Home > Salary > Ghana > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 32,630 GHS
Estimated Monthly Salary: 2,719 GHS
Estimated Weekly Salary: 628 GHS per week
Estimated Hourly Salary: 16 GHS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 2,632 GHS
Estimated Weekly Salary: 607 GHS per week
Estimated Hourly Salary: 15 GHS per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 2,729 USD
Estimated Monthly Salary: 227 USD
Estimated Weekly Salary: 52 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 32,630 GHS
Estimated Monthly Salary: 2,719 GHS
Estimated Weekly Salary: 628 GHS per week
Estimated Hourly Salary: 16 GHS per hour
By working as Lathe Operator Numerical Control a person can save up to 87 USD per month or 1,049 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Associate account manager (41,194 GHS per year, pre-tax.)
Plumbing supervisor (48,528 GHS per year, pre-tax.)
Occupational therapist manager (63,180 GHS per year, pre-tax.)
Web application analyst (58,558 GHS per year, pre-tax.)
Coast guard captain small boats (27,710 GHS per year, pre-tax.)
Lathe Operator Numerical Control salary in Ghana
Average Yearly Salary of Lathe Operator Numerical Control in Ghana is approximately 32,630 GHS (2,729 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 32,630 GHS
Estimated Monthly Salary: 2,719 GHS
Estimated Weekly Salary: 628 GHS per week
Estimated Hourly Salary: 16 GHS per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 31,584 GHSEstimated Monthly Salary: 2,632 GHS
Estimated Weekly Salary: 607 GHS per week
Estimated Hourly Salary: 15 GHS per hour
Last revision of data: 2024-01-07Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,729 USD
Estimated Monthly Salary: 227 USD
Estimated Weekly Salary: 52 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ghana is a country located in West Africa. It has a population of approximately 31 million people and covers an area of about 238,535 square kilometers. The country is bordered by Cote d'Ivoire to the west, Burkina Faso to the north, Togo to the east, and the Atlantic Ocean to the south.
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Ghana.
Comparison shows that a person working as Lathe Operator Numerical Control in Ghana earns on average:
0.83 times the average salary (or 83% of average salary).
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Ghana.
Comparison shows that a person working as Lathe Operator Numerical Control in Ghana earns on average:
0.83 times the average salary (or 83% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 35,893 GHS and 47,314 GHS. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Ghana?
Living in Ghana the approximate monthly expenses are: 140 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 32,630 GHS
Estimated Monthly Salary: 2,719 GHS
Estimated Weekly Salary: 628 GHS per week
Estimated Hourly Salary: 16 GHS per hour
By working as Lathe Operator Numerical Control a person can save up to 87 USD per month or 1,049 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Burkina Faso, Cote d'Ivoire (Ivory Coast), Togo.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ghana
(439,471 GHS per year, pre-tax.)
2. Cardiologist
(363,775 GHS per year, pre-tax.)
(351,690 GHS per year, pre-tax.)
(342,308 GHS per year, pre-tax.)
5. Neurosurgeon
(342,198 GHS per year, pre-tax.)
(334,060 GHS per year, pre-tax.)
7. Urologist
(333,287 GHS per year, pre-tax.)
(333,209 GHS per year, pre-tax.)
(333,002 GHS per year, pre-tax.)
10. Oncologist
(332,700 GHS per year, pre-tax.)
Data as of 2025Random salary:
Associate account manager (41,194 GHS per year, pre-tax.)
Plumbing supervisor (48,528 GHS per year, pre-tax.)
Occupational therapist manager (63,180 GHS per year, pre-tax.)
Web application analyst (58,558 GHS per year, pre-tax.)
Coast guard captain small boats (27,710 GHS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ghana&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-ghana-2025.jpg' alt='lathe operator numerical control salary in ghana 2025' title='lathe operator numerical control salary in ghana 2025' /></a>
Please note:The salary figures presented here are intended for informational purposes only.
optisalary.com displays salary data exclusively for reference use. While we endeavor for accuracy, we cannot guarantee the validity of all figures. Users should double-check salary details with official organizations before making financial plans. Salary amounts may vary based on multiple elements, such as company size, negotiation tactics, and industry demand. We accept no liability for misinterpretations in the pay figures provided. By accessing this website, you acknowledge that salary data is not absolute.
This website presents salary data for informational purposes exclusively. We strive to provide accurate figures, but do not assure their precision. Users are urged to check alternative platforms before making employment choices. Salary ranges may fluctuate due to geographic location, experience, and industry trends. We accept no responsibility for errors in the salary data provided. Your engagement with this site confirms agreement of this policy.