Home > Salary > Denmark > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 398,682 DKK
Estimated Monthly Salary: 33,224 DKK
Estimated Weekly Salary: 7,667 DKK per week
Estimated Hourly Salary: 192 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 57,058 USD
Estimated Monthly Salary: 4,755 USD
Estimated Weekly Salary: 1,097 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 398,682 DKK
Estimated Monthly Salary: 33,224 DKK
Estimated Weekly Salary: 7,667 DKK per week
Estimated Hourly Salary: 192 DKK per hour
By working as Mechanical Calibration Technician a person can save up to 1,827 USD per month or 21,922 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Plant manager manufacturing (738,619 DKK per year, pre-tax.)
Copy center supervisor (262,500 DKK per year, pre-tax.)
Workforce development specialist (435,272 DKK per year, pre-tax.)
Sales estimator (464,949 DKK per year, pre-tax.)
Midwife (636,706 DKK per year, pre-tax.)
Mechanical Calibration Technician salary in Denmark
Average Yearly Salary of Mechanical Calibration Technician in Denmark is approximately 398,682 DKK (57,058 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 398,682 DKK
Estimated Monthly Salary: 33,224 DKK
Estimated Weekly Salary: 7,667 DKK per week
Estimated Hourly Salary: 192 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 385,378 DKKEstimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-02Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 57,058 USD
Estimated Monthly Salary: 4,755 USD
Estimated Weekly Salary: 1,097 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Denmark.
Comparison shows that a person working as Mechanical Calibration Technician in Denmark earns on average:
0.81 times the average salary (or 81% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Denmark.
Comparison shows that a person working as Mechanical Calibration Technician in Denmark earns on average:
0.81 times the average salary (or 81% of average salary).
Is Mechanical Calibration Technician a well paid job?
No / we do not have enough data to assess this.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 438,550 DKK and 578,089 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 398,682 DKK
Estimated Monthly Salary: 33,224 DKK
Estimated Weekly Salary: 7,667 DKK per week
Estimated Hourly Salary: 192 DKK per hour
By working as Mechanical Calibration Technician a person can save up to 1,827 USD per month or 21,922 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Germany is 41,697 USD
Sweden is 49,206 USD
Norway is 74,088 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Plant manager manufacturing (738,619 DKK per year, pre-tax.)
Copy center supervisor (262,500 DKK per year, pre-tax.)
Workforce development specialist (435,272 DKK per year, pre-tax.)
Sales estimator (464,949 DKK per year, pre-tax.)
Midwife (636,706 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-denmark-2025.jpg' alt='mechanical calibration technician salary in denmark 2025' title='mechanical calibration technician salary in denmark 2025' /></a>
Please note:The salary estimates on optisalary.com are meant for reference use only.
Salary details presented on optisalary.com are intended for reference purposes only. Our data comes from multiple sources and may not necessarily be accurate. Users should cross-reference salary information independently before making employment commitments. The figures shown here may fluctuate due to variables such as location, industry standards, and individual skill sets. We cannot guarantee that the information displayed is flawless. By using optisalary.com, you agree that salary information is offered 'as is' and without assurances.
This website offers salary insights for informational purposes exclusively. While we gather data from multiple sources, we cannot ensure absolute reliability. Users are advised to consult external organizations before making any career moves. Salaries fluctuate due to various factors, such as experience, industry trends, and negotiation tactics. We cannot provide guarantee regarding the correctness of the displayed salary data. Your continued access of this site indicates your understanding of these terms.