Home > Salary > Ecuador > Plastic Sheet Metal Molds Technician
A plastic sheet metal molds technician is responsible for the fabrication, maintenance, and repair of molds used in the production of plastic sheet metal components. They work closely with engineers and designers to ensure that the molds are designed and constructed to meet specific requirements. This occupation requires strong technical skills and knowledge of various materials, such as plastic polymers and metals. The technician must be able to operate machinery and tools, including CNC machines, lathes, and grinders, to shape and finish the molds accurately. Additionally, they must possess problem-solving abilities to troubleshoot any issues that may arise during the molding process. Attention to detail, precision, and adherence to safety protocols are crucial in this occupation.
Estimated Yearly Salary: 94,883,844 ECS
Estimated Monthly Salary: 7,906,987 ECS
Estimated Weekly Salary: 1,824,689 ECS per week
Estimated Hourly Salary: 45,617 ECS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 7,616,679 ECS
Estimated Weekly Salary: 1,757,695 ECS per week
Estimated Hourly Salary: 43,942 ECS per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 3,348 USD
Estimated Monthly Salary: 279 USD
Estimated Weekly Salary: 64 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 94,883,844 ECS
Estimated Monthly Salary: 7,906,987 ECS
Estimated Weekly Salary: 1,824,689 ECS per week
Estimated Hourly Salary: 45,617 ECS per hour
By working as Plastic Sheet Metal Molds Technician a person can save up to 27 USD per month or 319 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ecuador, see costs of living in Ecuador.
Estimated Yearly Salary for Plastic Sheet Metal Molds Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Skip tracer (110,783,199 ECS per year, pre-tax.)
Hazardous materials removal worker (89,654,955 ECS per year, pre-tax.)
County deputy civil service (173,534,590 ECS per year, pre-tax.)
Company culture specialist (167,759,271 ECS per year, pre-tax.)
Budget analyst (221,882,213 ECS per year, pre-tax.)
Plastic Sheet Metal Molds Technician salary in Ecuador
Average Yearly Salary of Plastic Sheet Metal Molds Technician in Ecuador is approximately 94,883,844 ECS (3,348 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Plastic Sheet Metal Molds Technician do?
A plastic sheet metal molds technician is responsible for the fabrication, maintenance, and repair of molds used in the production of plastic sheet metal components. They work closely with engineers and designers to ensure that the molds are designed and constructed to meet specific requirements. This occupation requires strong technical skills and knowledge of various materials, such as plastic polymers and metals. The technician must be able to operate machinery and tools, including CNC machines, lathes, and grinders, to shape and finish the molds accurately. Additionally, they must possess problem-solving abilities to troubleshoot any issues that may arise during the molding process. Attention to detail, precision, and adherence to safety protocols are crucial in this occupation.
Skills: Plastic molding, Sheet metal fabrication, Mold technician, Mold maintenance, CNC machining, Precision engineering
Job industry: Manufacturing
Job industry: Manufacturing
How much does Plastic Sheet Metal Molds Technician make?
Salary details
How much does Plastic Sheet Metal Molds Technician make?Estimated Yearly Salary: 94,883,844 ECS
Estimated Monthly Salary: 7,906,987 ECS
Estimated Weekly Salary: 1,824,689 ECS per week
Estimated Hourly Salary: 45,617 ECS per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 91,400,143 ECSEstimated Monthly Salary: 7,616,679 ECS
Estimated Weekly Salary: 1,757,695 ECS per week
Estimated Hourly Salary: 43,942 ECS per hour
Last revision of data: 2024-01-03Plastic Sheet Metal Molds Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 3,348 USD
Estimated Monthly Salary: 279 USD
Estimated Weekly Salary: 64 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ecuador is a country located in South America, bordered by Colombia to the north, Peru to the east and south, and the Pacific Ocean to the west. It has a population of approximately 17 million people and covers an area of about 283,561 square kilometers.
Estimated national average yearly salary is 163,662,470 ECS (6,310 USD). Value indicated is pre-tax. Below graph shows estimated Plastic Sheet Metal Molds Technician job salary compared to average salary in Ecuador.
Comparison shows that a person working as Plastic Sheet Metal Molds Technician in Ecuador earns on average:
0.58 times the average salary (or 58% of average salary).
Estimated national average yearly salary is 163,662,470 ECS (6,310 USD). Value indicated is pre-tax. Below graph shows estimated Plastic Sheet Metal Molds Technician job salary compared to average salary in Ecuador.
Comparison shows that a person working as Plastic Sheet Metal Molds Technician in Ecuador earns on average:
0.58 times the average salary (or 58% of average salary).
Is Plastic Sheet Metal Molds Technician a well paid job?
No, our data shows that Plastic Sheet Metal Molds Technician is typically not a well-paid job. The salary varies based on experience. Meaning that even though Plastic Sheet Metal Molds Technician might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Plastic Sheet Metal Molds Technician?
High salary for Plastic Sheet Metal Molds Technician would be somewhere between 104,372,228 ECS and 137,581,574 ECS. However this is an estimation based on Gaussian Distribution.How much can you save working as Plastic Sheet Metal Molds Technician in Ecuador?
Living in Ecuador the approximate monthly expenses are: 252 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 94,883,844 ECS
Estimated Monthly Salary: 7,906,987 ECS
Estimated Weekly Salary: 1,824,689 ECS per week
Estimated Hourly Salary: 45,617 ECS per hour
By working as Plastic Sheet Metal Molds Technician a person can save up to 27 USD per month or 319 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ecuador, see costs of living in Ecuador.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Colombia, Peru. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Plastic Sheet Metal Molds Technician
Colombia is 3,446 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ecuador
(1,855,980,438 ECS per year, pre-tax.)
2. Cardiologist
(1,555,155,042 ECS per year, pre-tax.)
(1,492,481,780 ECS per year, pre-tax.)
4. Neurosurgeon
(1,451,252,556 ECS per year, pre-tax.)
(1,445,038,889 ECS per year, pre-tax.)
(1,418,984,151 ECS per year, pre-tax.)
(1,418,715,651 ECS per year, pre-tax.)
(1,416,409,138 ECS per year, pre-tax.)
9. Oncologist
(1,414,323,101 ECS per year, pre-tax.)
10. Urologist
(1,413,729,680 ECS per year, pre-tax.)
Data as of 2025Random salary:
Skip tracer (110,783,199 ECS per year, pre-tax.)
Hazardous materials removal worker (89,654,955 ECS per year, pre-tax.)
County deputy civil service (173,534,590 ECS per year, pre-tax.)
Company culture specialist (167,759,271 ECS per year, pre-tax.)
Budget analyst (221,882,213 ECS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ecuador&job=plastic-sheet-metal-molds-technician'><img src='https://optisalary.com/wp-content/graphs/salary/plastic-sheet-metal-molds-technician-salary-in-ecuador-2025.jpg' alt='plastic sheet metal molds technician salary in ecuador 2025' title='plastic sheet metal molds technician salary in ecuador 2025' /></a>
Please note:optisalary.com presents salary data for informational purposes exclusively.
Salary details displayed on this website are intended for reference use exclusively. Our data comes from various inputs and may not necessarily be up to date. Users must cross-reference salary information through other means before making financial decisions. The figures listed here may fluctuate due to factors such as company policies, experience levels, and demand shifts. We do not warrant that the data provided is error-free. By accessing this website, you accept that salary information is offered 'as is' and without warranties.
Salary information displayed on this site is informational exclusively. Our figures come from various sources, but we cannot guarantee absolute correctness. Users must always verify salary details with official platforms before making financial commitments. Salaries fluctuate due to individual experience, market demand, and employer policies. We cannot offer any warranties about the completeness of the provided salary data. By navigating this site, you agree these limitations.