Home > Salary > Ghana > Fabrication Engineer
A fabrication engineer is responsible for designing, developing, and overseeing the production of various components and structures. They work in industries such as manufacturing, construction, aerospace, and automotive, where they use their technical expertise to create efficient and reliable products. The occupation requires a strong understanding of engineering principles, materials, and manufacturing processes.
Fabrication engineers collaborate with cross-functional teams to analyze project requirements, create design specifications, and develop prototypes. They utilize computer-aided design (CAD) software to create detailed models and blueprints, ensuring accuracy and adherence to industry standards. Additionally, fabrication engineers conduct feasibility studies, perform cost analysis, and optimize production processes to maximize efficiency.
Estimated Yearly Salary: 48,197 GHS
Estimated Monthly Salary: 4,016 GHS
Estimated Weekly Salary: 927 GHS per week
Estimated Hourly Salary: 23 GHS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,891 GHS
Estimated Weekly Salary: 898 GHS per week
Estimated Hourly Salary: 22 GHS per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 4,041 USD
Estimated Monthly Salary: 337 USD
Estimated Weekly Salary: 78 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 48,197 GHS
Estimated Monthly Salary: 4,016 GHS
Estimated Weekly Salary: 927 GHS per week
Estimated Hourly Salary: 23 GHS per hour
By working as Fabrication Engineer a person can save up to 197 USD per month or 2,361 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Estimated Yearly Salary for Fabrication Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Early head start home visitor (23,352 GHS per year, pre-tax.)
Assistant winemaker (43,944 GHS per year, pre-tax.)
Equal employment opportunity (eeo), officer (47,799 GHS per year, pre-tax.)
Qa lead engineer (77,224 GHS per year, pre-tax.)
Sales representative industrial product (46,369 GHS per year, pre-tax.)
Fabrication Engineer salary in Ghana
Average Yearly Salary of Fabrication Engineer in Ghana is approximately 48,197 GHS (4,041 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Fabrication Engineer do?

Skills: Fabrication Engineer, Manufacturing, Design, Engineering, CAD, Prototyping
Job industry: Manufacturing
Job industry: Manufacturing
How much does Fabrication Engineer make?
Salary details
How much does Fabrication Engineer make?Estimated Yearly Salary: 48,197 GHS
Estimated Monthly Salary: 4,016 GHS
Estimated Weekly Salary: 927 GHS per week
Estimated Hourly Salary: 23 GHS per hour
Comparing salary to last year:
Estimated Yearly Salary: 46,692 GHSEstimated Monthly Salary: 3,891 GHS
Estimated Weekly Salary: 898 GHS per week
Estimated Hourly Salary: 22 GHS per hour
Fabrication Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 4,041 USD
Estimated Monthly Salary: 337 USD
Estimated Weekly Salary: 78 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ghana is a country located in West Africa. It has a population of approximately 31 million people and covers an area of about 238,535 square kilometers. The country is bordered by Cote d'Ivoire to the west, Burkina Faso to the north, Togo to the east, and the Atlantic Ocean to the south.
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Fabrication Engineer job salary compared to average salary in Ghana.
Comparison shows that a person working as Fabrication Engineer in Ghana earns on average:
1.23 times the average salary (or 123% of average salary).
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Fabrication Engineer job salary compared to average salary in Ghana.
Comparison shows that a person working as Fabrication Engineer in Ghana earns on average:
1.23 times the average salary (or 123% of average salary).
Is Fabrication Engineer a well paid job?
Yes, our data shows that Fabrication Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Fabrication Engineer?
High salary for Fabrication Engineer would be somewhere between 53,017 GHS and 69,886 GHS. However this is an estimation based on Gaussian Distribution.How much can you save working as Fabrication Engineer in Ghana?
Living in Ghana the approximate monthly expenses are: 140 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 48,197 GHS
Estimated Monthly Salary: 4,016 GHS
Estimated Weekly Salary: 927 GHS per week
Estimated Hourly Salary: 23 GHS per hour
By working as Fabrication Engineer a person can save up to 197 USD per month or 2,361 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Burkina Faso, Cote d'Ivoire (Ivory Coast), Togo.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Fabrication Engineer
Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
- 6 to 10 years of experience yields
- 11 to 15 years of experience yields
- 16 to 25 years of experience yields
- more than 25 years of experience yields
Top 10 highest salaries in Ghana
(439,471 GHS per year, pre-tax.)
2. Cardiologist
(363,775 GHS per year, pre-tax.)
(351,690 GHS per year, pre-tax.)
(342,308 GHS per year, pre-tax.)
5. Neurosurgeon
(342,198 GHS per year, pre-tax.)
(334,060 GHS per year, pre-tax.)
7. Urologist
(333,287 GHS per year, pre-tax.)
(333,209 GHS per year, pre-tax.)
(333,002 GHS per year, pre-tax.)
10. Oncologist
(332,700 GHS per year, pre-tax.)
Random salary:
Early head start home visitor (23,352 GHS per year, pre-tax.)
Assistant winemaker (43,944 GHS per year, pre-tax.)
Equal employment opportunity (eeo), officer (47,799 GHS per year, pre-tax.)
Qa lead engineer (77,224 GHS per year, pre-tax.)
Sales representative industrial product (46,369 GHS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.

Salary information displayed on this site is for reference exclusively.
Salary details displayed on optisalary.com are intended for informational use only. Our data comes from multiple inputs and may not always be accurate. Users must cross-reference salary information independently before making financial commitments. The figures listed here may fluctuate due to factors such as location, industry standards, and individual skill sets. We do not warrant that the data provided is error-free. By using optisalary.com, you agree that salary information is presented 'as is' and without assurances.
This website presents salary insights for educational purposes exclusively. While we gather data from multiple sources, we do not ensure absolute reliability. Users are advised to review trusted organizations before making major financial moves. Salaries shift due to various factors, such as experience, industry trends, and negotiation tactics. We make no warranty regarding the validity of the displayed salary figures. Your continued access of this site confirms your acceptance of these terms.