Home > Salary > Finland > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 42,450 EUR
Estimated Monthly Salary: 3,538 EUR
Estimated Weekly Salary: 816 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,407 EUR
Estimated Weekly Salary: 786 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 42,282 USD
Estimated Monthly Salary: 3,524 USD
Estimated Weekly Salary: 813 USD per week
Estimated Hourly Salary: 20 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 42,450 EUR
Estimated Monthly Salary: 3,538 EUR
Estimated Weekly Salary: 816 EUR per week
Estimated Hourly Salary: 20 EUR per hour
By working as Mechanical Calibration Technician a person can save up to 1,349 USD per month or 16,189 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Finland, see costs of living in Finland.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Vending machine technician (25,352 EUR per year, pre-tax.)
Refractive surgery coordinator (38,127 EUR per year, pre-tax.)
Garde manager (24,040 EUR per year, pre-tax.)
Audio engineer (41,552 EUR per year, pre-tax.)
Truancy officer (33,143 EUR per year, pre-tax.)
Mechanical Calibration Technician salary in Finland
Average Yearly Salary of Mechanical Calibration Technician in Finland is approximately 42,450 EUR (42,282 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?

Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 42,450 EUR
Estimated Monthly Salary: 3,538 EUR
Estimated Weekly Salary: 816 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Comparing salary to last year:
Estimated Yearly Salary: 40,884 EUREstimated Monthly Salary: 3,407 EUR
Estimated Weekly Salary: 786 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 42,282 USD
Estimated Monthly Salary: 3,524 USD
Estimated Weekly Salary: 813 USD per week
Estimated Hourly Salary: 20 USD per hour
Difference in salary year over year or average salary increase is approximately
About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Finland, officially known as the Republic of Finland, is a Nordic country located in Northern Europe. With a population of approximately 5.5 million people, it is one of the most sparsely populated countries in Europe. Covering an area of around 338,455 square kilometers, it is the eighth largest country in Europe.
Estimated national average yearly salary is 49,468 EUR (54,360 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Finland.
Comparison shows that a person working as Mechanical Calibration Technician in Finland earns on average:
0.86 times the average salary (or 86% of average salary).
Estimated national average yearly salary is 49,468 EUR (54,360 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Finland.
Comparison shows that a person working as Mechanical Calibration Technician in Finland earns on average:
0.86 times the average salary (or 86% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 46,695 EUR and 61,553 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Finland?
Living in Finland the approximate monthly expenses are: 2,174 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 42,450 EUR
Estimated Monthly Salary: 3,538 EUR
Estimated Weekly Salary: 816 EUR per week
Estimated Hourly Salary: 20 EUR per hour
By working as Mechanical Calibration Technician a person can save up to 1,349 USD per month or 16,189 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Finland, see costs of living in Finland.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Sweden, Norway, Russia, Estonia. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
- 6 to 10 years of experience yields
- 11 to 15 years of experience yields
- 16 to 25 years of experience yields
- more than 25 years of experience yields
Top 10 highest salaries in Finland
(567,124 EUR per year, pre-tax.)
2. Cardiologist
(472,971 EUR per year, pre-tax.)
(455,823 EUR per year, pre-tax.)
(442,923 EUR per year, pre-tax.)
5. Neurosurgeon
(440,800 EUR per year, pre-tax.)
6. Oncologist
(432,475 EUR per year, pre-tax.)
(431,745 EUR per year, pre-tax.)
(431,039 EUR per year, pre-tax.)
(430,553 EUR per year, pre-tax.)
(430,511 EUR per year, pre-tax.)
Random salary:
Vending machine technician (25,352 EUR per year, pre-tax.)
Refractive surgery coordinator (38,127 EUR per year, pre-tax.)
Garde manager (24,040 EUR per year, pre-tax.)
Audio engineer (41,552 EUR per year, pre-tax.)
Truancy officer (33,143 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.

This website presents salary estimates for informational purposes only.
optisalary.com aggregates salary information for reference use only. While we endeavor to deliver accurate figures, we cannot warrant their full reliability. Users are strongly advised to check with other sources before finalizing financial decisions. Salary figures vary based on several factors, such as location, job role, and individual qualifications. We make no guarantees as to the validity of the provided information. Your use of this site indicates acceptance of this notice.
optisalary.com aggregates salary data for informational purposes exclusively. We attempt to provide reliable figures, but do not guarantee their precision. Users are encouraged to check official sources before making employment choices. Salary amounts can vary due to company policies, market demands, and skills. We accept no responsibility for inconsistencies in the salary information provided. Your continued use with this site confirms agreement of this policy.