Home > Salary > Ghana > Cutter Operator
A cutter operator is responsible for operating cutting machinery to cut materials such as fabric, paper, or metal into specific shapes and sizes. They work in various industries such as manufacturing, printing, textiles, and construction. The primary duties of a cutter operator include setting up and adjusting cutting machines, ensuring the correct measurements and specifications are met, loading materials onto the machine, monitoring the cutting process, and performing routine maintenance on the equipment.
This occupation requires strong attention to detail, technical skills, and the ability to interpret blueprints or design specifications. Cutter operators must have good hand-eye coordination, physical stamina, and the ability to work independently or as part of a team. They should also possess problem-solving skills to troubleshoot any issues that may arise during the cutting process.
Estimated Yearly Salary: 29,449 GHS
Estimated Monthly Salary: 2,454 GHS
Estimated Weekly Salary: 566 GHS per week
Estimated Hourly Salary: 14 GHS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 2,365 GHS
Estimated Weekly Salary: 546 GHS per week
Estimated Hourly Salary: 14 GHS per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 2,457 USD
Estimated Monthly Salary: 205 USD
Estimated Weekly Salary: 47 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 29,449 GHS
Estimated Monthly Salary: 2,454 GHS
Estimated Weekly Salary: 566 GHS per week
Estimated Hourly Salary: 14 GHS per hour
By working as Cutter Operator a person can save up to 65 USD per month or 777 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Estimated Yearly Salary for Cutter Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Jewelry repairer (17,665 GHS per year, pre-tax.)
Financial quantitative analyst (66,248 GHS per year, pre-tax.)
Medical equipment driver (26,012 GHS per year, pre-tax.)
Senior trust officer (80,112 GHS per year, pre-tax.)
Veterans service representative (31,752 GHS per year, pre-tax.)
Cutter Operator salary in Ghana
Average Yearly Salary of Cutter Operator in Ghana is approximately 29,449 GHS (2,457 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cutter Operator do?
A cutter operator is responsible for operating cutting machinery to cut materials such as fabric, paper, or metal into specific shapes and sizes. They work in various industries such as manufacturing, printing, textiles, and construction. The primary duties of a cutter operator include setting up and adjusting cutting machines, ensuring the correct measurements and specifications are met, loading materials onto the machine, monitoring the cutting process, and performing routine maintenance on the equipment.
This occupation requires strong attention to detail, technical skills, and the ability to interpret blueprints or design specifications. Cutter operators must have good hand-eye coordination, physical stamina, and the ability to work independently or as part of a team. They should also possess problem-solving skills to troubleshoot any issues that may arise during the cutting process.
Skills: Cutter operator, Cutting machinery, Material cutting, Manufacturing, Textiles, Construction.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cutter Operator make?
Salary details
How much does Cutter Operator make?Estimated Yearly Salary: 29,449 GHS
Estimated Monthly Salary: 2,454 GHS
Estimated Weekly Salary: 566 GHS per week
Estimated Hourly Salary: 14 GHS per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 28,380 GHSEstimated Monthly Salary: 2,365 GHS
Estimated Weekly Salary: 546 GHS per week
Estimated Hourly Salary: 14 GHS per hour
Last revision of data: 2024-01-02Cutter Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,457 USD
Estimated Monthly Salary: 205 USD
Estimated Weekly Salary: 47 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ghana is a country located in West Africa. It has a population of approximately 31 million people and covers an area of about 238,535 square kilometers. The country is bordered by Cote d'Ivoire to the west, Burkina Faso to the north, Togo to the east, and the Atlantic Ocean to the south.
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Cutter Operator job salary compared to average salary in Ghana.
Comparison shows that a person working as Cutter Operator in Ghana earns on average:
0.75 times the average salary (or 75% of average salary).
Estimated national average yearly salary is 39,200 GHS (3,500 USD). Value indicated is pre-tax. Below graph shows estimated Cutter Operator job salary compared to average salary in Ghana.
Comparison shows that a person working as Cutter Operator in Ghana earns on average:
0.75 times the average salary (or 75% of average salary).
Is Cutter Operator a well paid job?
No, our data shows that Cutter Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Cutter Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Cutter Operator?
High salary for Cutter Operator would be somewhere between 32,394 GHS and 42,701 GHS. However this is an estimation based on Gaussian Distribution.How much can you save working as Cutter Operator in Ghana?
Living in Ghana the approximate monthly expenses are: 140 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 29,449 GHS
Estimated Monthly Salary: 2,454 GHS
Estimated Weekly Salary: 566 GHS per week
Estimated Hourly Salary: 14 GHS per hour
By working as Cutter Operator a person can save up to 65 USD per month or 777 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ghana, see costs of living in Ghana.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Burkina Faso, Cote d'Ivoire (Ivory Coast), Togo.. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cutter Operator
Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ghana
(439,471 GHS per year, pre-tax.)
2. Cardiologist
(363,775 GHS per year, pre-tax.)
(351,690 GHS per year, pre-tax.)
(342,308 GHS per year, pre-tax.)
5. Neurosurgeon
(342,198 GHS per year, pre-tax.)
(334,060 GHS per year, pre-tax.)
7. Urologist
(333,287 GHS per year, pre-tax.)
(333,209 GHS per year, pre-tax.)
(333,002 GHS per year, pre-tax.)
10. Oncologist
(332,700 GHS per year, pre-tax.)
Data as of 2025Random salary:
Jewelry repairer (17,665 GHS per year, pre-tax.)
Financial quantitative analyst (66,248 GHS per year, pre-tax.)
Medical equipment driver (26,012 GHS per year, pre-tax.)
Senior trust officer (80,112 GHS per year, pre-tax.)
Veterans service representative (31,752 GHS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ghana&job=cutter-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cutter-operator-salary-in-ghana-2025.jpg' alt='cutter operator salary in ghana 2025' title='cutter operator salary in ghana 2025' /></a>
Please note:The salary estimates on optisalary.com are meant for informational use only.
Salary details presented on this website are intended for reference purposes only. Our data comes from multiple sources and may not necessarily be accurate. Users should verify salary information through other means before making financial commitments. The figures shown here may fluctuate due to variables such as location, industry standards, and individual skill sets. We cannot warrant that the information provided is flawless. By accessing this website, you accept that salary information is offered 'as is' and without assurances.
Salary details presented on optisalary.com are intended for informational purposes exclusively. Our data comes from various inputs and may not always be accurate. Users should verify salary information through other means before making financial decisions. The figures shown here may fluctuate due to variables such as company policies, experience levels, and demand shifts. We cannot guarantee that the data provided is flawless. By accessing optisalary.com, you agree that salary information is offered 'as is' and without warranties.