Home > Salary > Ghana > Machine Shop Tool Die
A machine shop supervisor in production is responsible for overseeing the day-to-day operations of a machine shop, ensuring that production targets are met, and maintaining quality standards. They coordinate and schedule work assignments, monitor workflow, and ensure that machines are properly maintained and operated. This role involves supervising a team of machinists and technicians, providing guidance and training as needed. The machine shop supervisor also collaborates with other departments to optimize production processes, implement safety protocols, and resolve any issues that may arise. They must possess strong leadership skills, technical knowledge of machining operations, and the ability to troubleshoot and problem-solve effectively. Attention to detail, organizational skills, and the ability to prioritize tasks are essential in this role.
Estimated Yearly Salary: 32,706 GHS
Estimated Monthly Salary: 2,726 GHS
Estimated Weekly Salary: 629 GHS per week
Estimated Hourly Salary: 16 GHS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 2,632 GHS
Estimated Weekly Salary: 607 GHS per week
Estimated Hourly Salary: 15 GHS per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 2,734 USD
Estimated Monthly Salary: 228 USD
Estimated Weekly Salary: 53 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 32,706 GHS
Estimated Monthly Salary: 2,726 GHS
Estimated Weekly Salary: 629 GHS per week
Estimated Hourly Salary: 16 GHS per hour
By working as Machine Shop Tool Die a person can save up to 88 USD per month or 1,054 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Estimated Yearly Salary for Machine Shop Tool Die
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Civil engineering technician (27,710 GHS per year, pre-tax.)
Om specialist (51,352 GHS per year, pre-tax.)
Underwater welder (39,833 GHS per year, pre-tax.)
Junior account manager (27,363 GHS per year, pre-tax.)
Assistant accountant (28,380 GHS per year, pre-tax.)
Machine Shop Tool Die salary in Ghana
Average Yearly Salary of Machine Shop Tool Die in Ghana is approximately 32,706 GHS (2,734 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Machine Shop Tool Die do?
A machine shop supervisor in production is responsible for overseeing the day-to-day operations of a machine shop, ensuring that production targets are met, and maintaining quality standards. They coordinate and schedule work assignments, monitor workflow, and ensure that machines are properly maintained and operated. This role involves supervising a team of machinists and technicians, providing guidance and training as needed. The machine shop supervisor also collaborates with other departments to optimize production processes, implement safety protocols, and resolve any issues that may arise. They must possess strong leadership skills, technical knowledge of machining operations, and the ability to troubleshoot and problem-solve effectively. Attention to detail, organizational skills, and the ability to prioritize tasks are essential in this role.
Skills: machine shop supervisor, production, manufacturing, machining operations, leadership skills, quality control
Job industry: Manufacturing
Job industry: Manufacturing
How much does Machine Shop Tool Die make?
Salary details
How much does Machine Shop Tool Die make?Estimated Yearly Salary: 32,706 GHS
Estimated Monthly Salary: 2,726 GHS
Estimated Weekly Salary: 629 GHS per week
Estimated Hourly Salary: 16 GHS per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 31,584 GHSEstimated Monthly Salary: 2,632 GHS
Estimated Weekly Salary: 607 GHS per week
Estimated Hourly Salary: 15 GHS per hour
Last revision of data: 2024-01-06Machine Shop Tool Die estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,734 USD
Estimated Monthly Salary: 228 USD
Estimated Weekly Salary: 53 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ghana is a country located in West Africa. It has a population of approximately 31 million people and covers an area of about 238,535 square kilometers. The country is bordered by Cote d'Ivoire to the west, Burkina Faso to the north, Togo to the east, and the Atlantic Ocean to the south.
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Machine Shop Tool Die job salary compared to average salary in Ghana.
Comparison shows that a person working as Machine Shop Tool Die in Ghana earns on average:
0.83 times the average salary (or 83% of average salary).
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Machine Shop Tool Die job salary compared to average salary in Ghana.
Comparison shows that a person working as Machine Shop Tool Die in Ghana earns on average:
0.83 times the average salary (or 83% of average salary).
Is Machine Shop Tool Die a well paid job?
Yes, our data show that Machine Shop Tool Die is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Machine Shop Tool Die?
High salary for Machine Shop Tool Die would be somewhere between 35,977 GHS and 47,424 GHS. However this is an estimation based on Gaussian Distribution.How much can you save working as Machine Shop Tool Die in Ghana?
Living in Ghana the approximate monthly expenses are: 140 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 32,706 GHS
Estimated Monthly Salary: 2,726 GHS
Estimated Weekly Salary: 629 GHS per week
Estimated Hourly Salary: 16 GHS per hour
By working as Machine Shop Tool Die a person can save up to 88 USD per month or 1,054 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Burkina Faso, Cote d'Ivoire (Ivory Coast), Togo.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Machine Shop Tool Die
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ghana
(439,471 GHS per year, pre-tax.)
2. Cardiologist
(363,775 GHS per year, pre-tax.)
(351,690 GHS per year, pre-tax.)
(342,308 GHS per year, pre-tax.)
5. Neurosurgeon
(342,198 GHS per year, pre-tax.)
(334,060 GHS per year, pre-tax.)
7. Urologist
(333,287 GHS per year, pre-tax.)
(333,209 GHS per year, pre-tax.)
(333,002 GHS per year, pre-tax.)
10. Oncologist
(332,700 GHS per year, pre-tax.)
Data as of 2025Random salary:
Civil engineering technician (27,710 GHS per year, pre-tax.)
Om specialist (51,352 GHS per year, pre-tax.)
Underwater welder (39,833 GHS per year, pre-tax.)
Junior account manager (27,363 GHS per year, pre-tax.)
Assistant accountant (28,380 GHS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ghana&job=machine-shop-tool-die'><img src='https://optisalary.com/wp-content/graphs/salary/machine-shop-tool-die-salary-in-ghana-2025.jpg' alt='machine shop tool die salary in ghana 2025' title='machine shop tool die salary in ghana 2025' /></a>
Please note:This website presents salary data for reference use exclusively.
The salary estimates on optisalary.com are meant for reference use only. We collect salary data from multiple providers, but cannot guarantee complete accuracy. Users must on their own confirm salaries before making financial commitments. Salary variations occur due to industry standards, demand shifts, and location. We disclaim any warranty regarding the correctness of the provided salary data. By using this site, you agree that salary data is not definitive.
Salary details displayed on optisalary.com are meant for informational use only. Our data is sourced through multiple sources and may not always be accurate. Users should verify salary information independently before making financial commitments. The figures shown here may fluctuate due to variables such as location, industry standards, and individual skill sets. We cannot warrant that the information displayed is error-free. By using optisalary.com, you accept that salary information is presented 'as is' and without warranties.