 IDR per year, pre-tax.)
Paid search associate (134,638,050 IDR per year, pre-tax.)
Geothermal technician (223,952,320 IDR per year, pre-tax.)
Rf application engineer (283,760,062 IDR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=indonesia&job=fab-technician'><img src='https://optisalary.com/wp-content/graphs/salary/fab-technician-salary-in-indonesia-2025.jpg' alt='fab technician salary in indonesia 2025' title='fab technician salary in indonesia 2025' /></a>
Please note:This website offers salary estimates for educational purposes only.
The salary data on this site is designed for informational purposes exclusively. We provide salary insights derived from multiple sources, but cannot guarantee absolute precision. Users should consistently verify salary details with other reliable sources before making career-related choices. Variations in salary figures may occur due to various circumstances, including location, experience, and industry. We do not extend any warranty regarding the entirety of the provided salary information. Use of this website constitutes acknowledgment of these terms.
optisalary.com presents salary data for reference purposes exclusively. We strive to provide accurate figures, but cannot guarantee their precision. Users are encouraged to check alternative platforms before making employment decisions. Salary amounts may vary due to company policies, market demands, and skills. We assume no responsibility for errors in the salary data provided. Your continued use with this site indicates understanding of this policy.