Home > Salary > Germany > Process Control Technician
A process control technician is responsible for monitoring and maintaining the control systems used in manufacturing and industrial processes. They ensure that these systems are functioning properly, optimizing production efficiency and minimizing downtime. Their duties include troubleshooting equipment, performing routine maintenance, calibrating instruments, and programming control devices. They also collaborate with engineers and operators to identify and resolve any issues that may arise during the production process. A process control technician needs to have a strong understanding of control systems, electrical circuits, and instrumentation. They should be skilled in reading technical drawings, using diagnostic tools, and interpreting data. Attention to detail, problem-solving abilities, and good communication skills are essential for this role.
Estimated Yearly Salary: 43,964 EUR
Estimated Monthly Salary: 3,664 EUR
Estimated Weekly Salary: 845 EUR per week
Estimated Hourly Salary: 21 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,540 EUR
Estimated Weekly Salary: 817 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 44,101 USD
Estimated Monthly Salary: 3,675 USD
Estimated Weekly Salary: 848 USD per week
Estimated Hourly Salary: 21 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 43,964 EUR
Estimated Monthly Salary: 3,664 EUR
Estimated Weekly Salary: 845 EUR per week
Estimated Hourly Salary: 21 EUR per hour
By working as Process Control Technician a person can save up to 1,539 USD per month or 18,474 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Germany, see costs of living in Germany.
Estimated Yearly Salary for Process Control Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Manufacturing facilitator (31,339 EUR per year, pre-tax.)
Job coordinator (28,179 EUR per year, pre-tax.)
Traffic supervisor (32,066 EUR per year, pre-tax.)
Paint shop manager (73,817 EUR per year, pre-tax.)
Apprentice bricklayer (38,409 EUR per year, pre-tax.)
Process Control Technician salary in Germany
Average Yearly Salary of Process Control Technician in Germany is approximately 43,964 EUR (44,101 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Process Control Technician do?
A process control technician is responsible for monitoring and maintaining the control systems used in manufacturing and industrial processes. They ensure that these systems are functioning properly, optimizing production efficiency and minimizing downtime. Their duties include troubleshooting equipment, performing routine maintenance, calibrating instruments, and programming control devices. They also collaborate with engineers and operators to identify and resolve any issues that may arise during the production process. A process control technician needs to have a strong understanding of control systems, electrical circuits, and instrumentation. They should be skilled in reading technical drawings, using diagnostic tools, and interpreting data. Attention to detail, problem-solving abilities, and good communication skills are essential for this role.
Skills: process control, technician, manufacturing, industrial processes, control systems, troubleshooting.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Process Control Technician make?
Salary details
How much does Process Control Technician make?Estimated Yearly Salary: 43,964 EUR
Estimated Monthly Salary: 3,664 EUR
Estimated Weekly Salary: 845 EUR per week
Estimated Hourly Salary: 21 EUR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 42,482 EUREstimated Monthly Salary: 3,540 EUR
Estimated Weekly Salary: 817 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Last revision of data: 2024-01-06Process Control Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 44,101 USD
Estimated Monthly Salary: 3,675 USD
Estimated Weekly Salary: 848 USD per week
Estimated Hourly Salary: 21 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Germany, located in Central Europe, is a country known for its rich history, diverse culture, and strong economy. With a population of approximately 83 million people, it is the most populous country in the European Union. Germany covers an area of around 357,022 square kilometers, making it the seventh-largest country in Europe.
Estimated national average yearly salary is 48,585 EUR (53,390 USD). Value indicated is pre-tax. Below graph shows estimated Process Control Technician job salary compared to average salary in Germany.
Comparison shows that a person working as Process Control Technician in Germany earns on average:
0.9 times the average salary (or 90% of average salary).
Estimated national average yearly salary is 48,585 EUR (53,390 USD). Value indicated is pre-tax. Below graph shows estimated Process Control Technician job salary compared to average salary in Germany.
Comparison shows that a person working as Process Control Technician in Germany earns on average:
0.9 times the average salary (or 90% of average salary).
Is Process Control Technician a well paid job?
Yes, our data show that Process Control Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Process Control Technician?
High salary for Process Control Technician would be somewhere between 48,360 EUR and 63,748 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Process Control Technician in Germany?
Living in Germany the approximate monthly expenses are: 2,136 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 43,964 EUR
Estimated Monthly Salary: 3,664 EUR
Estimated Weekly Salary: 845 EUR per week
Estimated Hourly Salary: 21 EUR per hour
By working as Process Control Technician a person can save up to 1,539 USD per month or 18,474 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Germany, see costs of living in Germany.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Austria, Belgium, Czech Republic, Denmark, France, Luxembourg, Netherlands, Poland, Switzerland. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Process Control Technician
Austria is 46,373 USD
Belgium is 40,053 USD
Czech Republic is 21,900 USD
Denmark is 60,166 USD
France is 37,740 USD
Luxembourg is 74,881 USD
Netherlands is 47,300 USD
Poland is 15,135 USD
Switzerland is 73,734 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Germany
(555,253 EUR per year, pre-tax.)
2. Cardiologist
(462,849 EUR per year, pre-tax.)
(447,264 EUR per year, pre-tax.)
4. Neurosurgeon
(435,504 EUR per year, pre-tax.)
(435,000 EUR per year, pre-tax.)
(425,008 EUR per year, pre-tax.)
(425,006 EUR per year, pre-tax.)
(424,882 EUR per year, pre-tax.)
(423,466 EUR per year, pre-tax.)
10. Oncologist
(423,119 EUR per year, pre-tax.)
Data as of 2025Random salary:
Manufacturing facilitator (31,339 EUR per year, pre-tax.)
Job coordinator (28,179 EUR per year, pre-tax.)
Traffic supervisor (32,066 EUR per year, pre-tax.)
Paint shop manager (73,817 EUR per year, pre-tax.)
Apprentice bricklayer (38,409 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=germany&job=process-control-technician'><img src='https://optisalary.com/wp-content/graphs/salary/process-control-technician-salary-in-germany-2025.jpg' alt='process control technician salary in germany 2025' title='process control technician salary in germany 2025' /></a>
Please note:This website presents salary estimates for informational purposes only.
This website provides salary data exclusively for reference purposes. While we endeavor for correctness, we cannot ensure the validity of all figures. Users should double-check salary details with reliable organizations before making financial plans. Salary amounts can vary based on multiple elements, such as geographic location, experience, and job role. We assume no responsibility for errors in the salary figures provided. By using this website, you accept that salary data is subject to change.
Salary details displayed on optisalary.com are meant for reference purposes only. Our data is sourced through various inputs and may not always be up to date. Users should verify salary information through other means before making financial decisions. The figures listed here may fluctuate due to factors such as company policies, experience levels, and demand shifts. We do not guarantee that the data provided is flawless. By using optisalary.com, you agree that salary information is offered 'as is' and without warranties.