Home > Salary > Denmark > Molding Machine Operator
A molding machine operator is responsible for operating and maintaining machinery used in the manufacturing process of molded products. They work in various industries such as plastics, rubber, metal, or glass, depending on the type of molding machine they operate. Their primary duty is to set up the machine, load raw materials into the machine, adjust settings, and monitor the production process to ensure quality and efficiency. They also perform routine maintenance tasks, troubleshoot issues, and make necessary adjustments to achieve optimal performance. Molding machine operators need to have a good understanding of machine operation, safety protocols, and basic maintenance procedures. They should possess technical skills, attention to detail, and the ability to work in a fast-paced environment.
Estimated Yearly Salary: 293,866 DKK
Estimated Monthly Salary: 24,489 DKK
Estimated Weekly Salary: 5,651 DKK per week
Estimated Hourly Salary: 141 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 23,737 DKK
Estimated Weekly Salary: 5,478 DKK per week
Estimated Hourly Salary: 137 DKK per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 42,110 USD
Estimated Monthly Salary: 3,509 USD
Estimated Weekly Salary: 810 USD per week
Estimated Hourly Salary: 20 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 293,866 DKK
Estimated Monthly Salary: 24,489 DKK
Estimated Weekly Salary: 5,651 DKK per week
Estimated Hourly Salary: 141 DKK per hour
By working as Molding Machine Operator a person can save up to 581 USD per month or 6,974 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Molding Machine Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Boiler mechanic (469,154 DKK per year, pre-tax.)
Intellectual property (ip), paralegal (681,387 DKK per year, pre-tax.)
Forklift operator (317,093 DKK per year, pre-tax.)
Grinding operator (307,181 DKK per year, pre-tax.)
Business development analyst (489,499 DKK per year, pre-tax.)
Molding Machine Operator salary in Denmark
Average Yearly Salary of Molding Machine Operator in Denmark is approximately 293,866 DKK (42,110 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Molding Machine Operator do?
A molding machine operator is responsible for operating and maintaining machinery used in the manufacturing process of molded products. They work in various industries such as plastics, rubber, metal, or glass, depending on the type of molding machine they operate. Their primary duty is to set up the machine, load raw materials into the machine, adjust settings, and monitor the production process to ensure quality and efficiency. They also perform routine maintenance tasks, troubleshoot issues, and make necessary adjustments to achieve optimal performance. Molding machine operators need to have a good understanding of machine operation, safety protocols, and basic maintenance procedures. They should possess technical skills, attention to detail, and the ability to work in a fast-paced environment.
Skills: molding machine operator, manufacturing, machinery operation, quality control, maintenance, troubleshooting
Job industry: Manufacturing
Job industry: Manufacturing
How much does Molding Machine Operator make?
Salary details
How much does Molding Machine Operator make?Estimated Yearly Salary: 293,866 DKK
Estimated Monthly Salary: 24,489 DKK
Estimated Weekly Salary: 5,651 DKK per week
Estimated Hourly Salary: 141 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 284,844 DKKEstimated Monthly Salary: 23,737 DKK
Estimated Weekly Salary: 5,478 DKK per week
Estimated Hourly Salary: 137 DKK per hour
Last revision of data: 2024-01-05Molding Machine Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 42,110 USD
Estimated Monthly Salary: 3,509 USD
Estimated Weekly Salary: 810 USD per week
Estimated Hourly Salary: 20 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Molding Machine Operator job salary compared to average salary in Denmark.
Comparison shows that a person working as Molding Machine Operator in Denmark earns on average:
0.59 times the average salary (or 59% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Molding Machine Operator job salary compared to average salary in Denmark.
Comparison shows that a person working as Molding Machine Operator in Denmark earns on average:
0.59 times the average salary (or 59% of average salary).
Is Molding Machine Operator a well paid job?
No, our data shows that Molding Machine Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Molding Machine Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Molding Machine Operator?
High salary for Molding Machine Operator would be somewhere between 323,253 DKK and 426,106 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Molding Machine Operator in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 293,866 DKK
Estimated Monthly Salary: 24,489 DKK
Estimated Weekly Salary: 5,651 DKK per week
Estimated Hourly Salary: 141 DKK per hour
By working as Molding Machine Operator a person can save up to 581 USD per month or 6,974 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Molding Machine Operator
Germany is 30,830 USD
Sweden is 36,160 USD
Norway is 54,906 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Boiler mechanic (469,154 DKK per year, pre-tax.)
Intellectual property (ip), paralegal (681,387 DKK per year, pre-tax.)
Forklift operator (317,093 DKK per year, pre-tax.)
Grinding operator (307,181 DKK per year, pre-tax.)
Business development analyst (489,499 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=molding-machine-operator'><img src='https://optisalary.com/wp-content/graphs/salary/molding-machine-operator-salary-in-denmark-2025.jpg' alt='molding machine operator salary in denmark 2025' title='molding machine operator salary in denmark 2025' /></a>
Please note:The salary figures presented here are meant for informational purposes only.
Salary details presented on optisalary.com are meant for informational use only. Our data is sourced through various inputs and may not necessarily be accurate. Users must verify salary information through other means before making employment commitments. The figures listed here may fluctuate due to variables such as location, industry standards, and individual skill sets. We do not guarantee that the information displayed is error-free. By accessing optisalary.com, you agree that salary information is presented 'as is' and without warranties.
The salary data on this site is designed for informational purposes exclusively. We provide salary insights based on multiple sources, but cannot guarantee complete precision. Users should always cross-check salary details with other trusted sources before making career-related choices. Variations in salary amounts may arise due to various factors, including company policies, market demand, and individual skills. We do not extend any warranty regarding the completeness of the displayed salary data. Use of optisalary.com implies acknowledgment of these conditions.