Home > Salary > Egypt > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 105,335 EGP
Estimated Monthly Salary: 8,778 EGP
Estimated Weekly Salary: 2,026 EGP per week
Estimated Hourly Salary: 51 EGP per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 8,481 EGP
Estimated Weekly Salary: 1,957 EGP per week
Estimated Hourly Salary: 49 EGP per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 3,181 USD
Estimated Monthly Salary: 265 USD
Estimated Weekly Salary: 61 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 105,335 EGP
Estimated Monthly Salary: 8,778 EGP
Estimated Weekly Salary: 2,026 EGP per week
Estimated Hourly Salary: 51 EGP per hour
By working as Mechanical Calibration Technician a person can save up to 101 USD per month or 1,213 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Egypt, see costs of living in Egypt.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Agricultural inspector (110,616 EGP per year, pre-tax.)
Junior mechanical engineer (166,541 EGP per year, pre-tax.)
Manufacturing engineer medical devices (203,417 EGP per year, pre-tax.)
Paralegal supervisor (163,631 EGP per year, pre-tax.)
Data analyst 2 (164,551 EGP per year, pre-tax.)
Mechanical Calibration Technician salary in Egypt
Average Yearly Salary of Mechanical Calibration Technician in Egypt is approximately 105,335 EGP (3,181 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 105,335 EGP
Estimated Monthly Salary: 8,778 EGP
Estimated Weekly Salary: 2,026 EGP per week
Estimated Hourly Salary: 51 EGP per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 101,772 EGPEstimated Monthly Salary: 8,481 EGP
Estimated Weekly Salary: 1,957 EGP per week
Estimated Hourly Salary: 49 EGP per hour
Last revision of data: 2024-01-03Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 3,181 USD
Estimated Monthly Salary: 265 USD
Estimated Weekly Salary: 61 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Egypt is a country located in northeastern Africa. It is bordered by the Mediterranean Sea to the north, Sudan to the south, Libya to the west, and Israel and the Red Sea to the east. With a population of over 100 million people, Egypt is the most populous country in the Arab world and the third most populous in Africa. The country covers an area of approximately 1,001,450 square kilometers, making it the 30th largest country in the world.
Estimated national average yearly salary is 125,870 EGP (4,100 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Egypt.
Comparison shows that a person working as Mechanical Calibration Technician in Egypt earns on average:
0.84 times the average salary (or 84% of average salary).
Estimated national average yearly salary is 125,870 EGP (4,100 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Egypt.
Comparison shows that a person working as Mechanical Calibration Technician in Egypt earns on average:
0.84 times the average salary (or 84% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 115,869 EGP and 152,736 EGP. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Egypt?
Living in Egypt the approximate monthly expenses are: 164 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 105,335 EGP
Estimated Monthly Salary: 8,778 EGP
Estimated Weekly Salary: 2,026 EGP per week
Estimated Hourly Salary: 51 EGP per hour
By working as Mechanical Calibration Technician a person can save up to 101 USD per month or 1,213 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Egypt, see costs of living in Egypt.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Sudan, Libya, Israel, Palestine, Jordan, Saudi Arabia. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Sudan is 591 USD
Israel is 42,444 USD
Jordan is 7,369 USD
Saudi Arabia is 21,515 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Egypt
(1,412,052 EGP per year, pre-tax.)
2. Cardiologist
(1,175,406 EGP per year, pre-tax.)
(1,134,944 EGP per year, pre-tax.)
4. Neurosurgeon
(1,099,654 EGP per year, pre-tax.)
(1,099,601 EGP per year, pre-tax.)
6. Oncologist
(1,077,110 EGP per year, pre-tax.)
(1,074,437 EGP per year, pre-tax.)
(1,074,313 EGP per year, pre-tax.)
(1,072,829 EGP per year, pre-tax.)
(1,071,663 EGP per year, pre-tax.)
Data as of 2025Random salary:
Agricultural inspector (110,616 EGP per year, pre-tax.)
Junior mechanical engineer (166,541 EGP per year, pre-tax.)
Manufacturing engineer medical devices (203,417 EGP per year, pre-tax.)
Paralegal supervisor (163,631 EGP per year, pre-tax.)
Data analyst 2 (164,551 EGP per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=egypt&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-egypt-2025.jpg' alt='mechanical calibration technician salary in egypt 2025' title='mechanical calibration technician salary in egypt 2025' /></a>
Please note:The salary estimates on this website are meant for reference use only.
The salary estimates on optisalary.com are meant for reference purposes only. We collect salary data from multiple sources, but do not ensure absolute precision. Users must independently confirm salaries before making career commitments. Salary variations occur due to industry standards, demand shifts, and location. We deny any guarantee regarding the validity of the listed salary data. By using this site, you acknowledge that salary data is not definitive.
By visiting optisalary.com, you accept that salary details are not definitive.