Home > Salary > Denmark > Sheetrock Taper
A sheetrock taper, also known as a drywall taper or finisher, is a skilled tradesperson who specializes in applying and finishing drywall joints and seams. Their primary job is to ensure that the walls and ceilings have a smooth and seamless appearance before painting or wallpapering.
Sheetrock tapers use a variety of tools such as taping knives, mud pans, and sanders to apply joint compound, tape, and corner bead to cover and reinforce joints between drywall panels. They meticulously smooth out the compound, feathering the edges to create a seamless finish. They also patch any imperfections, cracks, or holes in the drywall surface.
This occupation requires attention to detail, physical stamina, and the ability to work efficiently. Sheetrock tapers often work on construction sites, residential or commercial buildings, and may collaborate with other tradespeople such as carpenters, painters, and plumbers.
Estimated Yearly Salary: 397,450 DKK
Estimated Monthly Salary: 33,121 DKK
Estimated Weekly Salary: 7,643 DKK per week
Estimated Hourly Salary: 191 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 57,016 USD
Estimated Monthly Salary: 4,751 USD
Estimated Weekly Salary: 1,096 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 397,450 DKK
Estimated Monthly Salary: 33,121 DKK
Estimated Weekly Salary: 7,643 DKK per week
Estimated Hourly Salary: 191 DKK per hour
By working as Sheetrock Taper a person can save up to 1,823 USD per month or 21,880 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Sheetrock Taper
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Infection control practitioner (icp) (603,132 DKK per year, pre-tax.)
Talent management coordinator (480,326 DKK per year, pre-tax.)
Hr business associate (709,317 DKK per year, pre-tax.)
Quality assurance laboratory technician (368,620 DKK per year, pre-tax.)
Avionics test technician (380,236 DKK per year, pre-tax.)
Sheetrock Taper salary in Denmark
Average Yearly Salary of Sheetrock Taper in Denmark is approximately 397,450 DKK (57,016 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Sheetrock Taper do?
A sheetrock taper, also known as a drywall taper or finisher, is a skilled tradesperson who specializes in applying and finishing drywall joints and seams. Their primary job is to ensure that the walls and ceilings have a smooth and seamless appearance before painting or wallpapering.
Sheetrock tapers use a variety of tools such as taping knives, mud pans, and sanders to apply joint compound, tape, and corner bead to cover and reinforce joints between drywall panels. They meticulously smooth out the compound, feathering the edges to create a seamless finish. They also patch any imperfections, cracks, or holes in the drywall surface.
This occupation requires attention to detail, physical stamina, and the ability to work efficiently. Sheetrock tapers often work on construction sites, residential or commercial buildings, and may collaborate with other tradespeople such as carpenters, painters, and plumbers.
Skills: sheetrock taper, drywall taper, drywall finisher, drywall joint specialist, construction tradesperson, interior finishing.
Job industry: Construction
Job industry: Construction
How much does Sheetrock Taper make?
Salary details
How much does Sheetrock Taper make?Estimated Yearly Salary: 397,450 DKK
Estimated Monthly Salary: 33,121 DKK
Estimated Weekly Salary: 7,643 DKK per week
Estimated Hourly Salary: 191 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 385,378 DKKEstimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-07Sheetrock Taper estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 57,016 USD
Estimated Monthly Salary: 4,751 USD
Estimated Weekly Salary: 1,096 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Sheetrock Taper job salary compared to average salary in Denmark.
Comparison shows that a person working as Sheetrock Taper in Denmark earns on average:
0.8 times the average salary (or 80% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Sheetrock Taper job salary compared to average salary in Denmark.
Comparison shows that a person working as Sheetrock Taper in Denmark earns on average:
0.8 times the average salary (or 80% of average salary).
Is Sheetrock Taper a well paid job?
No / we do not have enough data to assess this.What is considered a high salary for Sheetrock Taper?
High salary for Sheetrock Taper would be somewhere between 437,195 DKK and 576,303 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Sheetrock Taper in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 397,450 DKK
Estimated Monthly Salary: 33,121 DKK
Estimated Weekly Salary: 7,643 DKK per week
Estimated Hourly Salary: 191 DKK per hour
By working as Sheetrock Taper a person can save up to 1,823 USD per month or 21,880 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Sheetrock Taper
Germany is 41,665 USD
Sweden is 48,928 USD
Norway is 74,104 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Infection control practitioner (icp) (603,132 DKK per year, pre-tax.)
Talent management coordinator (480,326 DKK per year, pre-tax.)
Hr business associate (709,317 DKK per year, pre-tax.)
Quality assurance laboratory technician (368,620 DKK per year, pre-tax.)
Avionics test technician (380,236 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=sheetrock-taper'><img src='https://optisalary.com/wp-content/graphs/salary/sheetrock-taper-salary-in-denmark-2025.jpg' alt='sheetrock taper salary in denmark 2025' title='sheetrock taper salary in denmark 2025' /></a>
Please note:The salary estimates on this website are meant for reference purposes exclusively.
The salary data on this site is intended for informational purposes exclusively. We offer salary insights based on multiple datasets, but do not guarantee absolute precision. Users should always verify salary details with other reliable sources before making career-related decisions. Fluctuations in salary figures may occur due to various factors, including location, experience, and industry. We do not extend any warranty regarding the entirety of the displayed salary information. Use of optisalary.com implies acknowledgment of these terms.
The salary data on this site is intended for reference purposes only. We offer salary insights derived from multiple sources, but cannot guarantee complete accuracy. Users should consistently verify salary details with other reliable sources before making financial choices. Fluctuations in salary amounts may arise due to several factors, including location, experience, and industry. We do not extend any guarantee regarding the completeness of the displayed salary information. Use of optisalary.com implies acknowledgment of these conditions.