Home > Salary > Denmark > Sheet Metal Worker Apprentice
A sheet metal worker apprentice is an individual who is training to become a skilled tradesperson in the field of sheet metal work. They work under the guidance and supervision of experienced sheet metal workers to learn the necessary skills and techniques involved in fabricating, installing, and repairing sheet metal products. This occupation requires physical strength, manual dexterity, and attention to detail.
The responsibilities of a sheet metal worker apprentice include measuring and cutting sheet metal, shaping it using various tools and equipment, assembling and welding components, and installing finished products such as ductwork, roofing, and siding. They may also be involved in reading blueprints, estimating material requirements, and maintaining equipment.
Estimated Yearly Salary: 334,444 DKK
Estimated Monthly Salary: 27,870 DKK
Estimated Weekly Salary: 6,432 DKK per week
Estimated Hourly Salary: 161 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 26,995 DKK
Estimated Weekly Salary: 6,230 DKK per week
Estimated Hourly Salary: 156 DKK per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 48,034 USD
Estimated Monthly Salary: 4,003 USD
Estimated Weekly Salary: 924 USD per week
Estimated Hourly Salary: 23 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 334,444 DKK
Estimated Monthly Salary: 27,870 DKK
Estimated Weekly Salary: 6,432 DKK per week
Estimated Hourly Salary: 161 DKK per hour
By working as Sheet Metal Worker Apprentice a person can save up to 1,075 USD per month or 12,898 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Sheet Metal Worker Apprentice
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Dj (458,905 DKK per year, pre-tax.)
Business analyst software (711,744 DKK per year, pre-tax.)
Director of strategic planning (1,264,012 DKK per year, pre-tax.)
Audiometric technician (272,045 DKK per year, pre-tax.)
Enterprise architect (1,178,471 DKK per year, pre-tax.)
Sheet Metal Worker Apprentice salary in Denmark
Average Yearly Salary of Sheet Metal Worker Apprentice in Denmark is approximately 334,444 DKK (48,034 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Sheet Metal Worker Apprentice do?
A sheet metal worker apprentice is an individual who is training to become a skilled tradesperson in the field of sheet metal work. They work under the guidance and supervision of experienced sheet metal workers to learn the necessary skills and techniques involved in fabricating, installing, and repairing sheet metal products. This occupation requires physical strength, manual dexterity, and attention to detail.
The responsibilities of a sheet metal worker apprentice include measuring and cutting sheet metal, shaping it using various tools and equipment, assembling and welding components, and installing finished products such as ductwork, roofing, and siding. They may also be involved in reading blueprints, estimating material requirements, and maintaining equipment.
Skills: sheet metal, apprentice, tradesperson, fabrication, installation, repair
Job industry: Construction
Job industry: Construction
How much does Sheet Metal Worker Apprentice make?
Salary details
How much does Sheet Metal Worker Apprentice make?Estimated Yearly Salary: 334,444 DKK
Estimated Monthly Salary: 27,870 DKK
Estimated Weekly Salary: 6,432 DKK per week
Estimated Hourly Salary: 161 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 323,939 DKKEstimated Monthly Salary: 26,995 DKK
Estimated Weekly Salary: 6,230 DKK per week
Estimated Hourly Salary: 156 DKK per hour
Last revision of data: 2024-01-08Sheet Metal Worker Apprentice estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 48,034 USD
Estimated Monthly Salary: 4,003 USD
Estimated Weekly Salary: 924 USD per week
Estimated Hourly Salary: 23 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Sheet Metal Worker Apprentice job salary compared to average salary in Denmark.
Comparison shows that a person working as Sheet Metal Worker Apprentice in Denmark earns on average:
0.68 times the average salary (or 68% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Sheet Metal Worker Apprentice job salary compared to average salary in Denmark.
Comparison shows that a person working as Sheet Metal Worker Apprentice in Denmark earns on average:
0.68 times the average salary (or 68% of average salary).
Is Sheet Metal Worker Apprentice a well paid job?
No, our data shows that Sheet Metal Worker Apprentice is typically not a well-paid job. The salary varies based on experience. Meaning that even though Sheet Metal Worker Apprentice might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Sheet Metal Worker Apprentice?
High salary for Sheet Metal Worker Apprentice would be somewhere between 367,888 DKK and 484,944 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Sheet Metal Worker Apprentice in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 334,444 DKK
Estimated Monthly Salary: 27,870 DKK
Estimated Weekly Salary: 6,432 DKK per week
Estimated Hourly Salary: 161 DKK per hour
By working as Sheet Metal Worker Apprentice a person can save up to 1,075 USD per month or 12,898 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Sheet Metal Worker Apprentice
Germany is 34,978 USD
Sweden is 41,095 USD
Norway is 62,459 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Dj (458,905 DKK per year, pre-tax.)
Business analyst software (711,744 DKK per year, pre-tax.)
Director of strategic planning (1,264,012 DKK per year, pre-tax.)
Audiometric technician (272,045 DKK per year, pre-tax.)
Enterprise architect (1,178,471 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=sheet-metal-worker-apprentice'><img src='https://optisalary.com/wp-content/graphs/salary/sheet-metal-worker-apprentice-salary-in-denmark-2025.jpg' alt='sheet metal worker apprentice salary in denmark 2025' title='sheet metal worker apprentice salary in denmark 2025' /></a>
Please note:The salary data presented here are meant for reference purposes only.
optisalary.com displays salary data exclusively for reference use. While we strive for accuracy, we do not guarantee the validity of all figures. Users must verify salary details with reliable sources before making career-related decisions. Salary amounts may fluctuate based on numerous factors, such as geographic location, experience, and job role. We accept no responsibility for misinterpretations in the salary estimates provided. By accessing optisalary.com, you accept that salary data is subject to change.
By using this website, you accept that salary details are subject to change.