Home > Salary > Indonesia > Cnc Service Engineer
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Estimated Yearly Salary: 165,518,511 IDR
Estimated Monthly Salary: 13,793,209 IDR
Estimated Weekly Salary: 3,183,048 IDR per week
Estimated Hourly Salary: 79,576 IDR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 13,330,927 IDR
Estimated Weekly Salary: 3,076,368 IDR per week
Estimated Hourly Salary: 76,909 IDR per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 10,022 USD
Estimated Monthly Salary: 835 USD
Estimated Weekly Salary: 193 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 165,518,511 IDR
Estimated Monthly Salary: 13,793,209 IDR
Estimated Weekly Salary: 3,183,048 IDR per week
Estimated Hourly Salary: 79,576 IDR per hour
By working as Cnc Service Engineer a person can save up to 412 USD per month or 4,944 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Estimated Yearly Salary for Cnc Service Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
University chair (232,335,466 IDR per year, pre-tax.)
Hospice nursing admissions coordinator (224,271,324 IDR per year, pre-tax.)
Investment principal (349,330,518 IDR per year, pre-tax.)
Health safety manager (241,864,044 IDR per year, pre-tax.)
Coordinate measuring machine (cmm), operator (99,384,000 IDR per year, pre-tax.)
Cnc Service Engineer salary in Indonesia
Average Yearly Salary of Cnc Service Engineer in Indonesia is approximately 165,518,511 IDR (10,022 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Service Engineer do?
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Skills: CNC service engineer, maintenance, repair, troubleshooting, CNC machines, mechanical engineering
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Service Engineer make?
Salary details
How much does Cnc Service Engineer make?Estimated Yearly Salary: 165,518,511 IDR
Estimated Monthly Salary: 13,793,209 IDR
Estimated Weekly Salary: 3,183,048 IDR per week
Estimated Hourly Salary: 79,576 IDR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 159,971,118 IDREstimated Monthly Salary: 13,330,927 IDR
Estimated Weekly Salary: 3,076,368 IDR per week
Estimated Hourly Salary: 76,909 IDR per hour
Last revision of data: 2024-01-07Cnc Service Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 10,022 USD
Estimated Monthly Salary: 835 USD
Estimated Weekly Salary: 193 USD per week
Estimated Hourly Salary: 5 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Indonesia, located in Southeast Asia, is the world's largest archipelago consisting of more than 17,000 islands. With a population of over 270 million people, it is the fourth most populous country globally. The nation spans approximately 1.9 million square kilometers, making it the 14th largest country by land area.
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Indonesia.
Comparison shows that a person working as Cnc Service Engineer in Indonesia earns on average:
1.03 times the average salary (or 103% of average salary).
Estimated national average yearly salary is 160,287,000 IDR (10,580 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Indonesia.
Comparison shows that a person working as Cnc Service Engineer in Indonesia earns on average:
1.03 times the average salary (or 103% of average salary).
Is Cnc Service Engineer a well paid job?
Yes, our data show that Cnc Service Engineer is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Cnc Service Engineer?
High salary for Cnc Service Engineer would be somewhere between 182,070,362 IDR and 240,001,841 IDR. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Service Engineer in Indonesia?
Living in Indonesia the approximate monthly expenses are: 423 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 165,518,511 IDR
Estimated Monthly Salary: 13,793,209 IDR
Estimated Weekly Salary: 3,183,048 IDR per week
Estimated Hourly Salary: 79,576 IDR per hour
By working as Cnc Service Engineer a person can save up to 412 USD per month or 4,944 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Indonesia, see costs of living in Indonesia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Malaysia, Papua New Guinea, East Timor. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Service Engineer
Malaysia is 16,856 USD
East Timor is 42,590 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Indonesia
(1,825,698,192 IDR per year, pre-tax.)
2. Cardiologist
(1,516,604,457 IDR per year, pre-tax.)
(1,461,048,780 IDR per year, pre-tax.)
4. Neurosurgeon
(1,421,992,567 IDR per year, pre-tax.)
(1,415,761,811 IDR per year, pre-tax.)
(1,390,462,773 IDR per year, pre-tax.)
(1,387,366,201 IDR per year, pre-tax.)
(1,385,685,106 IDR per year, pre-tax.)
9. Oncologist
(1,385,109,120 IDR per year, pre-tax.)
10. Plastic surgeon
(1,383,933,123 IDR per year, pre-tax.)
Data as of 2025Random salary:
University chair (232,335,466 IDR per year, pre-tax.)
Hospice nursing admissions coordinator (224,271,324 IDR per year, pre-tax.)
Investment principal (349,330,518 IDR per year, pre-tax.)
Health safety manager (241,864,044 IDR per year, pre-tax.)
Coordinate measuring machine (cmm), operator (99,384,000 IDR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=indonesia&job=cnc-service-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-service-engineer-salary-in-indonesia-2025.jpg' alt='cnc service engineer salary in indonesia 2025' title='cnc service engineer salary in indonesia 2025' /></a>
Please note:optisalary.com presents salary data for informational purposes only.
Salary information displayed on this site is informational only. Our figures come from various sources, but we do not guarantee their accuracy. Users must always double-check salary details with official platforms before making financial decisions. Salaries differ due to economic trends, job location, and negotiation skills. We cannot offer any warranties about the completeness of the provided salary data. By navigating this site, you acknowledge these terms.
Salary data displayed on this site is informational only. Our figures come from various inputs, but we do not guarantee absolute correctness. Users should always verify salary details with additional platforms before making financial commitments. Salaries fluctuate due to economic trends, job location, and negotiation skills. We cannot offer any assurances about the completeness of the provided salary data. By continuing to use this site, you acknowledge these limitations.