Home > Salary > Ecuador > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 138,709,129 ECS
Estimated Monthly Salary: 11,559,094 ECS
Estimated Weekly Salary: 2,667,483 ECS per week
Estimated Hourly Salary: 66,687 ECS per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 11,181,181 ECS
Estimated Weekly Salary: 2,580,272 ECS per week
Estimated Hourly Salary: 64,507 ECS per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 4,924 USD
Estimated Monthly Salary: 410 USD
Estimated Weekly Salary: 95 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 138,709,129 ECS
Estimated Monthly Salary: 11,559,094 ECS
Estimated Weekly Salary: 2,667,483 ECS per week
Estimated Hourly Salary: 66,687 ECS per hour
By working as Mechanical Calibration Technician a person can save up to 158 USD per month or 1,895 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ecuador, see costs of living in Ecuador.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Conveyor operator (99,174,668 ECS per year, pre-tax.)
Sports lawyer (342,135,482 ECS per year, pre-tax.)
Associate business analyst retail (192,885,991 ECS per year, pre-tax.)
Watchmaker (151,854,225 ECS per year, pre-tax.)
Director of materials management hospital (298,847,227 ECS per year, pre-tax.)
Mechanical Calibration Technician salary in Ecuador
Average Yearly Salary of Mechanical Calibration Technician in Ecuador is approximately 138,709,129 ECS (4,924 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 138,709,129 ECS
Estimated Monthly Salary: 11,559,094 ECS
Estimated Weekly Salary: 2,667,483 ECS per week
Estimated Hourly Salary: 66,687 ECS per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 134,174,166 ECSEstimated Monthly Salary: 11,181,181 ECS
Estimated Weekly Salary: 2,580,272 ECS per week
Estimated Hourly Salary: 64,507 ECS per hour
Last revision of data: 2024-01-09Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 4,924 USD
Estimated Monthly Salary: 410 USD
Estimated Weekly Salary: 95 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Ecuador is a country located in South America, bordered by Colombia to the north, Peru to the east and south, and the Pacific Ocean to the west. It has a population of approximately 17 million people and covers an area of about 283,561 square kilometers.
Estimated national average yearly salary is 163,662,470 ECS (6,310 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Ecuador.
Comparison shows that a person working as Mechanical Calibration Technician in Ecuador earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 163,662,470 ECS (6,310 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Ecuador.
Comparison shows that a person working as Mechanical Calibration Technician in Ecuador earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 152,580,042 ECS and 201,128,237 ECS. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Ecuador?
Living in Ecuador the approximate monthly expenses are: 252 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 138,709,129 ECS
Estimated Monthly Salary: 11,559,094 ECS
Estimated Weekly Salary: 2,667,483 ECS per week
Estimated Hourly Salary: 66,687 ECS per hour
By working as Mechanical Calibration Technician a person can save up to 158 USD per month or 1,895 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Ecuador, see costs of living in Ecuador.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Colombia, Peru. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Colombia is 5,048 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Ecuador
(1,855,980,438 ECS per year, pre-tax.)
2. Cardiologist
(1,555,155,042 ECS per year, pre-tax.)
(1,492,481,780 ECS per year, pre-tax.)
4. Neurosurgeon
(1,451,252,556 ECS per year, pre-tax.)
(1,445,038,889 ECS per year, pre-tax.)
(1,418,984,151 ECS per year, pre-tax.)
(1,418,715,651 ECS per year, pre-tax.)
(1,416,409,138 ECS per year, pre-tax.)
9. Oncologist
(1,414,323,101 ECS per year, pre-tax.)
10. Urologist
(1,413,729,680 ECS per year, pre-tax.)
Data as of 2025Random salary:
Conveyor operator (99,174,668 ECS per year, pre-tax.)
Sports lawyer (342,135,482 ECS per year, pre-tax.)
Associate business analyst retail (192,885,991 ECS per year, pre-tax.)
Watchmaker (151,854,225 ECS per year, pre-tax.)
Director of materials management hospital (298,847,227 ECS per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=ecuador&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-ecuador-2025.jpg' alt='mechanical calibration technician salary in ecuador 2025' title='mechanical calibration technician salary in ecuador 2025' /></a>
Please note:The salary figures presented here are meant for informational purposes solely.
optisalary.com compiles salary information for educational use only. While we strive to present accurate figures, we do not ensure their full precision. Users are strongly advised to consult additional databases before finalizing financial plans. Salary figures vary based on several conditions, such as industry trends, negotiation power, and regional demand. We make no claims as to the correctness of the listed information. Your access of this site acknowledges acceptance of this notice.
Salary details displayed on optisalary.com are intended for informational use exclusively. Our data is sourced through multiple sources and may not necessarily be accurate. Users must verify salary information through other means before making employment decisions. The figures shown here may change due to factors such as company policies, experience levels, and demand shifts. We do not guarantee that the data provided is flawless. By using optisalary.com, you accept that salary information is presented 'as is' and without assurances.